| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1325690713.2758.13.camel@dabdike.int.hansenpartnership.com>
Date: Wed, 04 Jan 2012 09:25:13 -0600
From: James Bottomley <James.Bottomley@...senPartnership.com>
To: "Nandigama, Nagalakshmi" <Nagalakshmi.Nandigama@....com>,
"stable@...r.kernel.org" <stable@...r.kernel.org>
Cc: Greg KH <gregkh@...e.de>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"torvalds@...ux-foundation.org" <torvalds@...ux-foundation.org>,
"akpm@...ux-foundation.org" <akpm@...ux-foundation.org>,
"alan@...rguk.ukuu.org.uk" <alan@...rguk.ukuu.org.uk>,
"linux-scsi@...r.kernel.org" <linux-scsi@...r.kernel.org>,
"David S. Miller" <davem@...emloft.net>,
"Moore, Eric" <Eric.Moore@....com>
Subject: [PATCH] mpt2sas: fix non-x86 crash on shutdown
From: "nagalakshmi.nandigama@....com" <nagalakshmi.nandigama@....com>
Upstrem commit: 911ae9434f83e7355d343f6c2be3ef5b00ea7aed
There's a bug in the MSIX backup and restore routines that cause a crash on
non-x86 (direct access to PCI space not via read/write). These routines are
unnecessary and were removed by the above commit, so also remove them from
stable to fix the crash.
Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@....com>
Signed-off-by: James Bottomley <JBottomley@...allels.com>
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 83035bd..39e81cd 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -1082,41 +1082,6 @@ _base_config_dma_addressing(struct MPT2SAS_ADAPTER *ioc, struct pci_dev *pdev)
}
/**
- * _base_save_msix_table - backup msix vector table
- * @ioc: per adapter object
- *
- * This address an errata where diag reset clears out the table
- */
-static void
-_base_save_msix_table(struct MPT2SAS_ADAPTER *ioc)
-{
- int i;
-
- if (!ioc->msix_enable || ioc->msix_table_backup == NULL)
- return;
-
- for (i = 0; i < ioc->msix_vector_count; i++)
- ioc->msix_table_backup[i] = ioc->msix_table[i];
-}
-
-/**
- * _base_restore_msix_table - this restores the msix vector table
- * @ioc: per adapter object
- *
- */
-static void
-_base_restore_msix_table(struct MPT2SAS_ADAPTER *ioc)
-{
- int i;
-
- if (!ioc->msix_enable || ioc->msix_table_backup == NULL)
- return;
-
- for (i = 0; i < ioc->msix_vector_count; i++)
- ioc->msix_table[i] = ioc->msix_table_backup[i];
-}
-
-/**
* _base_check_enable_msix - checks MSIX capabable.
* @ioc: per adapter object
*
@@ -1128,7 +1093,7 @@ _base_check_enable_msix(struct MPT2SAS_ADAPTER *ioc)
{
int base;
u16 message_control;
- u32 msix_table_offset;
+
base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX);
if (!base) {
@@ -1141,14 +1106,8 @@ _base_check_enable_msix(struct MPT2SAS_ADAPTER *ioc)
pci_read_config_word(ioc->pdev, base + 2, &message_control);
ioc->msix_vector_count = (message_control & 0x3FF) + 1;
- /* get msix table */
- pci_read_config_dword(ioc->pdev, base + 4, &msix_table_offset);
- msix_table_offset &= 0xFFFFFFF8;
- ioc->msix_table = (u32 *)((void *)ioc->chip + msix_table_offset);
-
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "msix is supported, "
- "vector_count(%d), table_offset(0x%08x), table(%p)\n", ioc->name,
- ioc->msix_vector_count, msix_table_offset, ioc->msix_table));
+ "vector_count(%d)\n", ioc->name, ioc->msix_vector_count));
return 0;
}
@@ -1162,8 +1121,6 @@ _base_disable_msix(struct MPT2SAS_ADAPTER *ioc)
{
if (ioc->msix_enable) {
pci_disable_msix(ioc->pdev);
- kfree(ioc->msix_table_backup);
- ioc->msix_table_backup = NULL;
ioc->msix_enable = 0;
}
}
@@ -1189,14 +1146,6 @@ _base_enable_msix(struct MPT2SAS_ADAPTER *ioc)
if (_base_check_enable_msix(ioc) != 0)
goto try_ioapic;
- ioc->msix_table_backup = kcalloc(ioc->msix_vector_count,
- sizeof(u32), GFP_KERNEL);
- if (!ioc->msix_table_backup) {
- dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "allocation for "
- "msix_table_backup failed!!!\n", ioc->name));
- goto try_ioapic;
- }
-
memset(&entries, 0, sizeof(struct msix_entry));
r = pci_enable_msix(ioc->pdev, &entries, 1);
if (r) {
@@ -3513,9 +3462,6 @@ _base_diag_reset(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
u32 hcb_size;
printk(MPT2SAS_INFO_FMT "sending diag reset !!\n", ioc->name);
-
- _base_save_msix_table(ioc);
-
drsprintk(ioc, printk(MPT2SAS_INFO_FMT "clear interrupts\n",
ioc->name));
@@ -3611,7 +3557,6 @@ _base_diag_reset(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
goto out;
}
- _base_restore_msix_table(ioc);
printk(MPT2SAS_INFO_FMT "diag reset: SUCCESS\n", ioc->name);
return 0;
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 8d5be21..7df640f 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -636,8 +636,6 @@ enum mutex_type {
* @wait_for_port_enable_to_complete:
* @msix_enable: flag indicating msix is enabled
* @msix_vector_count: number msix vectors
- * @msix_table: virt address to the msix table
- * @msix_table_backup: backup msix table
* @scsi_io_cb_idx: shost generated commands
* @tm_cb_idx: task management commands
* @scsih_cb_idx: scsih internal commands
@@ -779,8 +777,6 @@ struct MPT2SAS_ADAPTER {
u8 msix_enable;
u16 msix_vector_count;
- u32 *msix_table;
- u32 *msix_table_backup;
u32 ioc_reset_count;
/* internal commands, callback index */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists