| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1324328078-7310-1-git-send-email-robherring2@gmail.com>
Date: Mon, 19 Dec 2011 14:54:38 -0600
From: Rob Herring <robherring2@...il.com>
To: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
devicetree-discuss@...ts.ozlabs.org
Cc: Grant Likely <grant.likely@...retlab.ca>,
Rob Herring <rob.herring@...xeda.com>,
Linus Walleij <linus.ml.walleij@...il.com>
Subject: [PATCH v2] gpio: pl061: enable interrupts with DT style binding
From: Rob Herring <rob.herring@...xeda.com>
Enable DT interrupt binding support for pl061 gpio lines. If the gpio
node has an interrupt-controller property, then it will be setup to
handle interrupts on gpio lines.
Signed-off-by: Rob Herring <rob.herring@...xeda.com>
Cc: Grant Likely <grant.likely@...retlab.ca>
Cc: Linus Walleij <linus.ml.walleij@...il.com>
---
v2:
- use domain ptr from struct irq_chip_generic
- Add comment on irq_base values.
.../devicetree/bindings/gpio/pl061-gpio.txt | 15 +++++++++
drivers/gpio/gpio-pl061.c | 31 +++++++++++---------
2 files changed, 32 insertions(+), 14 deletions(-)
diff --git a/Documentation/devicetree/bindings/gpio/pl061-gpio.txt b/Documentation/devicetree/bindings/gpio/pl061-gpio.txt
index a2c416b..9671d4e 100644
--- a/Documentation/devicetree/bindings/gpio/pl061-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/pl061-gpio.txt
@@ -8,3 +8,18 @@ Required properties:
- gpio-controller : Marks the device node as a GPIO controller.
- interrupts : Interrupt mapping for GPIO IRQ.
+Optional properties:
+- interrupt-controller : Identifies the node as an interrupt controller. Must
+ be present if using gpios lines for interrupts.
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The type shall be a <u32> and the value shall be 2.
+
+ The 1st cell contains the interrupt number 0-7 corresponding to the gpio
+ line.
+
+ The 2nd cell is the flags, encoding trigger type and level flags.
+ 1 = low-to-high edge triggered
+ 2 = high-to-low edge triggered
+ 4 = active high level-sensitive
+ 8 = active low level-sensitive
+
diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
index 96ff6b2..ea799c7 100644
--- a/drivers/gpio/gpio-pl061.c
+++ b/drivers/gpio/gpio-pl061.c
@@ -16,6 +16,8 @@
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
#include <linux/bitops.h>
#include <linux/workqueue.h>
#include <linux/gpio.h>
@@ -52,7 +54,6 @@ struct pl061_gpio {
spinlock_t lock; /* GPIO registers */
void __iomem *base;
- int irq_base;
struct irq_chip_generic *irq_gc;
struct gpio_chip gc;
};
@@ -118,18 +119,16 @@ static void pl061_set_value(struct gpio_chip *gc, unsigned offset, int value)
static int pl061_to_irq(struct gpio_chip *gc, unsigned offset)
{
struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
-
- if (chip->irq_base <= 0)
- return -EINVAL;
-
- return chip->irq_base + offset;
+ if (!chip->irq_gc)
+ return -ENXIO;
+ return irq_domain_to_irq(&chip->irq_gc->domain, offset);
}
static int pl061_irq_type(struct irq_data *d, unsigned trigger)
{
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
struct pl061_gpio *chip = gc->private;
- int offset = d->irq - chip->irq_base;
+ int offset = d->hwirq;
unsigned long flags;
u8 gpiois, gpioibe, gpioiev;
@@ -219,7 +218,7 @@ static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
struct pl061_platform_data *pdata;
struct pl061_gpio *chip;
struct list_head *chip_list;
- int ret, irq, i;
+ int ret, irq, i, irq_base;
static DECLARE_BITMAP(init_irq, NR_IRQS);
chip = kzalloc(sizeof(*chip), GFP_KERNEL);
@@ -229,10 +228,13 @@ static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
pdata = dev->dev.platform_data;
if (pdata) {
chip->gc.base = pdata->gpio_base;
- chip->irq_base = pdata->irq_base;
+ irq_base = pdata->irq_base;
} else if (dev->dev.of_node) {
chip->gc.base = -1;
- chip->irq_base = 0;
+ if (of_get_property(dev->dev.of_node, "interrupt-controller", NULL))
+ irq_base = -1;
+ else
+ irq_base = 0;
} else {
ret = -ENODEV;
goto free_mem;
@@ -268,13 +270,14 @@ static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
goto iounmap;
/*
- * irq_chip support
+ * irq_chip support. If irq_base is 0, then we don't support interrupts
+ * on gpio lines and just return now. Otherwise setup the interrupts.
*/
-
- if (chip->irq_base <= 0)
+ if (!irq_base)
return 0;
- pl061_init_gc(chip, chip->irq_base);
+ pl061_init_gc(chip, irq_base);
+ chip->irq_gc->domain.of_node = of_node_get(dev->dev.of_node);
writeb(0, chip->base + GPIOIE); /* disable irqs */
irq = dev->irq[0];
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists