| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4F0AC06C.3000502@gmail.com>
Date: Mon, 09 Jan 2012 11:24:44 +0100
From: Christian Gmeiner <christian.gmeiner@...il.com>
To: linux-kernel@...r.kernel.org, akpm@...ux-foundation.org,
lars@...afoo.de
CC: bigeasy@...utronix.de, rpurdie@...ys.net
Subject: [PATCH v2] add led driver for Bachmann's ot200
From a7fecf3426ef98fdd19e9d2610665b9d1ce358a0 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior <bigeasy@...utronix.de
<mailto:bigeasy@...utronix.de>>
Date: Mon, 9 Jan 2012 10:09:50 +0100
Subject: [PATCH v2] add led driver for Bachmann's ot200
This patch adds support for leds on Bachmann's ot200 visualisation device.
The device has three leds on the back panel (led_err, led_init and led_run)
and can handle up to seven leds on the front panel.
The driver was written by Linutronix on behalf of
Bachmann electronic GmbH.
Changes in v2:
- *incorporated* feedback from Andrew Morton and Lars-Peter Clausen
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@...utronix.de
<mailto:bigeasy@...utronix.de>>
Signed-off-by: Christian Gmeiner <christian.gmeiner@...il.com
<mailto:christian.gmeiner@...il.com>>
---
drivers/leds/Kconfig | 7 ++
drivers/leds/Makefile | 1 +
drivers/leds/leds-ot200.c | 177
+++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 185 insertions(+), 0 deletions(-)
create mode 100644 drivers/leds/leds-ot200.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index ff203a4..71cb89b 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -387,6 +387,13 @@ config LEDS_RENESAS_TPU
pin function. The latter to support brightness control.
Brightness control is supported but hardware blinking is not.
+config LEDS_OT200
+ tristate "LED support for the Bachmann OT200"
+ depends on LEDS_CLASS
+ help
+ This option enables support for the LEDs on the Bachmann OT200.
+ Say Y to enable LEDs on the Bachmann OT200.
+
config LEDS_TRIGGERS
bool "LED Trigger support"
depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index e4f6bf5..0814d42 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
obj-$(CONFIG_LEDS_RENESAS_TPU) += leds-renesas-tpu.o
+obj-$(CONFIG_LEDS_OT200) += leds-ot200.o
# LED SPI Drivers
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
diff --git a/drivers/leds/leds-ot200.c b/drivers/leds/leds-ot200.c
new file mode 100644
index 0000000..4d000ac
--- /dev/null
+++ b/drivers/leds/leds-ot200.c
@@ -0,0 +1,177 @@
+/*
+ * Bachmann ot200 leds driver.
+ *
+ * Author: Sebastian Andrzej Siewior <bigeasy@...utronix.de>
+ * Christian Gmeiner <christian.gmeiner@...il.com>
+ *
+ * License: GPL as published by the FSF.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+
+struct ot200_led {
+ struct led_classdev cdev;
+ const char *name;
+ unsigned long port;
+ u8 mask;
+};
+
+/*
+ * The device has three leds on the back panel (led_err, led_init and
led_run)
+ * and can handle up to seven leds on the front panel.
+ */
+
+static struct ot200_led leds[] = {
+ {
+ .name = "led_run",
+ .port = 0x5a,
+ .mask = BIT(0),
+ },
+ {
+ .name = "led_init",
+ .port = 0x5a,
+ .mask = BIT(1),
+ },
+ {
+ .name = "led_err",
+ .port = 0x5a,
+ .mask = BIT(2),
+ },
+ {
+ .name = "led_1",
+ .port = 0x49,
+ .mask = BIT(7),
+ },
+ {
+ .name = "led_2",
+ .port = 0x49,
+ .mask = BIT(6),
+ },
+ {
+ .name = "led_3",
+ .port = 0x49,
+ .mask = BIT(5),
+ },
+ {
+ .name = "led_4",
+ .port = 0x49,
+ .mask = BIT(4),
+ },
+ {
+ .name = "led_5",
+ .port = 0x49,
+ .mask = BIT(3),
+ },
+ {
+ .name = "led_6",
+ .port = 0x49,
+ .mask = BIT(2),
+ },
+ {
+ .name = "led_7",
+ .port = 0x49,
+ .mask = BIT(1),
+ }
+};
+
+static DEFINE_SPINLOCK(value_lock);
+
+/*
+ * we need to store the current led states, as it is not
+ * possible to read the current led state via inb().
+ */
+static u8 leds_back;
+static u8 leds_front;
+
+static void ot200_led_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct ot200_led *led = container_of(led_cdev, struct ot200_led, cdev);
+ u8 *val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&value_lock, flags);
+
+ if (led->port == 0x49)
+ val = &leds_front;
+ else if (led->port == 0x5a)
+ val = &leds_back;
+ else
+ BUG();
+
+ if (value == LED_OFF)
+ *val &= ~led->mask;
+ else
+ *val |= led->mask;
+
+ outb(*val, led->port);
+ spin_unlock_irqrestore(&value_lock, flags);
+}
+
+static int __devinit ot200_led_probe(struct platform_device *pdev)
+{
+ int i;
+ int ret;
+
+ for (i = 0; i < ARRAY_SIZE(leds); i++) {
+
+ leds[i].cdev.name = leds[i].name;
+ leds[i].cdev.default_trigger = NULL;
+ leds[i].cdev.blink_set = NULL;
+ leds[i].cdev.brightness_set = ot200_led_brightness_set;
+
+ ret = led_classdev_register(&pdev->dev, &leds[i].cdev);
+ if (ret < 0)
+ goto err;
+
+ dev_set_drvdata(leds[i].cdev.dev, &leds[i]);
+ }
+
+ platform_set_drvdata(pdev, leds);
+
+ outb(0x0, 0x49); /* turn off all front leds */
+ outb(0x2, 0x5a); /* turn on init led */
+ leds_front = 0;
+ leds_back = BIT(1);
+
+ return 0;
+
+err:
+ for (i = i - 1; i >= 0; i--)
+ led_classdev_unregister(&leds[i].cdev);
+
+ return ret;
+}
+
+static int __devexit ot200_led_remove(struct platform_device *pdev)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(leds); i++)
+ led_classdev_unregister(&leds[i].cdev);
+
+ return 0;
+}
+
+static struct platform_driver ot200_led_driver = {
+ .probe = ot200_led_probe,
+ .remove = __devexit_p(ot200_led_remove),
+ .driver = {
+ .name = "leds-ot200",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(ot200_led_driver);
+
+MODULE_AUTHOR("Sebastian A. Siewior <bigeasy@...utronix.de>");
+MODULE_DESCRIPTION("ot200 LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:leds-ot200");
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists