| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1317263341-19010-2-git-send-email-Gang.Liu@freescale.com>
Date: Thu, 29 Sep 2011 10:28:59 +0800
From: Liu Gang <Gang.Liu@...escale.com>
To: <linuxppc-dev@...ts.ozlabs.org>
CC: <akpm@...ux-foundation.org>, <linux-kernel@...r.kernel.org>,
<r58472@...escale.com>, <B11780@...escale.com>,
<r61911@...escale.com>, Liu Gang <Gang.Liu@...escale.com>,
Li Yang <leoli@...escale.com>, Jin Qing <b24347@...escale.com>
Subject: [PATCH 2/4] fsl-rio: Add two ports and rapidio message units support
Usually, freescale rapidio endpoint can support one 1X or two 4X LP-Serial link interfaces,
and rapidio message transactions can be implemented by two message units. This patch adds the
support of two rapidio ports and initializes message unit 0 and message unit 1. And these ports
and message units can work simultaneously.
Signed-off-by: Li Yang <leoli@...escale.com>
Signed-off-by: Jin Qing <b24347@...escale.com>
Signed-off-by: Liu Gang <Gang.Liu@...escale.com>
---
arch/powerpc/sysdev/fsl_rio.c | 336 +++++++++++++++++++++----------
arch/powerpc/sysdev/fsl_rio.h | 73 +++++++-
arch/powerpc/sysdev/fsl_rmu.c | 434 ++++++++++++++++++++---------------------
3 files changed, 502 insertions(+), 341 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 9484484..c7f8080 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -45,7 +45,6 @@
#define RIO_PORT1_IECSR 0x10130
#define RIO_PORT2_IECSR 0x101B0
-#define RIO_ATMU_REGS_OFFSET 0x10c00
#define RIO_GCCSR 0x13c
#define RIO_ESCSR 0x158
#define ESCSR_CLEAR 0x07120204
@@ -74,6 +73,11 @@
: "b" (addr), "i" (-EFAULT), "0" (err))
void __iomem *rio_regs_win;
+void __iomem *rmu_regs_win;
+resource_size_t rio_law_start;
+
+struct fsl_rio_dbell *dbell;
+struct fsl_rio_pw *pw;
#ifdef CONFIG_E500
int fsl_rio_mcheck_exception(struct pt_regs *regs)
@@ -120,7 +124,7 @@ static int fsl_local_config_read(struct rio_mport *mport,
{
struct rio_priv *priv = mport->priv;
pr_debug("fsl_local_config_read: index %d offset %8.8x\n", index,
- offset);
+ offset);
*data = in_be32(priv->regs_win + offset);
return 0;
@@ -173,7 +177,7 @@ fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid,
pr_debug
("fsl_rio_config_read:"
" index %d destid %d hopcount %d offset %8.8x len %d\n",
- index, destid, hopcount, offset, len);
+ index, destid, hopcount, offset, len);
/* 16MB maintenance window possible */
/* allow only aligned access to maintenance registers */
@@ -230,8 +234,8 @@ fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
u8 *data;
pr_debug
("fsl_rio_config_write:"
- "index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
- index, destid, hopcount, offset, len, val);
+ " index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
+ index, destid, hopcount, offset, len, val);
/* 16MB maintenance windows possible */
/* allow only aligned access to maintenance registers */
@@ -260,7 +264,7 @@ fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
return 0;
}
-void fsl_rio_port_error_handler(struct rio_mport *port, int offset)
+void fsl_rio_port_error_handler(int offset)
{
/*XXX: Error recovery is not implemented, we just clear errors */
out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
@@ -331,12 +335,17 @@ int fsl_rio_setup(struct platform_device *dev)
struct rio_mport *port;
struct rio_priv *priv;
int rc = 0;
- const u32 *dt_range, *cell;
- struct resource regs;
- int rlen;
+ const u32 *dt_range, *cell, *ports_num;
+ u32 active_ports = 0;
+ struct resource regs, rmu_regs;
+ struct device_node *np, *rmu_node;
+ int rlen, len;
u32 ccsr;
u64 law_start, law_size;
int paw, aw, sw;
+ int i;
+ static int tmp;
+ struct device_node *rmu_np[MAX_MSG_UNIT_NUM] = {NULL};
if (!dev->dev.of_node) {
dev_err(&dev->dev, "Device OF-Node is NULL");
@@ -360,6 +369,14 @@ int fsl_rio_setup(struct platform_device *dev)
return -EFAULT;
}
+ ports_num = of_get_property(dev->dev.of_node,
+ "fsl,rio-num-ports", &len);
+ if (!ports_num || len < sizeof(*ports_num)) {
+ dev_err(&dev->dev, "Can't get %s property 'rio-num-ports'\n",
+ dev->dev.of_node->full_name);
+ return -EFAULT;
+ }
+
/* Get node address wide */
cell = of_get_property(dev->dev.of_node, "#address-cells", NULL);
if (cell)
@@ -378,8 +395,17 @@ int fsl_rio_setup(struct platform_device *dev)
law_start = of_read_number(dt_range + aw, paw);
law_size = of_read_number(dt_range + aw + paw, sw);
+ rio_law_start = law_start;
+
dev_info(&dev->dev, "LAW start 0x%016llx, size 0x%016llx.\n",
law_start, law_size);
+ rio_regs_win = ioremap(regs.start, resource_size(®s));
+
+ if (!rio_regs_win) {
+ printk(KERN_ERR "Unable to map rio register window\n");
+ rc = -ENOMEM;
+ goto err_rio_regs;
+ }
ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL);
if (!ops) {
@@ -390,130 +416,224 @@ int fsl_rio_setup(struct platform_device *dev)
ops->lcwrite = fsl_local_config_write;
ops->cread = fsl_rio_config_read;
ops->cwrite = fsl_rio_config_write;
+ ops->dsend = fsl_rio_doorbell_send;
ops->pwenable = fsl_rio_pw_enable;
-
- port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
- if (!port) {
+ ops->open_outb_mbox = fsl_open_outb_mbox;
+ ops->open_inb_mbox = fsl_open_inb_mbox;
+ ops->close_outb_mbox = fsl_close_outb_mbox;
+ ops->close_inb_mbox = fsl_close_inb_mbox;
+ ops->add_outb_message = fsl_add_outb_message;
+ ops->add_inb_buffer = fsl_add_inb_buffer;
+ ops->get_inb_message = fsl_get_inb_message;
+
+ dbell = kzalloc(sizeof(struct fsl_rio_dbell), GFP_KERNEL);
+ if (!(dbell)) {
+ printk(KERN_ERR "Can't alloc memory for 'fsl_rio_dbell'\n");
rc = -ENOMEM;
- goto err_port;
+ goto err_dbell;
}
- port->index = 0;
-
- priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL);
- if (!priv) {
- printk(KERN_ERR "Can't alloc memory for 'priv'\n");
+ dbell->dev = &dev->dev;
+
+ dbell->bellirq = irq_of_parse_and_map(dev->dev.of_node, 2);
+ dev_info(&dev->dev, "bellirq: %d\n", dbell->bellirq);
+ dbell->dbell_regs = (struct rio_dbell_regs *)(rio_regs_win +
+ RIO_S_DBELL_REGS_OFFSET);
+ dbell->dbell_atmu_regs = (struct rio_atmu_regs *)(rio_regs_win +
+ RIO_ATMU_REGS_DBELL_OFFSET);
+ /* Configure outbound doorbell window */
+ out_be32(&dbell->dbell_atmu_regs->rowbar,
+ (law_start + RIO_MAINT_WIN_SIZE) >> 12);
+ /* 4k window size */
+ out_be32(&dbell->dbell_atmu_regs->rowar, DOORBELL_ROWAR_EN |
+ DOORBELL_ROWAR_NREAD | DOORBELL_ROWAR_RES |
+ DOORBELL_ROWAR_SIZE);
+ fsl_rio_doorbell_init(dbell);
+
+ pw = kzalloc(sizeof(struct fsl_rio_pw), GFP_KERNEL);
+ if (!(pw)) {
+ printk(KERN_ERR "Can't alloc memory for 'fsl_rio_pw'\n");
+ rc = -ENOMEM;
+ goto err_pw;
+ }
+ pw->dev = &dev->dev;
+ pw->pwirq = irq_of_parse_and_map(dev->dev.of_node, 0);
+ dev_info(&dev->dev, "pwirq: %d\n", pw->pwirq);
+ pw->pw_regs = (struct rio_pw_regs *)(rio_regs_win +
+ RIO_S_PW_REGS_OFFSET);
+ fsl_rio_port_write_init(pw);
+
+ rmu_node = of_parse_phandle(dev->dev.of_node, "rmu-handle", 0);
+ if (!rmu_node)
+ goto err_rmu;
+
+ rc = of_address_to_resource(rmu_node, 0, &rmu_regs);
+ if (rc) {
+ dev_err(&dev->dev, "Can't get %s property 'reg'\n",
+ rmu_node->full_name);
+ goto err_rmu;
+ }
+ rmu_regs_win = ioremap(rmu_regs.start, resource_size(&rmu_regs));
+ if (!rmu_regs_win) {
+ printk(KERN_ERR "Unable to map rmu register window\n");
rc = -ENOMEM;
- goto err_priv;
+ goto err_rmu;
}
- INIT_LIST_HEAD(&port->dbells);
- port->iores.start = law_start;
- port->iores.end = law_start + law_size - 1;
- port->iores.flags = IORESOURCE_MEM;
- port->iores.name = "rio_io_win";
-
- if (request_resource(&iomem_resource, &port->iores) < 0) {
- dev_err(&dev->dev, "RIO: Error requesting master port region"
- " 0x%016llx-0x%016llx\n",
- (u64)port->iores.start, (u64)port->iores.end);
- rc = -ENOMEM;
- goto err_res;
+ for_each_child_of_node(rmu_node, np) {
+ rmu_np[tmp] = np;
+ tmp++;
}
- priv->pwirq = irq_of_parse_and_map(dev->dev.of_node, 0);
- dev_info(&dev->dev, "pwirq: %d\n", priv->pwirq);
- strcpy(port->name, "RIO0 mport");
-
- priv->dev = &dev->dev;
-
- port->ops = ops;
- port->priv = priv;
- port->phys_efptr = 0x100;
-
- priv->regs_win = ioremap(regs.start, resource_size(®s));
- rio_regs_win = priv->regs_win;
-
- /* Probe the master port phy type */
- ccsr = in_be32(priv->regs_win + RIO_CCSR);
- port->phy_type = (ccsr & 1) ? RIO_PHY_SERIAL : RIO_PHY_PARALLEL;
- dev_info(&dev->dev, "RapidIO PHY type: %s\n",
- (port->phy_type == RIO_PHY_PARALLEL) ? "parallel" :
- ((port->phy_type == RIO_PHY_SERIAL) ? "serial" :
- "unknown"));
- /* Checking the port training status */
- if (in_be32((priv->regs_win + RIO_ESCSR)) & 1) {
- dev_err(&dev->dev, "Port is not ready. "
- "Try to restart connection...\n");
- switch (port->phy_type) {
- case RIO_PHY_SERIAL:
- /* Disable ports */
- out_be32(priv->regs_win + RIO_CCSR, 0);
- /* Set 1x lane */
- setbits32(priv->regs_win + RIO_CCSR, 0x02000000);
- /* Enable ports */
- setbits32(priv->regs_win + RIO_CCSR, 0x00600000);
- break;
- case RIO_PHY_PARALLEL:
- /* Disable ports */
- out_be32(priv->regs_win + RIO_CCSR, 0x22000000);
- /* Enable ports */
- out_be32(priv->regs_win + RIO_CCSR, 0x44000000);
- break;
+ for (i = 0; i < *ports_num; i++) {
+ port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
+ if (!port)
+ continue;
+
+ port->index = i;
+
+ priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL);
+ if (!priv) {
+ printk(KERN_ERR "Can't alloc memory for 'priv'\n");
+ kfree(port);
+ continue;
+ }
+
+ INIT_LIST_HEAD(&port->dbells);
+ port->iores.start = law_start + i *
+ (law_size >> (ilog2(*ports_num)));
+ port->iores.end = port->iores.start +
+ (law_size >> (ilog2(*ports_num)))
+ - 1;
+ port->iores.flags = IORESOURCE_MEM;
+ port->iores.name = "rio_io_win";
+
+ if (request_resource(&iomem_resource, &port->iores) < 0) {
+ dev_err(&dev->dev, "RIO: Error requesting master port region"
+ " 0x%016llx-0x%016llx\n",
+ (u64)port->iores.start, (u64)port->iores.end);
+ kfree(priv);
+ kfree(port);
+ continue;
}
- msleep(100);
- if (in_be32((priv->regs_win + RIO_ESCSR)) & 1) {
- dev_err(&dev->dev, "Port restart failed.\n");
- rc = -ENOLINK;
- goto err;
+ sprintf(port->name, "RIO mport %d", i);
+
+ priv->dev = &dev->dev;
+
+ port->ops = ops;
+ port->priv = priv;
+ port->phys_efptr = 0x100;
+
+ priv->regs_win = rio_regs_win;
+
+ /* Probe the master port phy type */
+ ccsr = in_be32(priv->regs_win + RIO_CCSR + i*0x20);
+ port->phy_type = (ccsr & 1) ? RIO_PHY_SERIAL : RIO_PHY_PARALLEL;
+ dev_info(&dev->dev, "RapidIO PHY type: %s\n",
+ (port->phy_type == RIO_PHY_PARALLEL) ?
+ "parallel" :
+ ((port->phy_type == RIO_PHY_SERIAL) ? "serial" :
+ "unknown"));
+ /* Checking the port training status */
+ if (in_be32((priv->regs_win + RIO_ESCSR + i*0x20)) & 1) {
+ dev_err(&dev->dev, "Port %d is not ready. "
+ "Try to restart connection...\n", i);
+ switch (port->phy_type) {
+ case RIO_PHY_SERIAL:
+ /* Disable ports */
+ out_be32(priv->regs_win
+ + RIO_CCSR + i*0x20, 0);
+ /* Set 1x lane */
+ setbits32(priv->regs_win
+ + RIO_CCSR + i*0x20, 0x02000000);
+ /* Enable ports */
+ setbits32(priv->regs_win
+ + RIO_CCSR + i*0x20, 0x00600000);
+ break;
+ case RIO_PHY_PARALLEL:
+ /* Disable ports */
+ out_be32(priv->regs_win
+ + RIO_CCSR + i*0x20, 0x22000000);
+ /* Enable ports */
+ out_be32(priv->regs_win
+ + RIO_CCSR + i*0x20, 0x44000000);
+ break;
+ }
+ msleep(100);
+ if (in_be32((priv->regs_win
+ + RIO_ESCSR + i*0x20)) & 1) {
+ dev_err(&dev->dev,
+ "Port %d restart failed.\n", i);
+ release_resource(&port->iores);
+ kfree(priv);
+ kfree(port);
+ continue;
+ }
+ dev_info(&dev->dev, "Port %d restart success!\n", i);
}
- dev_info(&dev->dev, "Port restart success!\n");
- }
- fsl_rio_info(&dev->dev, ccsr);
+ fsl_rio_info(&dev->dev, ccsr);
- port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR))
+ port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR))
& RIO_PEF_CTLS) >> 4;
- dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n",
- port->sys_size ? 65536 : 256);
+ dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n",
+ port->sys_size ? 65536 : 256);
+
+ if (rio_register_mport(port)) {
+ release_resource(&port->iores);
+ kfree(priv);
+ kfree(port);
+ continue;
+ }
+ if (port->host_deviceid >= 0)
+ out_be32(priv->regs_win + RIO_GCCSR, RIO_PORT_GEN_HOST |
+ RIO_PORT_GEN_MASTER | RIO_PORT_GEN_DISCOVERED);
+ else
+ out_be32(priv->regs_win + RIO_GCCSR,
+ RIO_PORT_GEN_MASTER);
- if (rio_register_mport(port))
- goto err;
+ priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win
+ + ((i == 0) ? RIO_ATMU_REGS_PORT1_OFFSET :
+ RIO_ATMU_REGS_PORT2_OFFSET));
- if (port->host_deviceid >= 0)
- out_be32(priv->regs_win + RIO_GCCSR, RIO_PORT_GEN_HOST |
- RIO_PORT_GEN_MASTER | RIO_PORT_GEN_DISCOVERED);
- else
- out_be32(priv->regs_win + RIO_GCCSR, 0x00000000);
+ priv->maint_atmu_regs = priv->atmu_regs + 1;
- priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win
- + RIO_ATMU_REGS_OFFSET);
- priv->maint_atmu_regs = priv->atmu_regs + 1;
+ /* Set to receive any dist ID for serial RapidIO controller. */
+ if (port->phy_type == RIO_PHY_SERIAL)
+ out_be32((priv->regs_win
+ + RIO_ISR_AACR + i*0x80), RIO_ISR_AACR_AA);
- /* Set to receive any dist ID for serial RapidIO controller. */
- if (port->phy_type == RIO_PHY_SERIAL)
- out_be32((priv->regs_win + RIO_ISR_AACR), RIO_ISR_AACR_AA);
+ /* Configure maintenance transaction window */
+ out_be32(&priv->maint_atmu_regs->rowbar,
+ port->iores.start >> 12);
+ out_be32(&priv->maint_atmu_regs->rowar,
+ 0x80077000 | (ilog2(RIO_MAINT_WIN_SIZE) - 1));
- /* Configure maintenance transaction window */
- out_be32(&priv->maint_atmu_regs->rowbar, law_start >> 12);
- out_be32(&priv->maint_atmu_regs->rowar,
- 0x80077000 | (ilog2(RIO_MAINT_WIN_SIZE) - 1));
+ priv->maint_win = ioremap(port->iores.start,
+ RIO_MAINT_WIN_SIZE);
- priv->maint_win = ioremap(law_start, RIO_MAINT_WIN_SIZE);
+ fsl_rio_setup_rmu(port, rmu_np[i]);
- fsl_rio_setup_rmu(port, dev->dev.of_node);
+ dbell->mport[i] = port;
- fsl_rio_port_write_init(port);
+ active_ports++;
+ }
+
+ if (!active_ports) {
+ rc = -ENOLINK;
+ goto err;
+ }
return 0;
err:
- iounmap(priv->regs_win);
- release_resource(&port->iores);
-err_res:
- kfree(priv);
-err_priv:
- kfree(port);
-err_port:
+ iounmap(rmu_regs_win);
+err_rmu:
+ kfree(pw);
+err_pw:
+ kfree(dbell);
+err_dbell:
kfree(ops);
err_ops:
+ iounmap(rio_regs_win);
+err_rio_regs:
return rc;
}
diff --git a/arch/powerpc/sysdev/fsl_rio.h b/arch/powerpc/sysdev/fsl_rio.h
index f888a1e..b9e7d1f 100644
--- a/arch/powerpc/sysdev/fsl_rio.h
+++ b/arch/powerpc/sysdev/fsl_rio.h
@@ -36,6 +36,24 @@
#define RIO_MAINT_WIN_SIZE 0x400000
#define RIO_LTLEDCSR 0x0608
+#define DOORBELL_ROWAR_EN 0x80000000
+#define DOORBELL_ROWAR_TFLOWLV 0x08000000 /* highest priority level */
+#define DOORBELL_ROWAR_PCI 0x02000000 /* PCI window */
+#define DOORBELL_ROWAR_NREAD 0x00040000 /* NREAD */
+#define DOORBELL_ROWAR_MAINTRD 0x00070000 /* maintenance read */
+#define DOORBELL_ROWAR_RES 0x00002000 /* wrtpy: reserverd */
+#define DOORBELL_ROWAR_MAINTWD 0x00007000
+#define DOORBELL_ROWAR_SIZE 0x0000000b /* window size is 4k */
+
+#define RIO_ATMU_REGS_PORT1_OFFSET 0x10c00
+#define RIO_ATMU_REGS_PORT2_OFFSET 0x10e00
+#define RIO_S_DBELL_REGS_OFFSET 0x13400
+#define RIO_S_PW_REGS_OFFSET 0x134e0
+#define RIO_ATMU_REGS_DBELL_OFFSET 0x10C40
+
+#define MAX_MSG_UNIT_NUM 2
+#define MAX_PORT_NUM 4
+
struct rio_atmu_regs {
u32 rowtar;
u32 rowtear;
@@ -45,6 +63,11 @@ struct rio_atmu_regs {
u32 pad3[3];
};
+struct rio_dbell_ring {
+ void *virt;
+ dma_addr_t phys;
+};
+
struct rio_port_write_msg {
void *virt;
dma_addr_t phys;
@@ -53,26 +76,62 @@ struct rio_port_write_msg {
u32 discard_count;
};
-struct rio_priv {
+struct fsl_rio_dbell {
+ struct rio_mport *mport[MAX_PORT_NUM];
struct device *dev;
- void __iomem *regs_win;
- struct rio_atmu_regs __iomem *atmu_regs;
- struct rio_atmu_regs __iomem *maint_atmu_regs;
- void __iomem *maint_win;
+ struct rio_dbell_regs __iomem *dbell_regs;
+ struct rio_atmu_regs __iomem *dbell_atmu_regs;
+ void __iomem *dbell_win;
+ struct rio_dbell_ring dbell_ring;
+ int bellirq;
+};
+
+struct fsl_rio_pw {
+ struct device *dev;
+ struct rio_pw_regs __iomem *pw_regs;
struct rio_port_write_msg port_write_msg;
int pwirq;
struct work_struct pw_work;
struct kfifo pw_fifo;
spinlock_t pw_fifo_lock;
+};
+
+struct rio_priv {
+ struct device *dev;
+ void __iomem *regs_win;
+ struct rio_atmu_regs __iomem *atmu_regs;
+ struct rio_atmu_regs __iomem *maint_atmu_regs;
+ void __iomem *maint_win;
void *rmm_handle; /* RapidIO message manager(unit) Handle */
};
extern void __iomem *rio_regs_win;
+extern void __iomem *rmu_regs_win;
+
+extern resource_size_t rio_law_start;
+
+extern struct fsl_rio_dbell *dbell;
+extern struct fsl_rio_pw *pw;
extern int fsl_rio_setup_rmu(struct rio_mport *mport,
struct device_node *node);
-extern int fsl_rio_port_write_init(struct rio_mport *mport);
+extern int fsl_rio_port_write_init(struct fsl_rio_pw *pw);
extern int fsl_rio_pw_enable(struct rio_mport *mport, int enable);
-extern void fsl_rio_port_error_handler(struct rio_mport *port, int offset);
+extern void fsl_rio_port_error_handler(int offset);
+extern int fsl_rio_doorbell_init(struct fsl_rio_dbell *dbell);
+
+extern int fsl_rio_doorbell_send(struct rio_mport *mport,
+ int index, u16 destid, u16 data);
+extern int fsl_add_outb_message(struct rio_mport *mport,
+ struct rio_dev *rdev,
+ int mbox, void *buffer, size_t len);
+extern int fsl_open_outb_mbox(struct rio_mport *mport,
+ void *dev_id, int mbox, int entries);
+extern void fsl_close_outb_mbox(struct rio_mport *mport, int mbox);
+extern int fsl_open_inb_mbox(struct rio_mport *mport,
+ void *dev_id, int mbox, int entries);
+extern void fsl_close_inb_mbox(struct rio_mport *mport, int mbox);
+extern int fsl_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf);
+extern void *fsl_get_inb_message(struct rio_mport *mport, int mbox);
#endif
diff --git a/arch/powerpc/sysdev/fsl_rmu.c b/arch/powerpc/sysdev/fsl_rmu.c
index 0a3e6cf..4686db3 100644
--- a/arch/powerpc/sysdev/fsl_rmu.c
+++ b/arch/powerpc/sysdev/fsl_rmu.c
@@ -36,8 +36,8 @@
(((struct rio_priv *)(mport->priv))->rmm_handle)
/* RapidIO definition irq, which read from OF-tree */
-#define IRQ_RIO_PW(m) (((struct rio_priv *)(m->priv))->pwirq)
-#define IRQ_RIO_BELL(m) (((struct fsl_rmu *)(GET_RMM_HANDLE(m)))->bellirq)
+#define IRQ_RIO_PW(m) (((struct fsl_rio_pw *)(m))->pwirq)
+#define IRQ_RIO_BELL(m) (((struct fsl_rio_dbell *)(m))->bellirq)
#define IRQ_RIO_TX(m) (((struct fsl_rmu *)(GET_RMM_HANDLE(m)))->txirq)
#define IRQ_RIO_RX(m) (((struct fsl_rmu *)(GET_RMM_HANDLE(m)))->rxirq)
@@ -113,61 +113,53 @@
#define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET))
struct rio_msg_regs {
- u32 omr; /* 0xD_3000 - Outbound message 0 mode register */
- u32 osr; /* 0xD_3004 - Outbound message 0 status register */
+ u32 omr;
+ u32 osr;
u32 pad1;
- u32 odqdpar; /* 0xD_300C - Outbound message 0 descriptor queue
- dequeue pointer address register */
+ u32 odqdpar;
u32 pad2;
- u32 osar; /* 0xD_3014 - Outbound message 0 source address
- register */
- u32 odpr; /* 0xD_3018 - Outbound message 0 destination port
- register */
- u32 odatr; /* 0xD_301C - Outbound message 0 destination attributes
- Register*/
- u32 odcr; /* 0xD_3020 - Outbound message 0 double-word count
- register */
+ u32 osar;
+ u32 odpr;
+ u32 odatr;
+ u32 odcr;
u32 pad3;
- u32 odqepar; /* 0xD_3028 - Outbound message 0 descriptor queue
- enqueue pointer address register */
+ u32 odqepar;
u32 pad4[13];
- u32 imr; /* 0xD_3060 - Inbound message 0 mode register */
- u32 isr; /* 0xD_3064 - Inbound message 0 status register */
+ u32 imr;
+ u32 isr;
u32 pad5;
- u32 ifqdpar; /* 0xD_306C - Inbound message 0 frame queue dequeue
- pointer address register*/
+ u32 ifqdpar;
u32 pad6;
- u32 ifqepar; /* 0xD_3074 - Inbound message 0 frame queue enqueue
- pointer address register */
- u32 pad7[226];
- u32 odmr; /* 0xD_3400 - Outbound doorbell mode register */
- u32 odsr; /* 0xD_3404 - Outbound doorbell status register */
+ u32 ifqepar;
+ u32 pad7;
+};
+
+struct rio_dbell_regs {
+ u32 odmr;
+ u32 odsr;
u32 res0[4];
- u32 oddpr; /* 0xD_3418 - Outbound doorbell destination port
- register */
- u32 oddatr; /* 0xD_341c - Outbound doorbell destination attributes
- register */
+ u32 oddpr;
+ u32 oddatr;
u32 res1[3];
- u32 odretcr; /* 0xD_342C - Outbound doorbell retry error threshold
- configuration register */
+ u32 odretcr;
u32 res2[12];
- u32 dmr; /* 0xD_3460 - Inbound doorbell mode register */
- u32 dsr; /* 0xD_3464 - Inbound doorbell status register */
+ u32 dmr;
+ u32 dsr;
u32 pad8;
- u32 dqdpar; /* 0xD_346C - Inbound doorbell queue dequeue Pointer
- address register */
+ u32 dqdpar;
u32 pad9;
- u32 dqepar; /* 0xD_3474 - Inbound doorbell Queue enqueue pointer
- address register */
+ u32 dqepar;
u32 pad10[26];
- u32 pwmr; /* 0xD_34E0 - Inbound port-write mode register */
- u32 pwsr; /* 0xD_34E4 - Inbound port-write status register */
- u32 epwqbar; /* 0xD_34E8 - Extended Port-Write Queue Base Address
- register */
- u32 pwqbar; /* 0xD_34EC - Inbound port-write queue base address
- register */
};
+struct rio_pw_regs {
+ u32 pwmr;
+ u32 pwsr;
+ u32 epwqbar;
+ u32 pwqbar;
+};
+
+
struct rio_tx_desc {
u32 res1;
u32 saddr;
@@ -179,11 +171,6 @@ struct rio_tx_desc {
u32 res4;
};
-struct rio_dbell_ring {
- void *virt;
- dma_addr_t phys;
-};
-
struct rio_msg_tx_ring {
void *virt;
dma_addr_t phys;
@@ -204,13 +191,9 @@ struct rio_msg_rx_ring {
};
struct fsl_rmu {
- struct rio_atmu_regs __iomem *dbell_atmu_regs;
- void __iomem *dbell_win;
struct rio_msg_regs __iomem *msg_regs;
- struct rio_dbell_ring dbell_ring;
struct rio_msg_tx_ring msg_tx_ring;
struct rio_msg_rx_ring msg_rx_ring;
- int bellirq;
int txirq;
int rxirq;
};
@@ -247,9 +230,11 @@ fsl_rio_tx_handler(int irq, void *dev_instance)
if (osr & RIO_MSG_OSR_EOMI) {
u32 dqp = in_be32(&rmu->msg_regs->odqdpar);
int slot = (dqp - rmu->msg_tx_ring.phys) >> 5;
- port->outb_msg[0].mcback(port, rmu->msg_tx_ring.dev_id, -1,
- slot);
-
+ if (port->outb_msg[0].mcback != NULL) {
+ port->outb_msg[0].mcback(port, rmu->msg_tx_ring.dev_id,
+ -1,
+ slot);
+ }
/* Ack the end-of-message interrupt */
out_be32(&rmu->msg_regs->osr, RIO_MSG_OSR_EOMI);
}
@@ -284,12 +269,14 @@ fsl_rio_rx_handler(int irq, void *dev_instance)
/* XXX Need to check/dispatch until queue empty */
if (isr & RIO_MSG_ISR_DIQI) {
/*
- * We implement *only* mailbox 0, but can receive messages
- * for any mailbox/letter to that mailbox destination. So,
- * make the callback with an unknown/invalid mailbox number
- * argument.
- */
- port->inb_msg[0].mcback(port, rmu->msg_rx_ring.dev_id, -1, -1);
+ * Can receive messages for any mailbox/letter to that
+ * mailbox destination. So, make the callback with an
+ * unknown/invalid mailbox number argument.
+ */
+ if (port->inb_msg[0].mcback != NULL)
+ port->inb_msg[0].mcback(port, rmu->msg_rx_ring.dev_id,
+ -1,
+ -1);
/* Ack the queueing interrupt */
out_be32(&rmu->msg_regs->isr, RIO_MSG_ISR_DIQI);
@@ -311,27 +298,27 @@ static irqreturn_t
fsl_rio_dbell_handler(int irq, void *dev_instance)
{
int dsr;
- struct rio_mport *port = (struct rio_mport *)dev_instance;
- struct fsl_rmu *rmu = GET_RMM_HANDLE(port);
+ struct fsl_rio_dbell *fsl_dbell = (struct fsl_rio_dbell *)dev_instance;
+ int i;
- dsr = in_be32(&rmu->msg_regs->dsr);
+ dsr = in_be32(&fsl_dbell->dbell_regs->dsr);
if (dsr & DOORBELL_DSR_TE) {
pr_info("RIO: doorbell reception error\n");
- out_be32(&rmu->msg_regs->dsr, DOORBELL_DSR_TE);
+ out_be32(&fsl_dbell->dbell_regs->dsr, DOORBELL_DSR_TE);
goto out;
}
if (dsr & DOORBELL_DSR_QFI) {
pr_info("RIO: doorbell queue full\n");
- out_be32(&rmu->msg_regs->dsr, DOORBELL_DSR_QFI);
+ out_be32(&fsl_dbell->dbell_regs->dsr, DOORBELL_DSR_QFI);
}
/* XXX Need to check/dispatch until queue empty */
if (dsr & DOORBELL_DSR_DIQI) {
u32 dmsg =
- (u32) rmu->dbell_ring.virt +
- (in_be32(&rmu->msg_regs->dqdpar) & 0xfff);
+ (u32) fsl_dbell->dbell_ring.virt +
+ (in_be32(&fsl_dbell->dbell_regs->dqdpar) & 0xfff);
struct rio_dbell *dbell;
int found = 0;
@@ -340,35 +327,45 @@ fsl_rio_dbell_handler(int irq, void *dev_instance)
" sid %2.2x tid %2.2x info %4.4x\n",
DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
- list_for_each_entry(dbell, &port->dbells, node) {
- if ((dbell->res->start <= DBELL_INF(dmsg)) &&
- (dbell->res->end >= DBELL_INF(dmsg))) {
- found = 1;
- break;
+ for (i = 0; i < MAX_PORT_NUM; i++) {
+ if (fsl_dbell->mport[i]) {
+ list_for_each_entry(dbell,
+ &fsl_dbell->mport[i]->dbells, node) {
+ if ((dbell->res->start
+ <= DBELL_INF(dmsg))
+ && (dbell->res->end
+ >= DBELL_INF(dmsg))) {
+ found = 1;
+ break;
+ }
+ }
+ if (found && dbell->dinb) {
+ dbell->dinb(fsl_dbell->mport[i],
+ dbell->dev_id, DBELL_SID(dmsg),
+ DBELL_TID(dmsg),
+ DBELL_INF(dmsg));
+ break;
+ }
}
}
- if (found) {
- dbell->dinb(port, dbell->dev_id,
- DBELL_SID(dmsg),
- DBELL_TID(dmsg), DBELL_INF(dmsg));
- } else {
+
+ if (!found) {
pr_debug
("RIO: spurious doorbell,"
" sid %2.2x tid %2.2x info %4.4x\n",
DBELL_SID(dmsg), DBELL_TID(dmsg),
DBELL_INF(dmsg));
}
- setbits32(&rmu->msg_regs->dmr, DOORBELL_DMR_DI);
- out_be32(&rmu->msg_regs->dsr, DOORBELL_DSR_DIQI);
+ setbits32(&fsl_dbell->dbell_regs->dmr, DOORBELL_DMR_DI);
+ out_be32(&fsl_dbell->dbell_regs->dsr, DOORBELL_DSR_DIQI);
}
out:
return IRQ_HANDLED;
}
-void msg_unit_error_handler(struct rio_mport *port)
+void msg_unit_error_handler(void)
{
- struct fsl_rmu *rmu = GET_RMM_HANDLE(port);
/*XXX: Error recovery is not implemented, we just clear errors */
out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
@@ -378,10 +375,10 @@ void msg_unit_error_handler(struct rio_mport *port)
out_be32((u32 *)(rio_regs_win + RIO_OM0SR), OMSR_CLEAR);
out_be32((u32 *)(rio_regs_win + RIO_OM1SR), OMSR_CLEAR);
- out_be32(&rmu->msg_regs->odsr, ODSR_CLEAR);
- out_be32(&rmu->msg_regs->dsr, IDSR_CLEAR);
+ out_be32(&dbell->dbell_regs->odsr, ODSR_CLEAR);
+ out_be32(&dbell->dbell_regs->dsr, IDSR_CLEAR);
- out_be32(&rmu->msg_regs->pwsr, IPWSR_CLEAR);
+ out_be32(&pw->pw_regs->pwsr, IPWSR_CLEAR);
}
/**
@@ -396,18 +393,15 @@ static irqreturn_t
fsl_rio_port_write_handler(int irq, void *dev_instance)
{
u32 ipwmr, ipwsr;
- struct rio_mport *port = (struct rio_mport *)dev_instance;
- struct rio_priv *priv = port->priv;
- struct fsl_rmu *rmu;
+ struct fsl_rio_pw *pw = (struct fsl_rio_pw *)dev_instance;
u32 epwisr, tmp;
- rmu = GET_RMM_HANDLE(port);
- epwisr = in_be32(priv->regs_win + RIO_EPWISR);
+ epwisr = in_be32(rio_regs_win + RIO_EPWISR);
if (!(epwisr & RIO_EPWISR_PW))
goto pw_done;
- ipwmr = in_be32(&rmu->msg_regs->pwmr);
- ipwsr = in_be32(&rmu->msg_regs->pwsr);
+ ipwmr = in_be32(&pw->pw_regs->pwmr);
+ ipwsr = in_be32(&pw->pw_regs->pwsr);
#ifdef DEBUG_PW
pr_debug("PW Int->IPWMR: 0x%08x IPWSR: 0x%08x (", ipwmr, ipwsr);
@@ -428,60 +422,60 @@ fsl_rio_port_write_handler(int irq, void *dev_instance)
/* Save PW message (if there is room in FIFO),
* otherwise discard it.
*/
- if (kfifo_avail(&priv->pw_fifo) >= RIO_PW_MSG_SIZE) {
- priv->port_write_msg.msg_count++;
- kfifo_in(&priv->pw_fifo, priv->port_write_msg.virt,
+ if (kfifo_avail(&pw->pw_fifo) >= RIO_PW_MSG_SIZE) {
+ pw->port_write_msg.msg_count++;
+ kfifo_in(&pw->pw_fifo, pw->port_write_msg.virt,
RIO_PW_MSG_SIZE);
} else {
- priv->port_write_msg.discard_count++;
+ pw->port_write_msg.discard_count++;
pr_debug("RIO: ISR Discarded Port-Write Msg(s) (%d)\n",
- priv->port_write_msg.discard_count);
+ pw->port_write_msg.discard_count);
}
/* Clear interrupt and issue Clear Queue command. This allows
* another port-write to be received.
*/
- out_be32(&rmu->msg_regs->pwsr, RIO_IPWSR_QFI);
- out_be32(&rmu->msg_regs->pwmr, ipwmr | RIO_IPWMR_CQ);
+ out_be32(&pw->pw_regs->pwsr, RIO_IPWSR_QFI);
+ out_be32(&pw->pw_regs->pwmr, ipwmr | RIO_IPWMR_CQ);
- schedule_work(&priv->pw_work);
+ schedule_work(&pw->pw_work);
}
if ((ipwmr & RIO_IPWMR_EIE) && (ipwsr & RIO_IPWSR_TE)) {
- priv->port_write_msg.err_count++;
+ pw->port_write_msg.err_count++;
pr_debug("RIO: Port-Write Transaction Err (%d)\n",
- priv->port_write_msg.err_count);
+ pw->port_write_msg.err_count);
/* Clear Transaction Error: port-write controller should be
* disabled when clearing this error
*/
- out_be32(&rmu->msg_regs->pwmr, ipwmr & ~RIO_IPWMR_PWE);
- out_be32(&rmu->msg_regs->pwsr, RIO_IPWSR_TE);
- out_be32(&rmu->msg_regs->pwmr, ipwmr);
+ out_be32(&pw->pw_regs->pwmr, ipwmr & ~RIO_IPWMR_PWE);
+ out_be32(&pw->pw_regs->pwsr, RIO_IPWSR_TE);
+ out_be32(&pw->pw_regs->pwmr, ipwmr);
}
if (ipwsr & RIO_IPWSR_PWD) {
- priv->port_write_msg.discard_count++;
+ pw->port_write_msg.discard_count++;
pr_debug("RIO: Port Discarded Port-Write Msg(s) (%d)\n",
- priv->port_write_msg.discard_count);
- out_be32(&rmu->msg_regs->pwsr, RIO_IPWSR_PWD);
+ pw->port_write_msg.discard_count);
+ out_be32(&pw->pw_regs->pwsr, RIO_IPWSR_PWD);
}
pw_done:
if (epwisr & RIO_EPWISR_PINT1) {
- tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
+ tmp = in_be32(rio_regs_win + RIO_LTLEDCSR);
pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
- fsl_rio_port_error_handler(port, 0);
+ fsl_rio_port_error_handler(0);
}
if (epwisr & RIO_EPWISR_PINT2) {
- tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
+ tmp = in_be32(rio_regs_win + RIO_LTLEDCSR);
pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
- fsl_rio_port_error_handler(port, 1);
+ fsl_rio_port_error_handler(1);
}
if (epwisr & RIO_EPWISR_MU) {
- tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
+ tmp = in_be32(rio_regs_win + RIO_LTLEDCSR);
pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
- msg_unit_error_handler(port);
+ msg_unit_error_handler();
}
return IRQ_HANDLED;
@@ -489,18 +483,18 @@ pw_done:
static void fsl_pw_dpc(struct work_struct *work)
{
- struct rio_priv *priv = container_of(work, struct rio_priv, pw_work);
+ struct fsl_rio_pw *pw = container_of(work, struct fsl_rio_pw, pw_work);
unsigned long flags;
u32 msg_buffer[RIO_PW_MSG_SIZE/sizeof(u32)];
/*
* Process port-write messages
*/
- spin_lock_irqsave(&priv->pw_fifo_lock, flags);
- while (kfifo_out(&priv->pw_fifo, (unsigned char *)msg_buffer,
+ spin_lock_irqsave(&pw->pw_fifo_lock, flags);
+ while (kfifo_out(&pw->pw_fifo, (unsigned char *)msg_buffer,
RIO_PW_MSG_SIZE)) {
/* Process one message */
- spin_unlock_irqrestore(&priv->pw_fifo_lock, flags);
+ spin_unlock_irqrestore(&pw->pw_fifo_lock, flags);
#ifdef DEBUG_PW
{
u32 i;
@@ -517,31 +511,28 @@ static void fsl_pw_dpc(struct work_struct *work)
#endif
/* Pass the port-write message to RIO core for processing */
rio_inb_pwrite_handler((union rio_pw_msg *)msg_buffer);
- spin_lock_irqsave(&priv->pw_fifo_lock, flags);
+ spin_lock_irqsave(&pw->pw_fifo_lock, flags);
}
- spin_unlock_irqrestore(&priv->pw_fifo_lock, flags);
+ spin_unlock_irqrestore(&pw->pw_fifo_lock, flags);
}
/**
* fsl_rio_pw_enable - enable/disable port-write interface init
* @mport: Master port implementing the port write unit
- * @enable: 1=enable; 0=disable port-write message handling
+ * @enable: 1=enable; 0=disable port-write message handling
*/
int fsl_rio_pw_enable(struct rio_mport *mport, int enable)
{
- struct fsl_rmu *rmu;
u32 rval;
- rmu = GET_RMM_HANDLE(mport);
-
- rval = in_be32(&rmu->msg_regs->pwmr);
+ rval = in_be32(&pw->pw_regs->pwmr);
if (enable)
rval |= RIO_IPWMR_PWE;
else
rval &= ~RIO_IPWMR_PWE;
- out_be32(&rmu->msg_regs->pwmr, rval);
+ out_be32(&pw->pw_regs->pwmr, rval);
return 0;
}
@@ -555,51 +546,47 @@ int fsl_rio_pw_enable(struct rio_mport *mport, int enable)
* or %-ENOMEM on failure.
*/
-int fsl_rio_port_write_init(struct rio_mport *mport)
+int fsl_rio_port_write_init(struct fsl_rio_pw *pw)
{
- struct rio_priv *priv = mport->priv;
- struct fsl_rmu *rmu;
int rc = 0;
- rmu = GET_RMM_HANDLE(mport);
-
/* Following configurations require a disabled port write controller */
- out_be32(&rmu->msg_regs->pwmr,
- in_be32(&rmu->msg_regs->pwmr) & ~RIO_IPWMR_PWE);
+ out_be32(&pw->pw_regs->pwmr,
+ in_be32(&pw->pw_regs->pwmr) & ~RIO_IPWMR_PWE);
/* Initialize port write */
- priv->port_write_msg.virt = dma_alloc_coherent(priv->dev,
+ pw->port_write_msg.virt = dma_alloc_coherent(pw->dev,
RIO_PW_MSG_SIZE,
- &priv->port_write_msg.phys, GFP_KERNEL);
- if (!priv->port_write_msg.virt) {
+ &pw->port_write_msg.phys, GFP_KERNEL);
+ if (!pw->port_write_msg.virt) {
pr_err("RIO: unable allocate port write queue\n");
return -ENOMEM;
}
- priv->port_write_msg.err_count = 0;
- priv->port_write_msg.discard_count = 0;
+ pw->port_write_msg.err_count = 0;
+ pw->port_write_msg.discard_count = 0;
/* Point dequeue/enqueue pointers at first entry */
- out_be32(&rmu->msg_regs->epwqbar, 0);
- out_be32(&rmu->msg_regs->pwqbar, (u32) priv->port_write_msg.phys);
+ out_be32(&pw->pw_regs->epwqbar, 0);
+ out_be32(&pw->pw_regs->pwqbar, (u32) pw->port_write_msg.phys);
pr_debug("EIPWQBAR: 0x%08x IPWQBAR: 0x%08x\n",
- in_be32(&rmu->msg_regs->epwqbar),
- in_be32(&rmu->msg_regs->pwqbar));
+ in_be32(&pw->pw_regs->epwqbar),
+ in_be32(&pw->pw_regs->pwqbar));
/* Clear interrupt status IPWSR */
- out_be32(&rmu->msg_regs->pwsr,
+ out_be32(&pw->pw_regs->pwsr,
(RIO_IPWSR_TE | RIO_IPWSR_QFI | RIO_IPWSR_PWD));
/* Configure port write contoller for snooping enable all reporting,
clear queue full */
- out_be32(&rmu->msg_regs->pwmr,
+ out_be32(&pw->pw_regs->pwmr,
RIO_IPWMR_SEN | RIO_IPWMR_QFIE | RIO_IPWMR_EIE | RIO_IPWMR_CQ);
/* Hook up port-write handler */
- rc = request_irq(IRQ_RIO_PW(mport), fsl_rio_port_write_handler,
- IRQF_SHARED, "port-write", (void *)mport);
+ rc = request_irq(IRQ_RIO_PW(pw), fsl_rio_port_write_handler,
+ IRQF_SHARED, "port-write", (void *)pw);
if (rc < 0) {
pr_err("MPC85xx RIO: unable to request inbound doorbell irq");
goto err_out;
@@ -607,26 +594,26 @@ int fsl_rio_port_write_init(struct rio_mport *mport)
/* Enable Error Interrupt */
out_be32((u32 *)(rio_regs_win + RIO_LTLEECSR), LTLEECSR_ENABLE_ALL);
- INIT_WORK(&priv->pw_work, fsl_pw_dpc);
- spin_lock_init(&priv->pw_fifo_lock);
- if (kfifo_alloc(&priv->pw_fifo, RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) {
+ INIT_WORK(&pw->pw_work, fsl_pw_dpc);
+ spin_lock_init(&pw->pw_fifo_lock);
+ if (kfifo_alloc(&pw->pw_fifo, RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) {
pr_err("FIFO allocation failed\n");
rc = -ENOMEM;
goto err_out_irq;
}
pr_debug("IPWMR: 0x%08x IPWSR: 0x%08x\n",
- in_be32(&rmu->msg_regs->pwmr),
- in_be32(&rmu->msg_regs->pwsr));
+ in_be32(&pw->pw_regs->pwmr),
+ in_be32(&pw->pw_regs->pwsr));
return rc;
err_out_irq:
- free_irq(IRQ_RIO_PW(mport), (void *)mport);
+ free_irq(IRQ_RIO_PW(pw), (void *)pw);
err_out:
- dma_free_coherent(priv->dev, RIO_PW_MSG_SIZE,
- priv->port_write_msg.virt,
- priv->port_write_msg.phys);
+ dma_free_coherent(pw->dev, RIO_PW_MSG_SIZE,
+ pw->port_write_msg.virt,
+ pw->port_write_msg.phys);
return rc;
}
@@ -640,27 +627,25 @@ err_out:
* Sends a MPC85xx doorbell message. Returns %0 on success or
* %-EINVAL on failure.
*/
-static int fsl_rio_doorbell_send(struct rio_mport *mport,
+int fsl_rio_doorbell_send(struct rio_mport *mport,
int index, u16 destid, u16 data)
{
- struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
-
pr_debug("fsl_doorbell_send: index %d destid %4.4x data %4.4x\n",
index, destid, data);
switch (mport->phy_type) {
case RIO_PHY_PARALLEL:
- out_be32(&rmu->dbell_atmu_regs->rowtar, destid << 22);
- out_be16(rmu->dbell_win, data);
+ out_be32(&dbell->dbell_atmu_regs->rowtar, destid << 22);
+ out_be16(dbell->dbell_win, data);
break;
case RIO_PHY_SERIAL:
/* In the serial version silicons, such as MPC8548, MPC8641,
* below operations is must be.
*/
- out_be32(&rmu->msg_regs->odmr, 0x00000000);
- out_be32(&rmu->msg_regs->odretcr, 0x00000004);
- out_be32(&rmu->msg_regs->oddpr, destid << 16);
- out_be32(&rmu->msg_regs->oddatr, data);
- out_be32(&rmu->msg_regs->odmr, 0x00000001);
+ out_be32(&dbell->dbell_regs->odmr, 0x00000000);
+ out_be32(&dbell->dbell_regs->odretcr, 0x00000004);
+ out_be32(&dbell->dbell_regs->oddpr, destid << 16);
+ out_be32(&dbell->dbell_regs->oddatr, (index << 20) | data);
+ out_be32(&dbell->dbell_regs->odmr, 0x00000001);
break;
}
@@ -678,7 +663,7 @@ static int fsl_rio_doorbell_send(struct rio_mport *mport,
* Adds the @buffer message to the MPC85xx outbound message queue. Returns
* %0 on success or %-EINVAL on failure.
*/
-static int
+int
fsl_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
void *buffer, size_t len)
{
@@ -690,7 +675,6 @@ fsl_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
pr_debug("RIO: fsl_add_outb_message(): destid %4.4x mbox %d buffer " \
"%8.8x len %8.8x\n", rdev->destid, mbox, (int)buffer, len);
-
if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) {
ret = -EINVAL;
goto out;
@@ -716,7 +700,7 @@ fsl_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
desc->dport = (rdev->destid << 16) | (mbox & 0x3);
/* Enable EOMI interrupt and priority */
- desc->dattr = 0x28000000;
+ desc->dattr = 0x28000000 | ((mport->index) << 20);
break;
}
@@ -750,7 +734,7 @@ out:
* and enables the outbound message unit. Returns %0 on success and
* %-EINVAL or %-ENOMEM on failure.
*/
-static int
+int
fsl_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
{
int i, j, rc = 0;
@@ -855,7 +839,7 @@ out_dma:
* Disables the outbound message unit, free all buffers, and
* frees the outbound message interrupt.
*/
-static void fsl_close_outb_mbox(struct rio_mport *mport, int mbox)
+void fsl_close_outb_mbox(struct rio_mport *mport, int mbox)
{
struct rio_priv *priv = mport->priv;
struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
@@ -883,7 +867,7 @@ static void fsl_close_outb_mbox(struct rio_mport *mport, int mbox)
* and enables the inbound message unit. Returns %0 on success
* and %-EINVAL or %-ENOMEM on failure.
*/
-static int
+int
fsl_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
{
int i, rc = 0;
@@ -956,7 +940,7 @@ out:
* Disables the inbound message unit, free all buffers, and
* frees the inbound message interrupt.
*/
-static void fsl_close_inb_mbox(struct rio_mport *mport, int mbox)
+void fsl_close_inb_mbox(struct rio_mport *mport, int mbox)
{
struct rio_priv *priv = mport->priv;
struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
@@ -966,7 +950,7 @@ static void fsl_close_inb_mbox(struct rio_mport *mport, int mbox)
/* Free ring */
dma_free_coherent(priv->dev, rmu->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
- rmu->msg_rx_ring.virt, rmu->msg_rx_ring.phys);
+ rmu->msg_rx_ring.virt, rmu->msg_rx_ring.phys);
/* Free interrupt */
free_irq(IRQ_RIO_RX(mport), (void *)mport);
@@ -981,7 +965,7 @@ static void fsl_close_inb_mbox(struct rio_mport *mport, int mbox)
* Adds the @buf buffer to the MPC85xx inbound message queue. Returns
* %0 on success or %-EINVAL on failure.
*/
-static int fsl_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
+int fsl_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
{
int rc = 0;
struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
@@ -1013,7 +997,7 @@ out:
* Gets the next available inbound message from the inbound message queue.
* A pointer to the message is returned on success or NULL on failure.
*/
-static void *fsl_get_inb_message(struct rio_mport *mport, int mbox)
+void *fsl_get_inb_message(struct rio_mport *mport, int mbox)
{
struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
u32 phys_buf, virt_buf;
@@ -1058,16 +1042,14 @@ out2:
* ring. Called from fsl_rio_setup(). Returns %0 on success
* or %-ENOMEM on failure.
*/
-static int fsl_rio_doorbell_init(struct rio_mport *mport)
+int fsl_rio_doorbell_init(struct fsl_rio_dbell *dbell)
{
- struct rio_priv *priv = mport->priv;
- struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
int rc = 0;
/* Map outbound doorbell window immediately after maintenance window */
- rmu->dbell_win = ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE,
+ dbell->dbell_win = ioremap(rio_law_start + RIO_MAINT_WIN_SIZE,
RIO_DBELL_WIN_SIZE);
- if (!rmu->dbell_win) {
+ if (!dbell->dbell_win) {
printk(KERN_ERR
"RIO: unable to map outbound doorbell window\n");
rc = -ENOMEM;
@@ -1075,36 +1057,36 @@ static int fsl_rio_doorbell_init(struct rio_mport *mport)
}
/* Initialize inbound doorbells */
- rmu->dbell_ring.virt = dma_alloc_coherent(priv->dev, 512 *
- DOORBELL_MESSAGE_SIZE, &rmu->dbell_ring.phys, GFP_KERNEL);
- if (!rmu->dbell_ring.virt) {
+ dbell->dbell_ring.virt = dma_alloc_coherent(dbell->dev, 512 *
+ DOORBELL_MESSAGE_SIZE, &dbell->dbell_ring.phys, GFP_KERNEL);
+ if (!dbell->dbell_ring.virt) {
printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
rc = -ENOMEM;
- iounmap(rmu->dbell_win);
+ iounmap(dbell->dbell_win);
goto out;
}
/* Point dequeue/enqueue pointers at first entry in ring */
- out_be32(&rmu->msg_regs->dqdpar, (u32) rmu->dbell_ring.phys);
- out_be32(&rmu->msg_regs->dqepar, (u32) rmu->dbell_ring.phys);
+ out_be32(&dbell->dbell_regs->dqdpar, (u32) dbell->dbell_ring.phys);
+ out_be32(&dbell->dbell_regs->dqepar, (u32) dbell->dbell_ring.phys);
/* Clear interrupt status */
- out_be32(&rmu->msg_regs->dsr, 0x00000091);
+ out_be32(&dbell->dbell_regs->dsr, 0x00000091);
/* Hook up doorbell handler */
- rc = request_irq(IRQ_RIO_BELL(mport), fsl_rio_dbell_handler, 0,
- "dbell_rx", (void *)mport);
+ rc = request_irq(IRQ_RIO_BELL(dbell), fsl_rio_dbell_handler, 0,
+ "dbell_rx", (void *)dbell);
if (rc < 0) {
- iounmap(rmu->dbell_win);
- dma_free_coherent(priv->dev, 512 * DOORBELL_MESSAGE_SIZE,
- rmu->dbell_ring.virt, rmu->dbell_ring.phys);
+ iounmap(dbell->dbell_win);
+ dma_free_coherent(dbell->dev, 512 * DOORBELL_MESSAGE_SIZE,
+ dbell->dbell_ring.virt, dbell->dbell_ring.phys);
printk(KERN_ERR
"MPC85xx RIO: unable to request inbound doorbell irq");
goto out;
}
/* Configure doorbells for snooping, 512 entries, and enable */
- out_be32(&rmu->msg_regs->dmr, 0x00108161);
+ out_be32(&dbell->dbell_regs->dmr, 0x00108161);
out:
return rc;
@@ -1114,50 +1096,50 @@ int fsl_rio_setup_rmu(struct rio_mport *mport, struct device_node *node)
{
struct rio_priv *priv;
struct fsl_rmu *rmu;
- struct rio_ops *ops;
+ u64 msg_start, msg_size;
+ const u32 *msg_addr;
+ int mlen;
+ int aw, sw;
- if (!mport || !mport->priv || !node)
- return -1;
+ if (!mport || !mport->priv)
+ return -EFAULT;
+
+ priv = mport->priv;
+
+ if (!node) {
+ dev_warn(priv->dev, "Can't get %s property 'fsl,rmu'\n",
+ priv->dev->of_node->full_name);
+ return -EFAULT;
+ }
rmu = kzalloc(sizeof(struct fsl_rmu), GFP_KERNEL);
if (!rmu)
return -ENOMEM;
- priv = mport->priv;
+ aw = of_n_addr_cells(node);
+ sw = of_n_size_cells(node);
+ msg_addr = of_get_property(node, "reg", &mlen);
+ msg_start = of_read_number(msg_addr, aw);
+ msg_size = of_read_number(msg_addr + aw, sw);
+ if (!msg_addr) {
+ pr_err("%s: unable to find 'reg' property of message-unit\n",
+ node->full_name);
+ return -ENOMEM;
+ }
+
+ rmu->msg_regs = (struct rio_msg_regs *)
+ (rmu_regs_win + (u32)msg_start);
+
+ rmu->txirq = irq_of_parse_and_map(node, 0);
+ rmu->rxirq = irq_of_parse_and_map(node, 1);
+ printk(KERN_INFO "%s: txirq: %d, rxirq %d\n",
+ node->full_name, rmu->txirq, rmu->rxirq);
+
priv->rmm_handle = rmu;
- rmu->dbell_atmu_regs = priv->atmu_regs + 2;
- rmu->msg_regs = (struct rio_msg_regs *)(priv->regs_win +
- ((mport->phy_type == RIO_PHY_SERIAL) ?
- RIO_S_MSG_REGS_OFFSET : RIO_P_MSG_REGS_OFFSET));
-
- rmu->bellirq = irq_of_parse_and_map(node, 2);
- rmu->txirq = irq_of_parse_and_map(node, 3);
- rmu->rxirq = irq_of_parse_and_map(node, 4);
- dev_info(priv->dev, "bellirq: %d, txirq: %d, rxirq %d\n",
- rmu->bellirq, rmu->txirq, rmu->rxirq);
-
- ops = mport->ops;
-
- ops->dsend = fsl_rio_doorbell_send;
- ops->open_outb_mbox = fsl_open_outb_mbox;
- ops->open_inb_mbox = fsl_open_inb_mbox;
- ops->close_outb_mbox = fsl_close_outb_mbox;
- ops->close_inb_mbox = fsl_close_inb_mbox;
- ops->add_outb_message = fsl_add_outb_message;
- ops->add_inb_buffer = fsl_add_inb_buffer;
- ops->get_inb_message = fsl_get_inb_message;
rio_init_dbell_res(&mport->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
rio_init_mbox_res(&mport->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
rio_init_mbox_res(&mport->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
- /* Configure outbound doorbell window */
- out_be32(&rmu->dbell_atmu_regs->rowbar,
- (mport->iores.start + RIO_MAINT_WIN_SIZE) >> 12);
- /* 4k window size */
- out_be32(&rmu->dbell_atmu_regs->rowar, 0x8004200b);
-
- fsl_rio_doorbell_init(mport);
-
return 0;
}
--
1.7.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists