| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1327508186-26704-3-git-send-email-keithp@keithp.com>
Date: Wed, 25 Jan 2012 08:16:26 -0800
From: Keith Packard <keithp@...thp.com>
To: intel-gfx@...ts.freedesktop.org
Cc: linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org,
Keith Packard <keithp@...thp.com>,
Lubos Kolouch <lubos.kolouch@...il.com>,
Adam Jackson <ajax@...hat.com>
Subject: [PATCH 2/2] drm/i915: Select DP BPC at mode set, rather than mode validate
The DP configuration must match the pipe configuration, and until mode
set we don't know what BPC will be used. Delay all decisions about BPC
until mode set, computing the target BPC in both intel_dp_mode_fixup
and either i9xx_crtc_mode_set or ironlake_crtc_mode_set. It might be
slightly better to compute this only once, but storing the value
between those two calls would be a pain.
Cc: Lubos Kolouch <lubos.kolouch@...il.com>
Cc: Adam Jackson <ajax@...hat.com>
Signed-off-by: Keith Packard <keithp@...thp.com>
---
drivers/gpu/drm/i915/intel_display.c | 27 +++++-------
drivers/gpu/drm/i915/intel_dp.c | 77 +++++++++++++++++++++++++++-------
drivers/gpu/drm/i915/intel_drv.h | 6 ++-
3 files changed, 78 insertions(+), 32 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index b3b51c4..d613676 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4850,9 +4850,9 @@ static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
* Dithering requirement (i.e. false if display bpc and pipe bpc match,
* true if they don't match).
*/
-static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
- unsigned int *pipe_bpp,
- struct drm_display_mode *mode)
+bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
+ unsigned int *pipe_bpp,
+ struct drm_display_mode *mode)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -4883,13 +4883,13 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
continue;
}
- if (intel_encoder->type == INTEL_OUTPUT_EDP) {
- /* Use VBT settings if we have an eDP panel */
- unsigned int edp_bpc = dev_priv->edp.bpp / 3;
+ if (intel_encoder->type == INTEL_OUTPUT_EDP ||
+ intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT) {
+ unsigned int dp_bpc = intel_dp_max_bpp(&intel_encoder->base, mode);
- if (edp_bpc < display_bpc) {
- DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
- display_bpc = edp_bpc;
+ if (dp_bpc < display_bpc) {
+ DRM_DEBUG_KMS("clamping display bpc (was %d) to DP (%d)\n", display_bpc, dp_bpc);
+ display_bpc = dp_bpc;
}
continue;
}
@@ -4923,11 +4923,6 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
}
}
- if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
- DRM_DEBUG_KMS("Dithering DP to 6bpc\n");
- display_bpc = 6;
- }
-
/*
* We could just drive the pipe at the highest bpc all the time and
* enable dithering as needed, but that costs bandwidth. So choose
@@ -4990,6 +4985,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
int ret;
u32 temp;
u32 lvds_sync = 0;
+ int dp_max_bpp = 0;
list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
if (encoder->base.crtc != crtc)
@@ -5016,6 +5012,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
break;
case INTEL_OUTPUT_DISPLAYPORT:
is_dp = true;
+ dp_max_bpp = intel_dp_max_bpp(&encoder->base, mode);
break;
}
@@ -5192,7 +5189,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
/* default to 8bpc */
pipeconf &= ~(PIPECONF_BPP_MASK | PIPECONF_DITHER_EN);
if (is_dp) {
- if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
+ if (dp_max_bpp <= 18) {
pipeconf |= PIPECONF_BPP_6 |
PIPECONF_DITHER_EN |
PIPECONF_DITHER_TYPE_SP;
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 94f860c..2482796 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -219,14 +219,51 @@ intel_dp_max_data_rate(int max_link_clock, int max_lanes)
return (max_link_clock * max_lanes * 8) / 10;
}
+/*
+ * For the specified encoder, return the maximum bpp that can be used
+ * for the specified mode.
+ */
+
+static const int dp_supported_bpc[] = { 6, 8, 10, 12, 16 };
+
+#define NUM_DP_SUPPORTED_BPC (sizeof dp_supported_bpc/sizeof dp_supported_bpc[0])
+
+int
+intel_dp_max_bpp(struct drm_encoder *encoder, struct drm_display_mode *mode)
+{
+ struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+ int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp));
+ int max_lanes = intel_dp_max_lane_count(intel_dp);
+ int max_rate, mode_rate;
+ int i;
+
+ max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes);
+ for (i = NUM_DP_SUPPORTED_BPC - 1; i >= 0; i--) {
+ int bpp = dp_supported_bpc[i] * 3; /* 3 channels of data (RGB) */
+
+ mode_rate = intel_dp_link_required(mode->clock, bpp);
+ if (mode_rate <= max_rate) {
+
+ /* Limit EDP bpp to panel ability */
+ if (intel_dp->base.type == INTEL_OUTPUT_EDP) {
+ struct drm_device *dev = encoder->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int edp_bpp = dev_priv->edp.bpp;
+
+ if (bpp > edp_bpp)
+ bpp = edp_bpp;
+ }
+ return bpp;
+ }
+ }
+ return 0;
+}
+
static int
intel_dp_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct intel_dp *intel_dp = intel_attached_dp(connector);
- int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp));
- int max_lanes = intel_dp_max_lane_count(intel_dp);
- int max_rate, mode_rate;
if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) {
if (mode->hdisplay > intel_dp->panel_fixed_mode->hdisplay)
@@ -236,16 +273,8 @@ intel_dp_mode_valid(struct drm_connector *connector,
return MODE_PANEL;
}
- mode_rate = intel_dp_link_required(mode->clock, 24);
- max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes);
-
- if (mode_rate > max_rate) {
- mode_rate = intel_dp_link_required(mode->clock, 18);
- if (mode_rate > max_rate)
- return MODE_CLOCK_HIGH;
- else
- mode->private_flags |= INTEL_MODE_DP_FORCE_6BPC;
- }
+ if (intel_dp_max_bpp(&intel_dp->base.base, mode) == 0)
+ return MODE_CLOCK_HIGH;
if (mode->clock < 10000)
return MODE_CLOCK_LOW;
@@ -673,9 +702,26 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
int lane_count, clock;
int max_lane_count = intel_dp_max_lane_count(intel_dp);
int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 : 0;
- int bpp = mode->private_flags & INTEL_MODE_DP_FORCE_6BPC ? 18 : 24;
+ unsigned int bpp;
static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
+ if (HAS_PCH_SPLIT(dev))
+ (void) intel_choose_pipe_bpp_dither(intel_dp->base.base.crtc, &bpp, mode);
+ else {
+ bpp = intel_dp_max_bpp(encoder, mode);
+ if (bpp > 24)
+ bpp = 24;
+ }
+
+ DRM_DEBUG_KMS("encoder assuming bpp %d (bpc %d)\n",
+ bpp, bpp / 3);
+
+ if (bpp == 0) {
+ DRM_DEBUG_KMS("Display port cannot support requested clock %d\n",
+ mode->clock);
+ return false;
+ }
+
if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) {
intel_fixed_panel_mode(intel_dp->panel_fixed_mode, adjusted_mode);
intel_pch_panel_fitting(dev, DRM_MODE_SCALE_FULLSCREEN,
@@ -691,8 +737,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
for (clock = 0; clock <= max_clock; clock++) {
int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
- if (intel_dp_link_required(mode->clock, bpp)
- <= link_avail) {
+ if (intel_dp_link_required(mode->clock, bpp) <= link_avail) {
intel_dp->link_bw = bws[clock];
intel_dp->lane_count = lane_count;
adjusted_mode->clock = intel_dp_link_clock(intel_dp->link_bw);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 1348705..03b4595 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -104,7 +104,6 @@
/* drm_display_mode->private_flags */
#define INTEL_MODE_PIXEL_MULTIPLIER_SHIFT (0x0)
#define INTEL_MODE_PIXEL_MULTIPLIER_MASK (0xf << INTEL_MODE_PIXEL_MULTIPLIER_SHIFT)
-#define INTEL_MODE_DP_FORCE_6BPC (0x10)
static inline void
intel_mode_set_pixel_multiplier(struct drm_display_mode *mode,
@@ -303,11 +302,16 @@ extern void intel_dp_init(struct drm_device *dev, int dp_reg);
void
intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
+extern int intel_dp_max_bpp(struct drm_encoder *encoder, struct drm_display_mode *mode);
extern bool intel_dpd_is_edp(struct drm_device *dev);
extern void intel_edp_link_config(struct intel_encoder *, int *, int *);
extern bool intel_encoder_is_pch_edp(struct drm_encoder *encoder);
extern int intel_plane_init(struct drm_device *dev, enum pipe pipe);
+bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
+ unsigned int *pipe_bpp,
+ struct drm_display_mode *mode);
+
/* intel_panel.c */
extern void intel_fixed_panel_mode(struct drm_display_mode *fixed_mode,
struct drm_display_mode *adjusted_mode);
--
1.7.8.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists