[<prev] [next>] [day] [month] [year] [list]
Message-Id: <1321469772-801-1-git-send-email-weber@corscience.de>
Date: Wed, 16 Nov 2011 19:56:12 +0100
From: Thomas Weber <weber@...science.de>
To: tony@...mide.com
Cc: Thomas Weber <weber@...science.de>,
Russell King <linux@....linux.org.uk> (maintainer:ARM PORT),
linux-omap@...r.kernel.org (open list:OMAP SUPPORT),
linux-arm-kernel@...ts.infradead.org (open list:ARM PORT),
linux-kernel@...r.kernel.org (open list),
uwe.kleine-koenig@...gutronix.de
Subject: [PATCHv2] ARM: OMAP: hsmmc: Fix mux for non-OMAP pins
The Devkit8000 uses a TWL4030 pin for card detection.
Thats why the error:
_omap_mux_init_gpio: Could not set gpio192
occurs.
This patch checks that the pin is on OMAP before
calling omap_mux_init_gpio.
Signed-off-by: Thomas Weber <weber@...science.de>
---
Changelog:
v2: Remove backslash at end of line
arch/arm/mach-omap2/hsmmc.c | 6 ++++--
1 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index f4a1020..c3aea79 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -200,10 +200,12 @@ static int nop_mmc_set_power(struct device *dev, int slot, int power_on,
static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
int controller_nr)
{
- if (gpio_is_valid(mmc_controller->slots[0].switch_pin))
+ if (gpio_is_valid(mmc_controller->slots[0].switch_pin) &&
+ (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
OMAP_PIN_INPUT_PULLUP);
- if (gpio_is_valid(mmc_controller->slots[0].gpio_wp))
+ if (gpio_is_valid(mmc_controller->slots[0].gpio_wp) &&
+ (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
OMAP_PIN_INPUT_PULLUP);
if (cpu_is_omap34xx()) {
--
1.7.7.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists