| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4F1A98F5.3080402@freemail.hu>
Date: Sat, 21 Jan 2012 11:52:37 +0100
From: Németh Márton <nm127@...email.hu>
To: Chris Ball <cjb@...top.org>, linux-mmc@...r.kernel.org,
Greg Kroah-Hartman <gregkh@...e.de>, devel@...verdev.osuosl.org
CC: techeng <dzshen@...il.com>, clyu@...iz.net,
LKML <linux-kernel@...r.kernel.org>
Subject: [PATCH] Add Winbond WB528SD Secure Digital (SD) card reader driver
From: Márton Németh <nm127@...email.hu>
This driver version of Winbond WB528SD can detect mechanical card
presence only. The information is provided through sysfs.
Signed-off-by: Márton Németh <nm127@...email.hu>
Cc: techeng <dzshen@...il.com>
---
drivers/staging/Kconfig | 2 +
drivers/staging/Makefile | 1 +
drivers/staging/wb528sd/Kconfig | 16 ++
drivers/staging/wb528sd/Makefile | 1 +
drivers/staging/wb528sd/wb528sd.c | 274 +++++++++++++++++++++++++++++++++++++
5 files changed, 294 insertions(+), 0 deletions(-)
create mode 100644 drivers/staging/wb528sd/Kconfig
create mode 100644 drivers/staging/wb528sd/Makefile
create mode 100644 drivers/staging/wb528sd/wb528sd.c
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 21e2f4b..c1ce429 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -132,4 +132,6 @@ source "drivers/staging/omapdrm/Kconfig"
source "drivers/staging/android/Kconfig"
+source "drivers/staging/wb528sd/Kconfig"
+
endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 7c5808d..7da8c3b 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -57,3 +57,4 @@ obj-$(CONFIG_INTEL_MEI) += mei/
obj-$(CONFIG_MFD_NVEC) += nvec/
obj-$(CONFIG_DRM_OMAP) += omapdrm/
obj-$(CONFIG_ANDROID) += android/
+obj-$(CONFIG_WB528SD) += wb528sd/
diff --git a/drivers/staging/wb528sd/Kconfig b/drivers/staging/wb528sd/Kconfig
new file mode 100644
index 0000000..b7af426
--- /dev/null
+++ b/drivers/staging/wb528sd/Kconfig
@@ -0,0 +1,16 @@
+config WB528SD
+ tristate "Winbond 528SD Secure Digital (SD) card reader"
+ depends on PCI
+ help
+ The Winbond 528SD Secure Digital (SD) card reader connects to
+ the PCI bus and can be found in laptop Clevo model D4J, product
+ code D410J. It can be identified by its PCI ID 1050:8481
+ (for example by using "lspci" and "lspci -n" commands).
+ The driver currently only detects whether an SD card is
+ mechanically inserted in the reader (dummy SD card is also
+ detected). The information can be fetched in Clevo D410J
+ with the command
+ "cat /sys/devices/pci0000:00/0000:00:0e.0/card_present".
+
+ Currently (Jan 2012) there is a lack of register description
+ of this device.
diff --git a/drivers/staging/wb528sd/Makefile b/drivers/staging/wb528sd/Makefile
new file mode 100644
index 0000000..758026d
--- /dev/null
+++ b/drivers/staging/wb528sd/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_WB528SD) += wb528sd.o
diff --git a/drivers/staging/wb528sd/wb528sd.c b/drivers/staging/wb528sd/wb528sd.c
new file mode 100644
index 0000000..7f6380a
--- /dev/null
+++ b/drivers/staging/wb528sd/wb528sd.c
@@ -0,0 +1,274 @@
+/*
+ * Winbond 528SD Secure Digital (SD) card reader
+ *
+ * # lspci -d 1050:8481 -vv -xx
+ * 00:0e.0 Mass storage controller: Winbond Electronics Corp Device 8481 (rev 01)
+ * Subsystem: Winbond Electronics Corp Device 1050
+ * Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ * Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
+ * Interrupt: pin A routed to IRQ 19
+ * Region 0: Memory at d0001000 (32-bit, non-prefetchable) [size=4K]
+ * Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=4K]
+ * Capabilities: [c0] Power Management version 2
+ * Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
+ * Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
+ * 00: 50 10 81 84 13 00 90 0a 01 00 80 01 10 42 80 00
+ * 10: 00 10 00 d0 00 00 00 d0 00 00 00 00 00 00 00 00
+ * 20: 00 00 00 00 00 00 00 00 00 00 00 00 50 10 50 10
+ * 30: 00 00 00 00 c0 00 00 00 00 00 00 00 05 01 08 1a
+ *
+ * There are two memory mapped regions: region 0 and region 1.
+ * Region 0 has a 4KiB address window but it contains only 256 bytes
+ * of registers, the same registers repeats every 256 bytes.
+ * Region 1 truly has a 4KiB address window.
+ *
+ * There is one interrupt associated to this device.
+ *
+ * Region 0 registers:
+ * BASE0+0x00: ?
+ * ...
+ * BASE0+0xFF: ?
+ *
+ * Region 1 registers:
+ * BASE1+0x000: ?
+ * ...
+ * BASE1+0x51C: bit7: ?
+ * bit6: ?
+ * bit5: ?
+ * bit4: ?
+ * bit3: ?
+ * bit2: ?
+ * bit1: ?
+ * bit0: mechanical card persence (dummy card is also detected)
+ * 0: card not present
+ * 1: card present
+ * ...
+ * BASE1+0xFFF: ?
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+
+MODULE_AUTHOR("Márton Németh <nm127@...email.hu>");
+MODULE_DESCRIPTION("Winbond 528SD Secure Digital (SD) card reader");
+MODULE_LICENSE("GPL");
+
+#define PCI_DEVICE_ID_WINBOND_528SD 0x8481
+
+#define WB528SD_REG_STATUS_51C 0x51C
+#define WB528SD_CARD_PRESENCE_MASK 0x01
+
+#define WB528SD_SIZE_4K 0x1000
+
+struct wb528sd_data {
+ void __iomem *ioaddr0;
+ void __iomem *ioaddr1;
+};
+
+static ssize_t card_present_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct wb528sd_data *data = dev_get_drvdata(dev);
+ unsigned int data51c;
+
+ data51c = ioread8(data->ioaddr1 + WB528SD_REG_STATUS_51C);
+
+ return snprintf(buf, PAGE_SIZE, "%u\n",
+ data51c & WB528SD_CARD_PRESENCE_MASK ? 1 : 0);
+}
+static DEVICE_ATTR(card_present, S_IRUGO, card_present_show, NULL);
+
+static irqreturn_t wb528sd_handler(int irq, void *dev_id)
+{
+#if 0
+ struct pci_dev *dev = dev_id;
+ struct wb528sd_data *data = pci_get_drvdata(dev);
+#endif
+ int ret = IRQ_NONE;
+
+ if (0) {
+ /* TODO: find out how to detect if wb528sd is the source
+ * of the interrupt. Note that the interrupt might be
+ * shared with other hardware devices.
+ */
+ ret = IRQ_HANDLED;
+ }
+
+ return ret;
+}
+
+#if 0
+static void dump_content(char *name, void __iomem *base, unsigned long length)
+{
+ unsigned int i;
+ unsigned int data;
+
+ for (i = 0; i < length; i += 4) {
+ data = ioread32(base + i);
+ printk(KERN_DEBUG "%s+0x%X: 0x%X\n", name, i, data);
+ }
+}
+#endif
+
+static int probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ unsigned long addr0_start, addr0_end, addr0_len, addr0_flags;
+ unsigned long addr1_start, addr1_end, addr1_len, addr1_flags;
+ void __iomem *ioaddr0;
+ void __iomem *ioaddr1;
+ int result;
+ u8 irq;
+ struct wb528sd_data *data = NULL;
+ int ret;
+
+ addr0_start = pci_resource_start(dev, 0);
+ addr0_end = pci_resource_end(dev, 0);
+ addr0_len = pci_resource_len(dev, 0);
+ addr0_flags = pci_resource_flags(dev, 0);
+ printk(KERN_DEBUG "Resource 0: 0x%lX..0x%lX, length=0x%lX, flags=0x%lX\n",
+ addr0_start, addr0_end, addr0_len, addr0_flags);
+
+ addr1_start = pci_resource_start(dev, 1);
+ addr1_end = pci_resource_end(dev, 1);
+ addr1_len = pci_resource_len(dev, 1);
+ addr1_flags = pci_resource_flags(dev, 1);
+ printk(KERN_DEBUG "Resource 1: 0x%lX..0x%lX, length=0x%lX, flags=0x%lX\n",
+ addr1_start, addr1_end, addr1_len, addr1_flags);
+
+ printk(KERN_DEBUG "dev->irq: IRQ #%u\n", dev->irq);
+
+ result = pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
+ if (!result)
+ printk(KERN_DEBUG "PCI_INTERRUPT_LINE: IRQ #%u\n", irq);
+ else
+ printk(KERN_DEBUG "Can't read PCI_INTERRUPT_LINE\n");
+
+ if (!(addr0_flags & IORESOURCE_MEM)) {
+ dev_err(&dev->dev, "region #0 not an MMIO resource, aborting\n");
+ return -ENODEV;
+ }
+ if (addr0_len != WB528SD_SIZE_4K) {
+ dev_err(&dev->dev, "Invalid PCI mem region size, aborting\n");
+ return -ENODEV;
+ }
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ dev_err(&dev->dev, "%s : kzalloc failed", __func__);
+ return -ENOMEM;
+ }
+
+ printk(KERN_DEBUG "pci_enable_device()\n");
+ result = pci_enable_device(dev);
+ if (result) {
+ printk(KERN_DEBUG "Error enabling wb528sd PCI device: %u\n",
+ result);
+ kfree(data);
+ return result;
+ }
+
+ printk(KERN_DEBUG "pci_request_regions()\n");
+ result = pci_request_regions(dev, KBUILD_MODNAME);
+ if (result) {
+ printk(KERN_DEBUG "pci_request_regions failed, error %d\n",
+ result);
+ pci_disable_device(dev);
+ kfree(data);
+ return result;
+ }
+
+ ioaddr0 = pci_iomap(dev, 0, 0);
+ if (!ioaddr0) {
+ printk(KERN_DEBUG "cannot remap MMIO #0\n");
+ pci_release_regions(dev);
+ pci_disable_device(dev);
+ kfree(data);
+ return result;
+ } else {
+ data->ioaddr0 = ioaddr0;
+ }
+
+ ioaddr1 = pci_iomap(dev, 1, 0);
+ if (!ioaddr1) {
+ printk(KERN_DEBUG "cannot remap MMIO #1\n");
+ pci_release_regions(dev);
+ pci_disable_device(dev);
+ kfree(data);
+ return result;
+ } else {
+ data->ioaddr1 = ioaddr1;
+ }
+
+ printk(KERN_DEBUG "request_irq()\n");
+ result = request_irq(dev->irq, wb528sd_handler,
+ IRQF_SHARED, KBUILD_MODNAME, dev);
+ if (result != 0) {
+ printk(KERN_DEBUG "Error requesting IRQ #%u device: %d\n",
+ dev->irq, result);
+ pci_release_regions(dev);
+ pci_disable_device(dev);
+ kfree(data);
+ return result;
+ }
+
+ /* TODO: enable wb528sd interrupt generation */
+
+ pci_set_drvdata(dev, data);
+
+ ret = device_create_file(&dev->dev, &dev_attr_card_present);
+ if (!ret)
+ ;
+
+ printk(KERN_DEBUG "done\n");
+
+ return 0;
+}
+
+static void remove(struct pci_dev *dev)
+{
+ struct wb528sd_data *data = pci_get_drvdata(dev);
+
+ printk(KERN_DEBUG "%s: remove\n", KBUILD_MODNAME);
+
+ device_remove_file(&dev->dev, &dev_attr_card_present);
+ pci_disable_device(dev);
+ pci_release_regions(dev);
+ if (data) {
+ pci_iounmap(dev, data->ioaddr0);
+ pci_iounmap(dev, data->ioaddr1);
+ }
+ free_irq(dev->irq, dev);
+
+}
+
+static DEFINE_PCI_DEVICE_TABLE(wb528sd_ids) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_WINBOND2, PCI_DEVICE_ID_WINBOND_528SD) },
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, wb528sd_ids);
+
+static struct pci_driver pci_driver = {
+ .name = "wb528sd",
+ .id_table = wb528sd_ids,
+ .probe = probe,
+ .remove = remove,
+};
+
+static int __init wb528sd_init(void)
+{
+ printk(KERN_DEBUG "%s: init\n", KBUILD_MODNAME);
+ return pci_register_driver(&pci_driver);
+}
+
+static void wb528sd_exit(void)
+{
+ printk(KERN_DEBUG "%s: exit\n", KBUILD_MODNAME);
+ pci_unregister_driver(&pci_driver);
+}
+
+module_init(wb528sd_init);
+module_exit(wb528sd_exit);
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists