lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4F12B42C.9030803@bootc.net>
Date:	Sun, 15 Jan 2012 11:10:36 +0000
From:	Chris Boot <bootc@...tc.net>
To:	"Wyborny, Carolyn" <carolyn.wyborny@...el.com>
CC:	netdev <netdev@...r.kernel.org>,
	lkml <linux-kernel@...r.kernel.org>,
	"e1000-devel@...ts.sourceforge.net" 
	<e1000-devel@...ts.sourceforge.net>
Subject: Re: e1000e interface hang on 82574L

On 04/01/2012 17:12, Chris Boot wrote:
> On 03/01/2012 00:02, Wyborny, Carolyn wrote:
>>
>>
>>> -----Original Message-----
>>> From: netdev-owner@...r.kernel.org [mailto:netdev-owner@...r.kernel.org]
>>> On Behalf Of Chris Boot
>>> Sent: Saturday, December 31, 2011 1:32 AM
>>> To: netdev; lkml; e1000-devel@...ts.sourceforge.net
>>> Subject: Re: e1000e interface hang on 82574L
>>>
>>> On 27 Dec 2011, at 22:01, Chris Boot wrote:
>>>
>>>> Hi folks,
>>>>
>>>> Another networking issue I've run into, this time with e1000e (Intel
>>> Corporation 82574L Gigabit). My new VM cluster appears to drop a NIC -
>>> the port stops responding within Linux and shows the link as being down
>>> with ethtool. My ISP says 'Ports running Half Duplex or reduced speed'
>>> on the port.
>>>>
>>>> When the port stops working I see this in dmesg:
>>>>
>>>> [35481.659629] ------------[ cut here ]------------
>>>> [35481.667837] WARNING: at net/sched/sch_generic.c:255
>>> dev_watchdog+0xe9/0x148()
>>>> [35481.676370] Hardware name: X9SCL/X9SCM
>>>> [35481.684793] NETDEV WATCHDOG: eth2 (e1000e): transmit queue 0 timed
>>> out
>>>> [35481.684795] Modules linked in: hmac sha256_generic dlm configfs
>>> ebtable_nat ebtables acpi_cpufreq mperf cpufreq_stats
>>> cpufreq_conservative cpufreq_userspace cpufreq_powersave microcode
>>> xt_NOTRACK ip_set_hash_net act_police cls_basic cls_flow cls_fw cls_u32
>>> sch_tbf sch_prio sch_htb sch_hfsc sch_ingress sch_sfq xt_connlimit
>>> xt_realm xt_addrtype ip_set_hash_ip iptable_raw xt_comment xt_recent
>>> ipt_ULOG ipt_REJECT ipt_REDIRECT ipt_NETMAP ipt_MASQUERADE ipt_ECN
>>> ipt_ecn ipt_CLUSTERIP ipt_ah nf_nat_tftp nf_nat_snmp_basic
>>> nf_conntrack_snmp nf_nat_sip nf_nat_pptp nf_nat_proto_gre nf_nat_irc
>>> nf_nat_h323 nf_nat_ftp ip6_queue nf_nat_amanda xt_set ip_set
>>> nf_conntrack_tftp nf_conntrack_sip nf_conntrack_sane
>>> nf_conntrack_proto_udplite nf_conntrack_proto_sctp nf_conntrack_pptp
>>> nf_conntrack_proto_gre nf_conntrack_netlink nf_conntrack_netbios_ns
>>> nf_conntrack_broadcast nf_conntrack_irc nf_conntrack_h323
>>> nf_conntrack_ftp ts_kmp nf_conntrack_amanda xt_TPROXY xt_NFLOG
>>> nfnetlink_log nf_tproxy_core xt_time xt_TCPMSS xt_tcpmss xt_sctp
>>> xt_policy xt_pkttype xt_physdev xt_owner xt_NFQUEUE xt_multiport xt_mark
>>> xt_mac xt_limit xt_length xt_iprange xt_helper xt_hashlimit xt_DSCP
>>> xt_dscp xt_dccp xt_connmark xt_CLASSIFY xt_AUDIT ip6t_LOG ip6t_REJECT
>>> nf_conntrack_ipv6 nf_defrag_ipv6 xt_conntrack ip6table_raw ipt_LOG
>>> xt_tcpudp ip6table_mangle xt_state iptable_nat nf_nat nf_conntrack_ipv4
>>> nf_defrag_ipv4 nf_conntrack iptable_mangle nfnetlink iptable_filter
>>> ip_tables ip6table_filter ip6_tables x_tables bridge stp bonding
>>> w83627ehf hwmon_vid coretemp sha1_ssse3 sha1_generic crc32c_intel
>>> aesni_intel cryptd aes_x86_64 aes_generic ipmi_poweroff ipmi_devintf
>>> ipmi_si ipmi_msghandler vhost_net macvtap macvlan tun drbd lru_cache cn
>>> loop kvm_intel kvm snd_pcm snd_timer snd iTCO_wdt soundcore psmouse
>>> snd_page_alloc i2c_i801 i2c_core cdc_acm iTCO_vendor_support joydev
>>> evdev serio_raw processor button pcspkr thermal_sys ext4 mbcache jbd2
>>> crc16 dm_mod raid1 md_mod sd_mod crc_t10dif usb_storage uas usbhid hid
>>> ahci libahci libata igb ehci_hcd scsi_mod usbcore e1000e dca usb_common
>>> [last unloaded: scsi_wait_scan]
>>>> [35481.685740] Pid: 0, comm: swapper/4 Not tainted 3.2.0-rc6+ #4
>>>> [35481.685744] Call Trace:
>>>> [35481.685746]<IRQ> [<ffffffff810467ed>] ?
>>> warn_slowpath_common+0x78/0x8c
>>>> [35481.685849] [<ffffffff81046899>] ? warn_slowpath_fmt+0x45/0x4a
>>>> [35481.685875] [<ffffffff810aeaa0>] ?
>>> perf_event_task_tick+0x166/0x1ab
>>>> [35481.686018] [<ffffffff81294219>] ? netif_tx_lock+0x40/0x72
>>>> [35481.686090] [<ffffffff8129437a>] ? dev_watchdog+0xe9/0x148
>>>> [35481.686136] [<ffffffff81051e58>] ? run_timer_softirq+0x19a/0x261
>>>> [35481.686176] [<ffffffff81294291>] ? netif_tx_unlock+0x46/0x46
>>>> [35481.686215] [<ffffffff810659bb>] ? timekeeping_get_ns+0xd/0x2a
>>>> [35481.686286] [<ffffffff8104bdd4>] ? __do_softirq+0xb9/0x177
>>>> [35481.686365] [<ffffffff81341d6c>] ? call_softirq+0x1c/0x30
>>>> [35481.686530] [<ffffffff8100f841>] ? do_softirq+0x3c/0x7b
>>>> [35481.686580] [<ffffffff8104c03c>] ? irq_exit+0x3c/0x9a
>>>> [35481.686742] [<ffffffff81023e58>] ?
>>> smp_apic_timer_interrupt+0x74/0x82
>>>> [35481.686820] [<ffffffff813405de>] ? apic_timer_interrupt+0x6e/0x80
>>>> [35481.686826]<EOI> [<ffffffff811ddf49>] ? intel_idle+0xea/0x119
>>>> [35481.686991] [<ffffffff811ddf28>] ? intel_idle+0xc9/0x119
>>>> [35481.687051] [<ffffffff8125dce3>] ? cpuidle_idle_call+0xec/0x179
>>>> [35481.687089] [<ffffffff8100d255>] ? cpu_idle+0xa1/0xe8
>>>> [35481.687143] [<ffffffff810706ee>] ? arch_local_irq_restore+0x2/0x8
>>>> [35481.687189] [<ffffffff8132d191>] ? start_secondary+0x1d5/0x1db
>>>> [35481.687234] ---[ end trace 01e9907674757948 ]---
>>>> [35481.687817] e1000e 0000:05:00.0: eth2: Reset adapter
>>>>
>>>> To try to regain connectivity I bring down the bond and the interface
>>> (eth2), then unload e1000e. Upon loading the module again:
>>>>
>>>> [36021.888962] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
>>>> [36021.900258] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
>>>> [36021.911446] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -
>>>> IRQ 20
>>>> [36021.923204] e1000e 0000:00:19.0: setting latency timer to 64
>>>> [36021.923372] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>>>> [36022.202737] e1000e 0000:00:19.0: eth2: (PCI Express:2.5GT/s:Width
>>> x1) 00:25:90:56:ac:75
>>>> [36022.214480] e1000e 0000:00:19.0: eth3: Intel(R) PRO/1000 Network
>>> Connection
>>>> [36022.227506] e1000e 0000:00:19.0: eth3: MAC: 10, PHY: 11, PBA No:
>>> FFFFFF-0FF
>>>> [36022.239789] e1000e 0000:05:00.0: Disabling ASPM L0s
>>>> [36022.239805] e1000e 0000:05:00.0: enabling device (0000 -> 0002)
>>>> [36022.239829] e1000e 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -
>>>> IRQ 16
>>>> [36022.239921] e1000e 0000:05:00.0: setting latency timer to 64
>>>> [36022.240963] e1000e 0000:05:00.0: irq 64 for MSI/MSI-X
>>>> [36022.240995] e1000e 0000:05:00.0: irq 65 for MSI/MSI-X
>>>> [36022.241028] e1000e 0000:05:00.0: irq 66 for MSI/MSI-X
>>>> [36022.241596] e1000e 0000:05:00.0: PCI INT A disabled
>>>> [36022.241606] e1000e: probe of 0000:05:00.0 failed with error -2
>>>> [36022.304706] udevd[3634]: renamed network interface eth2 to eth3
>>>>
>>>> I then don't get an eth2 interface. Only a reboot brings the interface
>>> back. This has happened twice so far on this server in the past week,
>>> both times using v3.2-rc7-3-g4962516.
>>>>
>>>> lspci -vnn shows:
>>>>
>>>> 05:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit
>>> Network Connection [8086:10d3]
>>>> Subsystem: Super Micro Computer Inc Device [15d9:0000]
>>>> Flags: bus master, fast devsel, latency 0, IRQ 16
>>>> Memory at fbd00000 (32-bit, non-prefetchable) [size=128K]
>>>> I/O ports at e000 [size=32]
>>>> Memory at fbd20000 (32-bit, non-prefetchable) [size=16K]
>>>> Capabilities: [c8] Power Management version 2
>>>> Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
>>>> Capabilities: [e0] Express Endpoint, MSI 00
>>>> Capabilities: [a0] MSI-X: Enable+ Count=5 Masked-
>>>> Capabilities: [100] Advanced Error Reporting
>>>> Capabilities: [140] Device Serial Number 00-25-90-ff-ff-56-ac-
>>> 74
>>>> Kernel driver in use: e1000e
>>>
>>> I've just had this happen on my other (identical) server with a nearly
>>> identical trace. Is there anything I can do do avoid this at all or at
>>> least help narrow down the problem?
>>>
>>> Cheers,
>>> Chris
>>>
>>> --
>>> Chris Boot
>>> bootc@...tc.net
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe netdev" in
>>> the body of a message to majordomo@...r.kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>> Hello,
>>
>> Sorry for the delay in responding. We have seen some hang issues using
>> MSI-X on 82574 parts. Can you try reloading the driver the IntMode
>> module parameter. IntMode=1 (you'll need a setting for each device in
>> the system so two adapters would be IntMode=1,1) See if that changes
>> the symptom you are seeing with this part. That setting will make sure
>> the adapter uses MSI interrupts instead of MSI-X.
>
> Carolyn,
>
> I'll give this a go next time I reproduce it. I built a new kernel with
> more debugging and so far it hasn't yet triggered again...

Upgrading to a more recent 3.2-rc snapshot seems to have cured the 
problem - I haven't had an interface stop responding since. Must have 
been some seemingly unrelated patch that I can't seem to locate.

Cheers,
Chris

-- 
Chris Boot
bootc@...tc.net
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ