| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1324327927-6886-1-git-send-email-robherring2@gmail.com>
Date: Mon, 19 Dec 2011 14:52:07 -0600
From: Rob Herring <robherring2@...il.com>
To: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
devicetree-discuss@...ts.ozlabs.org
Cc: Grant Likely <grant.likely@...retlab.ca>,
Rob Herring <rob.herring@...xeda.com>,
Linus Walleij <linus.ml.walleij@...il.com>
Subject: [PATCH v2] gpio: pl061: convert to use generic irq chip
From: Rob Herring <rob.herring@...xeda.com>
Convert the pl061 irq_chip code to use the generic irq chip code.
This has the side effect of using 32-bit accesses rather than 8-bit
accesses to interrupt registers. The h/w TRM and testing seem to indicate
this is fine.
Signed-off-by: Rob Herring <rob.herring@...xeda.com>
Acked-by: Grant Likely <grant.likely@...retlab.ca>
Cc: Linus Walleij <linus.ml.walleij@...il.com>
---
v2:
- put struct irq_chip_generic pointer into struct pl061_gpio instead of domain
ptr.
drivers/gpio/Kconfig | 1 +
drivers/gpio/gpio-pl061.c | 74 ++++++++++++++++-----------------------------
2 files changed, 27 insertions(+), 48 deletions(-)
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 8482a23..4d433e2 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -138,6 +138,7 @@ config GPIO_MXS
config GPIO_PL061
bool "PrimeCell PL061 GPIO support"
depends on ARM_AMBA
+ select GENERIC_IRQ_CHIP
help
Say yes here to support the PrimeCell PL061 GPIO device
diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
index fe19dec..96ff6b2 100644
--- a/drivers/gpio/gpio-pl061.c
+++ b/drivers/gpio/gpio-pl061.c
@@ -50,10 +50,10 @@ struct pl061_gpio {
* the IRQ code simpler.
*/
spinlock_t lock; /* GPIO registers */
- spinlock_t irq_lock; /* IRQ registers */
void __iomem *base;
int irq_base;
+ struct irq_chip_generic *irq_gc;
struct gpio_chip gc;
};
@@ -125,40 +125,10 @@ static int pl061_to_irq(struct gpio_chip *gc, unsigned offset)
return chip->irq_base + offset;
}
-/*
- * PL061 GPIO IRQ
- */
-static void pl061_irq_disable(struct irq_data *d)
-{
- struct pl061_gpio *chip = irq_data_get_irq_chip_data(d);
- int offset = d->irq - chip->irq_base;
- unsigned long flags;
- u8 gpioie;
-
- spin_lock_irqsave(&chip->irq_lock, flags);
- gpioie = readb(chip->base + GPIOIE);
- gpioie &= ~(1 << offset);
- writeb(gpioie, chip->base + GPIOIE);
- spin_unlock_irqrestore(&chip->irq_lock, flags);
-}
-
-static void pl061_irq_enable(struct irq_data *d)
-{
- struct pl061_gpio *chip = irq_data_get_irq_chip_data(d);
- int offset = d->irq - chip->irq_base;
- unsigned long flags;
- u8 gpioie;
-
- spin_lock_irqsave(&chip->irq_lock, flags);
- gpioie = readb(chip->base + GPIOIE);
- gpioie |= 1 << offset;
- writeb(gpioie, chip->base + GPIOIE);
- spin_unlock_irqrestore(&chip->irq_lock, flags);
-}
-
static int pl061_irq_type(struct irq_data *d, unsigned trigger)
{
- struct pl061_gpio *chip = irq_data_get_irq_chip_data(d);
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct pl061_gpio *chip = gc->private;
int offset = d->irq - chip->irq_base;
unsigned long flags;
u8 gpiois, gpioibe, gpioiev;
@@ -166,7 +136,7 @@ static int pl061_irq_type(struct irq_data *d, unsigned trigger)
if (offset < 0 || offset >= PL061_GPIO_NR)
return -EINVAL;
- spin_lock_irqsave(&chip->irq_lock, flags);
+ raw_spin_lock_irqsave(&gc->lock, flags);
gpioiev = readb(chip->base + GPIOIEV);
@@ -195,18 +165,11 @@ static int pl061_irq_type(struct irq_data *d, unsigned trigger)
writeb(gpioiev, chip->base + GPIOIEV);
- spin_unlock_irqrestore(&chip->irq_lock, flags);
+ raw_spin_unlock_irqrestore(&gc->lock, flags);
return 0;
}
-static struct irq_chip pl061_irqchip = {
- .name = "GPIO",
- .irq_enable = pl061_irq_enable,
- .irq_disable = pl061_irq_disable,
- .irq_set_type = pl061_irq_type,
-};
-
static void pl061_irq_handler(unsigned irq, struct irq_desc *desc)
{
struct list_head *chip_list = irq_get_handler_data(irq);
@@ -232,6 +195,25 @@ static void pl061_irq_handler(unsigned irq, struct irq_desc *desc)
chained_irq_exit(irqchip, desc);
}
+static void __init pl061_init_gc(struct pl061_gpio *chip, int irq_base)
+{
+ struct irq_chip_type *ct;
+
+ chip->irq_gc = irq_alloc_generic_chip("gpio-pl061", 1, irq_base,
+ chip->base, handle_simple_irq);
+ chip->irq_gc->private = chip;
+
+ ct = chip->irq_gc->chip_types;
+ ct->chip.irq_mask = irq_gc_mask_clr_bit;
+ ct->chip.irq_unmask = irq_gc_mask_set_bit;
+ ct->chip.irq_set_type = pl061_irq_type;
+ ct->chip.irq_set_wake = irq_gc_set_wake;
+ ct->regs.mask = GPIOIE;
+
+ irq_setup_generic_chip(chip->irq_gc, IRQ_MSK(PL061_GPIO_NR),
+ IRQ_GC_INIT_NESTED_LOCK, IRQ_NOREQUEST, 0);
+}
+
static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
{
struct pl061_platform_data *pdata;
@@ -269,7 +251,6 @@ static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
}
spin_lock_init(&chip->lock);
- spin_lock_init(&chip->irq_lock);
INIT_LIST_HEAD(&chip->list);
chip->gc.direction_input = pl061_direction_input;
@@ -293,6 +274,8 @@ static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
if (chip->irq_base <= 0)
return 0;
+ pl061_init_gc(chip, chip->irq_base);
+
writeb(0, chip->base + GPIOIE); /* disable irqs */
irq = dev->irq[0];
if (irq < 0) {
@@ -321,11 +304,6 @@ static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
else
pl061_direction_input(&chip->gc, i);
}
-
- irq_set_chip_and_handler(i + chip->irq_base, &pl061_irqchip,
- handle_simple_irq);
- set_irq_flags(i+chip->irq_base, IRQF_VALID);
- irq_set_chip_data(i + chip->irq_base, chip);
}
return 0;
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists