lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <804857E1F29AAC47BF68C404FC60A1842437C3@ORSMSX102.amr.corp.intel.com>
Date:	Wed, 25 Jan 2012 17:00:29 +0000
From:	"Allan, Bruce W" <bruce.w.allan@...el.com>
To:	Andy Isaacson <adi@...apodia.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
	"e1000-devel@...ts.sourceforge.net" 
	<e1000-devel@...ts.sourceforge.net>
Subject: RE: e1000e: repeated eth0: Error reading PHY register

>-----Original Message-----
>From: linux-kernel-owner@...r.kernel.org [mailto:linux-kernel-
>owner@...r.kernel.org] On Behalf Of Andy Isaacson
>Sent: Wednesday, January 25, 2012 1:21 AM
>To: linux-kernel@...r.kernel.org; netdev@...r.kernel.org; e1000-
>devel@...ts.sourceforge.net
>Subject: e1000e: repeated eth0: Error reading PHY register
>
>On my Thinkpad X201s running 3.3-rc1 I'm seeing bursts of these:
>
>[ 1270.207370] e1000e 0000:00:19.0: eth0: Error reading PHY register
>[ 1271.003042] e1000e 0000:00:19.0: eth0: Error reading PHY register
>[ 1271.798896] e1000e 0000:00:19.0: eth0: Error reading PHY register
>[ 1272.595324] e1000e 0000:00:19.0: eth0: Error reading PHY register
>
>I've been seeing these messages for a few kernel versions, but
>unfortunately due to a hardware failure I don't have kernels further
>back than 3.0.  I'm pretty sure this didn't happen on 2.6.38.
>
>There are nearly always exactly 12 messages (I have one log sequence
>where there are only 5, out of 110 occurrences), and they come every 300
>seconds during some period, then they go away for a long time, then come
>back with no clear cause.
>
>% dmesg | grep PHY | uniq -w4 -c
> 25 [    1.253783] e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: A002FF-
>0FF
> 12 [  370.314165] e1000e 0000:00:19.0: eth0: Error reading PHY register
> 12 [  670.201544] e1000e 0000:00:19.0: eth0: Error reading PHY register
> 12 [  970.045374] e1000e 0000:00:19.0: eth0: Error reading PHY register
> 12 [ 1270.207370] e1000e 0000:00:19.0: eth0: Error reading PHY register
> 12 [ 1570.031407] e1000e 0000:00:19.0: eth0: Error reading PHY register
>
>(the clock is currently at 3636.)
>
>The machine is on and off of AC power, and suspended with "sudo
>pm-suspend" then resumed, on a regular basis; there doesn't seem to be
>any clear correlation.
>
>There's nothing plugged into the ethernet jack when this happens.  (I
>don't use wired ethernet often enough to be sure if it happens when the
>wire is connected; there doesn't seem to be any impact on
>functionality on the rare occasion I do use it.)
>
>% sudo ethtool eth0
>Settings for eth0:
>        Supported ports: [ TP ]
>        Supported link modes:   10baseT/Half 10baseT/Full
>                                100baseT/Half 100baseT/Full
>                                1000baseT/Full
>        Supported pause frame use: No
>        Supports auto-negotiation: Yes
>        Advertised link modes:  10baseT/Half 10baseT/Full
>                                100baseT/Half 100baseT/Full
>                                1000baseT/Full
>        Advertised pause frame use: No
>        Advertised auto-negotiation: Yes
>        Speed: Unknown!
>        Duplex: Unknown! (255)
>        Port: Twisted Pair
>        PHYAD: 2
>        Transceiver: internal
>        Auto-negotiation: on
>        MDI-X: Unknown
>        Supports Wake-on: pumbg
>        Wake-on: d
>        Current message level: 0x00000001 (1)
>                               drv
>        Link detected: no
>
>% sudo lspci -vvvs 0:19
>00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network
>Connection (rev 06)
>        Subsystem: Lenovo Device 2153
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>Stepping- SERR+ FastB2B- DisINTx+
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
><MAbort- >SERR- <PERR- INTx-
>        Latency: 0
>        Interrupt: pin A routed to IRQ 40
>        Region 0: Memory at f2500000 (32-bit, non-prefetchable) [size=128K]
>        Region 1: Memory at f2525000 (32-bit, non-prefetchable) [size=4K]
>        Region 2: I/O ports at 1820 [size=32]
>        Capabilities: [c8] Power Management version 2
>                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-
>,D3hot+,D3cold+)
>                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
>        Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
>                Address: 00000000fee0f00c  Data: 4149
>        Capabilities: [e0] PCI Advanced Features
>                AFCap: TP+ FLR+
>                AFCtrl: FLR-
>                AFStatus: TP-
>        Kernel driver in use: e1000e
>
>
>Full dmesg at http://web.hexapodia.org/~adi/snow/dmesg-3.3.0-rc1
>
>Thanks,
>-andy

Please file a bug with this information at
http://sourceforge.net/tracker/?group_id=42302&atid=447449

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ