[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20120118015955.GA30184@havoc.gtf.org>
Date: Tue, 17 Jan 2012 20:59:55 -0500
From: Jeff Garzik <jeff@...zik.org>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-ide@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: [git patches] libata bug fixes
Summary:
1) PM async fix
2) additional ata_piix, CD-ROM quirks
3) sata_fsl minor vendor update
4) pata_bf54x "make DMA actually work"
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Please pull b73fa4630e63e4d23407181c2bc0a54777bd0ce8 from
git://github.com/jgarzik/libata-dev.git upstream-linus
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIVAwUBTxYm4SWzCDIBeCsvAQIUmw//ZmCgcsoPOXDz5s2zBHwiNWK50P1GmnTa
SVoe7iDPfmwArS4OUhpP3mee2ff+N/96mCazX6JQRT1FMbP8uRjdUkz8hQpxqlSL
ZCyRFbgy2J0RY6D6BD51b2Ltk8BTqjiRV63QAWiU7R15e8a0tNnHYhSB4CZlwue0
dPJ62gAMsyE6qEE3p49jeBBypxYCOUXBqFGwXYRaov7z+U88lfz7JCgZ/HnHSqJq
FVQqOcbC7bwqFfy59Qz8HTcBxvt6DXjkBw+L1d6jk0bL7H3NL2unvtso50ygjxHc
u7v8GvopFuXthJqCJO7XaftgGICwlY9LXmYG7wPsjtPTGV8hVo9JPNgCvBVwYT21
aCO3vlvjqiphJnOu+8G8cQUpMR5w+hKTqmnvM7RbSwEdl2eCujAOAH57bwIswdtM
wRxHDyDqUUx5+ZKgz62YdzGioraODtTRvnq6qfA+I7xplZbwkqZCV2eBcLIwP97G
3ofpQsjV+bpuZuLq4+oZlWUybwypnOxyronQQDYH4Olns+X4SrL31Gs3t7XfHsBV
B5tisuK4c/Cce8s0yNzhr5aAOFauQ7WZmOZmx/BTqeT6KX4va5jgaxMr0FINRAv0
OVrBbBYJTK9kS+xwmi+Xbe2wb7Ek2CSt6WGArOW/Dl7EzYP3WXMTu73kizwnFD/L
t4Zh+BlRsp8=
=4Nh2
-----END PGP SIGNATURE-----
to receive the following updates:
drivers/ata/ata_piix.c | 7 ++
drivers/ata/libata-core.c | 2 +
drivers/ata/libata-transport.c | 1 +
drivers/ata/pata_bf54x.c | 167 +++++++++++++++++++++-------------------
drivers/ata/sata_fsl.c | 11 +++
5 files changed, 109 insertions(+), 79 deletions(-)
Benjamin Larsson (1):
[libata] ata_piix: Add Toshiba Satellite Pro A120 to the quirks list due to broken suspend functionality.
Jerry Huang (1):
[libata] sata_fsl: fix the controller operating mode
Lin Ming (1):
[libata] enable ata port async suspend
Sonic Zhang (1):
[libata] pata_bf54x: Support sg list in bmdma transfer.
Vladimir LAVALLADE (1):
[libata] add DVRTD08A and DVR-215 to NOSETXFER device quirk list
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 69ac373..fdf27b9 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1117,6 +1117,13 @@ static int piix_broken_suspend(void)
},
},
{
+ .ident = "Satellite Pro A120",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Satellite Pro A120"),
+ },
+ },
+ {
.ident = "Portege M500",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 11c9aea..c06e0ec 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4125,6 +4125,8 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
* device and controller are SATA.
*/
{ "PIONEER DVD-RW DVRTD08", NULL, ATA_HORKAGE_NOSETXFER },
+ { "PIONEER DVD-RW DVRTD08A", NULL, ATA_HORKAGE_NOSETXFER },
+ { "PIONEER DVD-RW DVR-215", NULL, ATA_HORKAGE_NOSETXFER },
{ "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER },
{ "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER },
diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c
index 9a7f0ea..74aaee3 100644
--- a/drivers/ata/libata-transport.c
+++ b/drivers/ata/libata-transport.c
@@ -291,6 +291,7 @@ int ata_tport_add(struct device *parent,
goto tport_err;
}
+ device_enable_async_suspend(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index d6a4677..1e65842 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -251,6 +251,8 @@ static const u32 udma_tenvmin = 20;
static const u32 udma_tackmin = 20;
static const u32 udma_tssmin = 50;
+#define BFIN_MAX_SG_SEGMENTS 4
+
/**
*
* Function: num_clocks_min
@@ -829,79 +831,61 @@ static void bfin_set_devctl(struct ata_port *ap, u8 ctl)
static void bfin_bmdma_setup(struct ata_queued_cmd *qc)
{
- unsigned short config = WDSIZE_16;
+ struct ata_port *ap = qc->ap;
+ struct dma_desc_array *dma_desc_cpu = (struct dma_desc_array *)ap->bmdma_prd;
+ void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
+ unsigned short config = DMAFLOW_ARRAY | NDSIZE_5 | RESTART | WDSIZE_16 | DMAEN;
struct scatterlist *sg;
unsigned int si;
+ unsigned int channel;
+ unsigned int dir;
+ unsigned int size = 0;
dev_dbg(qc->ap->dev, "in atapi dma setup\n");
/* Program the ATA_CTRL register with dir */
if (qc->tf.flags & ATA_TFLAG_WRITE) {
- /* fill the ATAPI DMA controller */
- set_dma_config(CH_ATAPI_TX, config);
- set_dma_x_modify(CH_ATAPI_TX, 2);
- for_each_sg(qc->sg, sg, qc->n_elem, si) {
- set_dma_start_addr(CH_ATAPI_TX, sg_dma_address(sg));
- set_dma_x_count(CH_ATAPI_TX, sg_dma_len(sg) >> 1);
- }
+ channel = CH_ATAPI_TX;
+ dir = DMA_TO_DEVICE;
} else {
+ channel = CH_ATAPI_RX;
+ dir = DMA_FROM_DEVICE;
config |= WNR;
- /* fill the ATAPI DMA controller */
- set_dma_config(CH_ATAPI_RX, config);
- set_dma_x_modify(CH_ATAPI_RX, 2);
- for_each_sg(qc->sg, sg, qc->n_elem, si) {
- set_dma_start_addr(CH_ATAPI_RX, sg_dma_address(sg));
- set_dma_x_count(CH_ATAPI_RX, sg_dma_len(sg) >> 1);
- }
}
-}
-/**
- * bfin_bmdma_start - Start an IDE DMA transaction
- * @qc: Info associated with this ATA transaction.
- *
- * Note: Original code is ata_bmdma_start().
- */
+ dma_map_sg(ap->dev, qc->sg, qc->n_elem, dir);
-static void bfin_bmdma_start(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
- struct scatterlist *sg;
- unsigned int si;
+ /* fill the ATAPI DMA controller */
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
+ dma_desc_cpu[si].start_addr = sg_dma_address(sg);
+ dma_desc_cpu[si].cfg = config;
+ dma_desc_cpu[si].x_count = sg_dma_len(sg) >> 1;
+ dma_desc_cpu[si].x_modify = 2;
+ size += sg_dma_len(sg);
+ }
- dev_dbg(qc->ap->dev, "in atapi dma start\n");
- if (!(ap->udma_mask || ap->mwdma_mask))
- return;
+ /* Set the last descriptor to stop mode */
+ dma_desc_cpu[qc->n_elem - 1].cfg &= ~(DMAFLOW | NDSIZE);
- /* start ATAPI DMA controller*/
- if (qc->tf.flags & ATA_TFLAG_WRITE) {
- /*
- * On blackfin arch, uncacheable memory is not
- * allocated with flag GFP_DMA. DMA buffer from
- * common kenel code should be flushed if WB
- * data cache is enabled. Otherwise, this loop
- * is an empty loop and optimized out.
- */
- for_each_sg(qc->sg, sg, qc->n_elem, si) {
- flush_dcache_range(sg_dma_address(sg),
- sg_dma_address(sg) + sg_dma_len(sg));
- }
- enable_dma(CH_ATAPI_TX);
- dev_dbg(qc->ap->dev, "enable udma write\n");
+ flush_dcache_range((unsigned int)dma_desc_cpu,
+ (unsigned int)dma_desc_cpu +
+ qc->n_elem * sizeof(struct dma_desc_array));
- /* Send ATA DMA write command */
- bfin_exec_command(ap, &qc->tf);
+ /* Enable ATA DMA operation*/
+ set_dma_curr_desc_addr(channel, (unsigned long *)ap->bmdma_prd_dma);
+ set_dma_x_count(channel, 0);
+ set_dma_x_modify(channel, 0);
+ set_dma_config(channel, config);
+
+ SSYNC();
+
+ /* Send ATA DMA command */
+ bfin_exec_command(ap, &qc->tf);
+ if (qc->tf.flags & ATA_TFLAG_WRITE) {
/* set ATA DMA write direction */
ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base)
| XFER_DIR));
} else {
- enable_dma(CH_ATAPI_RX);
- dev_dbg(qc->ap->dev, "enable udma read\n");
-
- /* Send ATA DMA read command */
- bfin_exec_command(ap, &qc->tf);
-
/* set ATA DMA read direction */
ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base)
& ~XFER_DIR));
@@ -913,12 +897,28 @@ static void bfin_bmdma_start(struct ata_queued_cmd *qc)
/* Set ATAPI state machine contorl in terminate sequence */
ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | END_ON_TERM);
- /* Set transfer length to buffer len */
- for_each_sg(qc->sg, sg, qc->n_elem, si) {
- ATAPI_SET_XFER_LEN(base, (sg_dma_len(sg) >> 1));
- }
+ /* Set transfer length to the total size of sg buffers */
+ ATAPI_SET_XFER_LEN(base, size >> 1);
+}
- /* Enable ATA DMA operation*/
+/**
+ * bfin_bmdma_start - Start an IDE DMA transaction
+ * @qc: Info associated with this ATA transaction.
+ *
+ * Note: Original code is ata_bmdma_start().
+ */
+
+static void bfin_bmdma_start(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
+
+ dev_dbg(qc->ap->dev, "in atapi dma start\n");
+
+ if (!(ap->udma_mask || ap->mwdma_mask))
+ return;
+
+ /* start ATAPI transfer*/
if (ap->udma_mask)
ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base)
| ULTRA_START);
@@ -935,34 +935,23 @@ static void bfin_bmdma_start(struct ata_queued_cmd *qc)
static void bfin_bmdma_stop(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
- struct scatterlist *sg;
- unsigned int si;
+ unsigned int dir;
dev_dbg(qc->ap->dev, "in atapi dma stop\n");
+
if (!(ap->udma_mask || ap->mwdma_mask))
return;
/* stop ATAPI DMA controller*/
- if (qc->tf.flags & ATA_TFLAG_WRITE)
+ if (qc->tf.flags & ATA_TFLAG_WRITE) {
+ dir = DMA_TO_DEVICE;
disable_dma(CH_ATAPI_TX);
- else {
+ } else {
+ dir = DMA_FROM_DEVICE;
disable_dma(CH_ATAPI_RX);
- if (ap->hsm_task_state & HSM_ST_LAST) {
- /*
- * On blackfin arch, uncacheable memory is not
- * allocated with flag GFP_DMA. DMA buffer from
- * common kenel code should be invalidated if
- * data cache is enabled. Otherwise, this loop
- * is an empty loop and optimized out.
- */
- for_each_sg(qc->sg, sg, qc->n_elem, si) {
- invalidate_dcache_range(
- sg_dma_address(sg),
- sg_dma_address(sg)
- + sg_dma_len(sg));
- }
- }
}
+
+ dma_unmap_sg(ap->dev, qc->sg, qc->n_elem, dir);
}
/**
@@ -1260,6 +1249,11 @@ static void bfin_port_stop(struct ata_port *ap)
{
dev_dbg(ap->dev, "in atapi port stop\n");
if (ap->udma_mask != 0 || ap->mwdma_mask != 0) {
+ dma_free_coherent(ap->dev,
+ BFIN_MAX_SG_SEGMENTS * sizeof(struct dma_desc_array),
+ ap->bmdma_prd,
+ ap->bmdma_prd_dma);
+
free_dma(CH_ATAPI_RX);
free_dma(CH_ATAPI_TX);
}
@@ -1271,14 +1265,29 @@ static int bfin_port_start(struct ata_port *ap)
if (!(ap->udma_mask || ap->mwdma_mask))
return 0;
+ ap->bmdma_prd = dma_alloc_coherent(ap->dev,
+ BFIN_MAX_SG_SEGMENTS * sizeof(struct dma_desc_array),
+ &ap->bmdma_prd_dma,
+ GFP_KERNEL);
+
+ if (ap->bmdma_prd == NULL) {
+ dev_info(ap->dev, "Unable to allocate DMA descriptor array.\n");
+ goto out;
+ }
+
if (request_dma(CH_ATAPI_RX, "BFIN ATAPI RX DMA") >= 0) {
if (request_dma(CH_ATAPI_TX,
"BFIN ATAPI TX DMA") >= 0)
return 0;
free_dma(CH_ATAPI_RX);
+ dma_free_coherent(ap->dev,
+ BFIN_MAX_SG_SEGMENTS * sizeof(struct dma_desc_array),
+ ap->bmdma_prd,
+ ap->bmdma_prd_dma);
}
+out:
ap->udma_mask = 0;
ap->mwdma_mask = 0;
dev_err(ap->dev, "Unable to request ATAPI DMA!"
@@ -1400,7 +1409,7 @@ static irqreturn_t bfin_ata_interrupt(int irq, void *dev_instance)
static struct scsi_host_template bfin_sht = {
ATA_BASE_SHT(DRV_NAME),
- .sg_tablesize = SG_NONE,
+ .sg_tablesize = BFIN_MAX_SG_SEGMENTS,
.dma_boundary = ATA_DMA_BOUNDARY,
};
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 5a2c95b..0120b0d 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -140,6 +140,7 @@ enum {
*/
HCONTROL_ONLINE_PHY_RST = (1 << 31),
HCONTROL_FORCE_OFFLINE = (1 << 30),
+ HCONTROL_LEGACY = (1 << 28),
HCONTROL_PARITY_PROT_MOD = (1 << 14),
HCONTROL_DPATH_PARITY = (1 << 12),
HCONTROL_SNOOP_ENABLE = (1 << 10),
@@ -1223,6 +1224,10 @@ static int sata_fsl_init_controller(struct ata_host *host)
* part of the port_start() callback
*/
+ /* sata controller to operate in enterprise mode */
+ temp = ioread32(hcr_base + HCONTROL);
+ iowrite32(temp & ~HCONTROL_LEGACY, hcr_base + HCONTROL);
+
/* ack. any pending IRQs for this controller/port */
temp = ioread32(hcr_base + HSTATUS);
if (temp & 0x3F)
@@ -1421,6 +1426,12 @@ static int sata_fsl_resume(struct platform_device *op)
/* Recovery the CHBA register in host controller cmd register set */
iowrite32(pp->cmdslot_paddr & 0xffffffff, hcr_base + CHBA);
+ iowrite32((ioread32(hcr_base + HCONTROL)
+ | HCONTROL_ONLINE_PHY_RST
+ | HCONTROL_SNOOP_ENABLE
+ | HCONTROL_PMP_ATTACHED),
+ hcr_base + HCONTROL);
+
ata_host_resume(host);
return 0;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists