| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20120223124147.GL18463@legolas.emea.dhcp.ti.com>
Date: Thu, 23 Feb 2012 14:41:48 +0200
From: Felipe Balbi <balbi@...com>
To: Sarah Sharp <sarah.a.sharp@...ux.intel.com>
Cc: Alex Shi <alex.shi@...el.com>, Felipe Balbi <balbi@...com>,
gregkh@...uxfoundation.org, stern@...land.harvard.edu,
linux-usb@...r.kernel.org, andiry.xu@....com, clemens@...isch.de,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/3] usb: enable pci MSI/MSIX in usb core
Hi,
On Wed, Feb 22, 2012 at 07:41:47PM -0800, Sarah Sharp wrote:
> On Mon, Feb 20, 2012 at 05:05:32PM +0800, Alex Shi wrote:
> > MSI/MSIX is the favorite interrupt for PCIe device. PCIe usb HCD should
> > be used more and more in future, but current USB core still just wants
> > line IRQ, only XHCI usb driver enabled MSI/MSIX.
> >
> > This patch enabled pci MSI/MSIX in usb core for HCD, and removed MSI/MSIX
> > setup code from XHCI since it becomes redundant now.
> > There 3 places need prepare to enable MSI/MSIX in usb driver.
> > 1, set HCD_MSI_FIRST in driver->flags to enable MSI/MSIX.
> > 2, prepare a get_msix_num() to get msix vector numb.
> > 3, prepare msi/msix_irq handler if needed.
> >
> > XHCI is a good example for this.
> >
> > Thanks for Sarah's effort on the MSI/MSIX enabling in XHCI. In fact most
> > of MSI/MSIX setup functions reuse from XHCI.
>
> Comments below.
>
> Felipe, can you please review this patch for the effects on non-PCI
> hosts? I think nothing will change, since this patchset just modifies
> the USB core PCI initialization flow, but I need your eyes on this. :)
Sure thing :-)
> > Signed-off-by: Alex Shi <alex.shi@...el.com>
> > ---
> > drivers/usb/core/hcd-pci.c | 223 ++++++++++++++++++++++++++++++++++++++++++-
> > drivers/usb/core/hcd.c | 22 ++++-
> > drivers/usb/host/xhci-pci.c | 16 ++--
> > drivers/usb/host/xhci.c | 216 +++---------------------------------------
> > drivers/usb/host/xhci.h | 5 +-
> > include/linux/usb/hcd.h | 17 ++++
> > 6 files changed, 276 insertions(+), 223 deletions(-)
> >
> > diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
> > index 81e2c0d..8475b25 100644
> > --- a/drivers/usb/core/hcd-pci.c
> > +++ b/drivers/usb/core/hcd-pci.c
> > @@ -153,6 +153,218 @@ static inline void wait_for_companions(struct pci_dev *d, struct usb_hcd *h) {}
> >
> > /*-------------------------------------------------------------------------*/
> >
> > +static int hcd_free_msix(struct usb_hcd *hcd)
> > +{
> > + int i;
> > + struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
> > +
> > + if (!hcd->msix_entries) {
> > + printk(KERN_ERR "No msix entries found!\n");
> > + return -EINVAL;
> > + }
> > + for (i = 0; i < hcd->msix_count; i++)
> > + if (hcd->msix_entries[i].vector)
> > + free_irq(hcd->msix_entries[i].vector,
> > + hcd);
> > +
> > + pci_disable_msix(pdev);
> > + kfree(hcd->msix_entries);
> > + hcd->msix_entries = NULL;
> > + hcd->msix_enabled = 0;
> > +
> > + return 0;
> > +}
> > +
> > +static int hcd_free_msi(struct usb_hcd *hcd)
> > +{
> > + struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
> > +
> > + if (pdev->irq > 0 && hcd->irq <0)
> > + free_irq(pdev->irq, hcd);
> > +
> > + pci_disable_msi(pdev);
> > + return 0;
> > +}
> > +
> > +/* Free and disable msi/msix */
> > +void usb_hcd_free_msi_msix(struct usb_hcd *hcd)
> > +{
> > + if (hcd->msix_entries)
> > + hcd_free_msix(hcd);
> > + else
> > + hcd_free_msi(hcd);
> > +
> > + return;
> > +}
> > +EXPORT_SYMBOL_GPL(usb_hcd_free_msi_msix);
> > +
> > +void usb_hcd_msix_sync_irqs(struct usb_hcd *hcd)
> > +{
> > + int i;
> > + if (hcd->msix_entries) {
> > + for (i = 0; i < hcd->msix_count; i++)
> > + synchronize_irq(hcd->msix_entries[i].vector);
> > + }
> > +
> > +}
> > +EXPORT_SYMBOL_GPL(usb_hcd_msix_sync_irqs);
> > +
> > +/*
> > + * Set up MSI
> > + */
> > +static int hcd_setup_msi(struct pci_dev *pdev, struct usb_hcd *hcd)
> > +{
> > + int ret;
> > +
> > + ret = pci_enable_msi(pdev);
> > + if (ret)
> > + dev_dbg(&pdev->dev, "failed to allocate MSI entry\n");
> > + return ret;
> > +}
> > +
> > +/*
> > + * Set up MSI-X
> > + */
> > +static int hcd_setup_msix(struct pci_dev *pdev, struct usb_hcd *hcd)
> > +{
> > + int i, ret = 0;
> > +
> > + /*
> > + * calculate number of msi-x vectors supported.
> > + * Add additional 1 vector to ensure always available interrupt.
> > + */
> > + hcd->msix_count = min((int)num_online_cpus() + 1,
> > + hcd->driver->get_msix_num(hcd));
> > +
> > + hcd->msix_entries =
> > + kmalloc((sizeof(struct msix_entry))*hcd->msix_count,
> > + GFP_KERNEL);
> > + if (!hcd->msix_entries) {
> > + dev_err(&pdev->dev, "Failed to allocate MSI-X entries\n");
> > + hcd->msix_count = 0;
> > + return -ENOMEM;
> > + }
> > +
> > + for (i = 0; i < hcd->msix_count; i++) {
> > + hcd->msix_entries[i].entry = i;
> > + hcd->msix_entries[i].vector = 0;
> > + }
> > +
> > + ret = pci_enable_msix(pdev, hcd->msix_entries, hcd->msix_count);
> > + if (ret) {
> > + dev_dbg(&pdev->dev, "Failed to enable MSI-X\n");
> > + goto free_entries;
> > + }
> > +
> > + return ret;
> > +
> > +free_entries:
> > + kfree(hcd->msix_entries);
> > + hcd->msix_entries = NULL;
> > + hcd->msix_count = 0;
> > + return ret;
> > +}
> > +
> > +/* Device for a quirk */
> > +#define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73
> > +#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000
>
> This PCI device and vendor ID is now used in two drivers (xhci and USB
> core). Please create a separate patch to add this ID to the pci_ids.h
> file, and remove the reference here and in the xHCI driver.
Yeah, makes sense
> > +/* Check for buggy HCD devices, and driver's expectation for MSI.
please use the preferred multi-line comment style.
> > + * Now, only xhci driver want it by HCD_MSI_FIRST setting. Other driver
> > + * like ehci/uhci can follow this setting, if they want.
> > + */
> > +static int hcd_no_msi(struct pci_dev *pdev, struct usb_hcd *hcd)
> > +{
> > + if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
> > + pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) {
> > +
> > + /* Fresco Logic confirms: all revisions of this chip do not
> > + * support MSI, even though some of them claim to in their PCI
> > + * capabilities.
> > + */
> > + dev_dbg(&pdev->dev, "QUIRK: Fresco Logic revision %u "
> > + "has broken MSI implementation\n",
> > + pdev->revision);
> > + return 1;
> > + }
> > + if (!(hcd->driver->flags & HCD_MSI_FIRST))
> > + return 1;
> > +
> > + return 0;
> > +}
> > +
> > +/* setup msi/msix interrupts. if fails, fallback to line irq */
> > +static int hcd_setup_int(struct pci_dev *pdev, struct usb_hcd *hcd)
> > +{
> > + int ret;
> > +
> > + hcd->irq = -1;
> > +
> > + if (!hcd_no_msi(pdev, hcd)) {
>
> Why don't you rename hcd_no_msi() to hcd_supports_msi() and remove the
> negation of the return value?
I agree.
> > + ret = hcd_setup_msix(pdev, hcd);
> > + if (ret)
> > + /* fall back to msi*/
> > + ret = hcd_setup_msi(pdev, hcd);
> > +
> > + if (!ret)
> > + /* hcd->irq is -1, we have MSI */
> > + return 0;
> > + }
> > +
> > + if (!pdev->irq) {
> > + dev_err(&pdev->dev, "No msi or line irq found!\n");
> > + return -1;
> > + }
> > + /* fallback to line irq */
> > + hcd->irq = pdev->irq;
> > + return 0;
> > +}
> > +
> > +int usb_hcd_request_msi_msix_irqs(struct usb_hcd *hcd, unsigned int irqnum,
> > + unsigned long irqflags)
> > +{
> > + int retval = 1;
> > + if (hcd->msix_entries && hcd->driver->msix_irq) {
> > + int i;
> > + /* register hc_driver's msix_irq handler */
> > + for (i = 0; i < hcd->msix_count; i++) {
> > + retval = request_irq(hcd->msix_entries[i].vector,
> > + (irq_handler_t)hcd->driver->msix_irq,
do you really need this cast here ?
> > + 0, hcd->driver->description, hcd);
>
> I really think you need to allow the host controller driver to set
> different pointers for the msix data pointer. It's something that we
> need to figure out, so that we can have the infrastructure in place for
> multiple event rings.
>
> I'm not sure whether the new get MSIX count needs to allow the xHCI
> driver to return an array of pointers, or if the driver can modify the
> irq pointer later? I don't think you can modify the irq data pointer
> after it's been requested (that would lead to all kinds of race
> conditions, I think).
>
> It's probably better to allow the xHCI driver to pass this function the
> pointers it needs for each MSI-X vector. You'll always call
> usb_hcd_request_msi_msix_irqs() after you call xhci_init(), correct? At
> that point, we should have allocated the multiple event rings, so it
> should be easy to pass the pointers to this function.
>
> > + if (retval) {
> > + hcd_free_msix(hcd);
> > + break;
> > + }
> > + }
> > + if (i == hcd->msix_count)
> > + hcd->msix_enabled = 1;
> > + } else if (hcd->irq == -1 && hcd->driver->msi_irq) {
> > + /* register hc_driver's msi_irq handler */
> > + retval = request_irq(irqnum,
> > + (irq_handler_t)hcd->driver->msi_irq,
> > + 0, hcd->driver->description, hcd);
> > + if (retval)
> > + hcd_free_msi(hcd);
> > + }
> > +
> > + return retval;
> > +}
> > +EXPORT_SYMBOL_GPL(usb_hcd_request_msi_msix_irqs);
> > +
> > +/* setup msi/msix interrupts and requestion irqs for them */
> > +int usb_hcd_register_msi_msix_irqs(struct usb_hcd *hcd)
> > +{
> > + struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
> > + int ret = -1;
> > +
> > + if (!hcd_setup_int(pdev, hcd))
> > + ret = usb_hcd_request_msi_msix_irqs(hcd,
> > + pdev->irq, IRQF_SHARED);
> > + return ret;
> > +}
> > +EXPORT_SYMBOL_GPL(usb_hcd_register_msi_msix_irqs);
> > +
> > /* configure so an HC device and id are always provided */
> > /* always called with process context; sleeping is OK */
> >
> > @@ -187,10 +399,8 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
> > return -ENODEV;
> > dev->current_state = PCI_D0;
> >
> > - /* The xHCI driver supports MSI and MSI-X,
> > - * so don't fail if the BIOS doesn't provide a legacy IRQ.
> > - */
> > - if (!dev->irq && (driver->flags & HCD_MASK) != HCD_USB3) {
> > + /* skip irq check if hcd wants MSI firstly. */
> > + if (!(driver->flags & HCD_MSI_FIRST) && !dev->irq) {
> > dev_err(&dev->dev,
> > "Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
> > pci_name(dev));
> > @@ -245,6 +455,11 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
> >
> > pci_set_master(dev);
> >
> > + /* try enable MSI, if fail, seek line irq */
> > + retval = hcd_setup_int(dev, hcd);
> > + if (retval != 0)
> > + goto unmap_registers;
> > +
> > retval = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
> > if (retval != 0)
> > goto unmap_registers;
> > diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
> > index e128232..579cbd3 100644
> > --- a/drivers/usb/core/hcd.c
> > +++ b/drivers/usb/core/hcd.c
> > @@ -2322,7 +2322,7 @@ int usb_hcd_is_primary_hcd(struct usb_hcd *hcd)
> > }
> > EXPORT_SYMBOL_GPL(usb_hcd_is_primary_hcd);
> >
> > -static int usb_hcd_request_irqs(struct usb_hcd *hcd,
> > +static int usb_hcd_request_default_irqs(struct usb_hcd *hcd,
> > unsigned int irqnum, unsigned long irqflags)
> > {
> > int retval;
> > @@ -2362,6 +2362,20 @@ static int usb_hcd_request_irqs(struct usb_hcd *hcd,
> > return 0;
> > }
> >
> > +int usb_hcd_request_irqs(struct usb_hcd *hcd, unsigned int irqnum,
> > + unsigned long irqflags)
> > +{
> > + int retval = 1;
> > +
> > +#ifdef CONFIG_PCI
> > + retval = usb_hcd_request_msi_msix_irqs(hcd, irqnum, irqflags);
> > +#endif
I would like it better if the #ifdef is in the function body, something
like:
int usb_hcd_request_msi_msix_irqs(struct hcd *hcd, int irqnum, int irqflags)
{
#ifdef CONFIG_PCI
/* blablabla */
#else
return -ENODEV;
#endif
}
> > @@ -2447,10 +2461,8 @@ int usb_add_hcd(struct usb_hcd *hcd,
> > && device_can_wakeup(&hcd->self.root_hub->dev))
> > dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
> >
> > - /* enable irqs just before we start the controller,
> > - * if the BIOS provides legacy PCI irqs.
> > - */
> > - if (usb_hcd_is_primary_hcd(hcd) && irqnum) {
> > + /* enable irqs just before we start the controller */
> > + if (usb_hcd_is_primary_hcd(hcd)) {
> > retval = usb_hcd_request_irqs(hcd, irqnum, irqflags);
> > if (retval)
> > goto err_request_irq;
> > diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
> > index ef98b38..39be795 100644
> > --- a/drivers/usb/host/xhci-pci.c
> > +++ b/drivers/usb/host/xhci-pci.c
> > @@ -64,14 +64,6 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
> > xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
> > " endpoint cmd after reset endpoint\n");
> > }
> > - /* Fresco Logic confirms: all revisions of this chip do not
> > - * support MSI, even though some of them claim to in their PCI
> > - * capabilities.
> > - */
> > - xhci->quirks |= XHCI_BROKEN_MSI;
> > - xhci_dbg(xhci, "QUIRK: Fresco Logic revision %u "
> > - "has broken MSI implementation\n",
> > - pdev->revision);
> > }
> >
> > if (pdev->vendor == PCI_VENDOR_ID_NEC)
> > @@ -124,6 +116,7 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
> > return retval;
> > }
> >
> > +
>
> Don't add spaces here.
>
> > /*
> > * We need to register our own PCI probe function (instead of the USB core's
> > * function) in order to create a second roothub under xHCI.
> > @@ -136,6 +129,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
> > struct usb_hcd *hcd;
> >
> > driver = (struct hc_driver *)id->driver_data;
> > +
>
> Or here.
>
> > /* Register the USB 2.0 roothub.
> > * FIXME: USB core must know to register the USB 2.0 roothub first.
> > * This is sort of silly, because we could just set the HCD driver flags
> > @@ -243,13 +237,17 @@ static const struct hc_driver xhci_pci_hc_driver = {
> > * generic hardware linkage
> > */
> > .irq = xhci_irq,
> > - .flags = HCD_MEMORY | HCD_USB3 | HCD_SHARED,
> > + .msi_irq = xhci_msi_irq,
> > + .msix_irq = xhci_msi_irq,
> > + .flags = HCD_MEMORY | HCD_USB3 | HCD_SHARED |
> > + HCD_MSI_FIRST,
> >
> > /*
> > * basic lifecycle operations
> > */
> > .reset = xhci_pci_setup,
> > .start = xhci_run,
> > + .get_msix_num = xhci_get_msix_num,
> > #ifdef CONFIG_PM
> > .pci_suspend = xhci_pci_suspend,
> > .pci_resume = xhci_pci_resume,
> > diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> > index c939f5f..95dc48f 100644
> > --- a/drivers/usb/host/xhci.c
> > +++ b/drivers/usb/host/xhci.c
> > @@ -176,210 +176,24 @@ int xhci_reset(struct xhci_hcd *xhci)
> > }
> >
> > #ifdef CONFIG_PCI
> > -static int xhci_free_msi(struct xhci_hcd *xhci)
> > -{
> > - int i;
> > -
> > - if (!xhci->msix_entries)
> > - return -EINVAL;
> > -
> > - for (i = 0; i < xhci->msix_count; i++)
> > - if (xhci->msix_entries[i].vector)
> > - free_irq(xhci->msix_entries[i].vector,
> > - xhci_to_hcd(xhci));
> > - return 0;
> > -}
> > -
> > -/*
> > - * Set up MSI
> > - */
> > -static int xhci_setup_msi(struct xhci_hcd *xhci)
> > -{
> > - int ret;
> > - struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
> > -
> > - ret = pci_enable_msi(pdev);
> > - if (ret) {
> > - xhci_dbg(xhci, "failed to allocate MSI entry\n");
> > - return ret;
> > - }
> > -
> > - ret = request_irq(pdev->irq, (irq_handler_t)xhci_msi_irq,
> > - 0, "xhci_hcd", xhci_to_hcd(xhci));
> > - if (ret) {
> > - xhci_dbg(xhci, "disable MSI interrupt\n");
> > - pci_disable_msi(pdev);
> > - }
> > -
> > - return ret;
> > -}
> > -
> > -/*
> > - * Free IRQs
> > - * free all IRQs request
> > - */
> > -static void xhci_free_irq(struct xhci_hcd *xhci)
> > -{
> > - struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
> > - int ret;
> > -
> > - /* return if using legacy interrupt */
> > - if (xhci_to_hcd(xhci)->irq >= 0)
> > - return;
> > -
> > - ret = xhci_free_msi(xhci);
> > - if (!ret)
> > - return;
> > - if (pdev->irq >= 0)
> > - free_irq(pdev->irq, xhci_to_hcd(xhci));
> > -
> > - return;
> > -}
> > -
> > -/*
> > - * Set up MSI-X
> > - */
> > -static int xhci_setup_msix(struct xhci_hcd *xhci)
> > -{
> > - int i, ret = 0;
> > - struct usb_hcd *hcd = xhci_to_hcd(xhci);
> > - struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
> > -
> > - /*
> > - * calculate number of msi-x vectors supported.
> > - * - HCS_MAX_INTRS: the max number of interrupts the host can handle,
> > - * with max number of interrupters based on the xhci HCSPARAMS1.
> > - * - num_online_cpus: maximum msi-x vectors per CPUs core.
> > - * Add additional 1 vector to ensure always available interrupt.
> > - */
> > - xhci->msix_count = min(num_online_cpus() + 1,
> > - HCS_MAX_INTRS(xhci->hcs_params1));
> > -
> > - xhci->msix_entries =
> > - kmalloc((sizeof(struct msix_entry))*xhci->msix_count,
> > - GFP_KERNEL);
> > - if (!xhci->msix_entries) {
> > - xhci_err(xhci, "Failed to allocate MSI-X entries\n");
> > - return -ENOMEM;
> > - }
> > -
> > - for (i = 0; i < xhci->msix_count; i++) {
> > - xhci->msix_entries[i].entry = i;
> > - xhci->msix_entries[i].vector = 0;
> > - }
> > -
> > - ret = pci_enable_msix(pdev, xhci->msix_entries, xhci->msix_count);
> > - if (ret) {
> > - xhci_dbg(xhci, "Failed to enable MSI-X\n");
> > - goto free_entries;
> > - }
> > -
> > - for (i = 0; i < xhci->msix_count; i++) {
> > - ret = request_irq(xhci->msix_entries[i].vector,
> > - (irq_handler_t)xhci_msi_irq,
> > - 0, "xhci_hcd", xhci_to_hcd(xhci));
> > - if (ret)
> > - goto disable_msix;
> > - }
> > -
> > - hcd->msix_enabled = 1;
> > - return ret;
> > -
> > -disable_msix:
> > - xhci_dbg(xhci, "disable MSI-X interrupt\n");
> > - xhci_free_irq(xhci);
> > - pci_disable_msix(pdev);
> > -free_entries:
> > - kfree(xhci->msix_entries);
> > - xhci->msix_entries = NULL;
> > - return ret;
> > -}
> > -
> > -/* Free any IRQs and disable MSI-X */
> > -static void xhci_cleanup_msix(struct xhci_hcd *xhci)
> > -{
> > - struct usb_hcd *hcd = xhci_to_hcd(xhci);
> > - struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
> > -
> > - xhci_free_irq(xhci);
> > -
> > - if (xhci->msix_entries) {
> > - pci_disable_msix(pdev);
> > - kfree(xhci->msix_entries);
> > - xhci->msix_entries = NULL;
> > - } else {
> > - pci_disable_msi(pdev);
> > - }
> > -
> > - hcd->msix_enabled = 0;
> > - return;
> > -}
> >
> > static void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
> > {
> > - int i;
> > -
> > - if (xhci->msix_entries) {
> > - for (i = 0; i < xhci->msix_count; i++)
> > - synchronize_irq(xhci->msix_entries[i].vector);
> > - }
> > + usb_hcd_msix_sync_irqs(xhci_to_hcd(xhci));
> > }
> >
> > -static int xhci_try_enable_msi(struct usb_hcd *hcd)
> > +/* called in interrupt setup during pci probe() */
> > +int xhci_get_msix_num(struct usb_hcd *hcd)
> > {
> > struct xhci_hcd *xhci = hcd_to_xhci(hcd);
> > - struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
> > - int ret;
> > -
> > - /*
> > - * Some Fresco Logic host controllers advertise MSI, but fail to
> > - * generate interrupts. Don't even try to enable MSI.
> > - */
> > - if (xhci->quirks & XHCI_BROKEN_MSI)
> > - return 0;
> > -
> > - /* unregister the legacy interrupt */
> > - if (hcd->irq)
> > - free_irq(hcd->irq, hcd);
> > - hcd->irq = -1;
> >
> > - ret = xhci_setup_msix(xhci);
> > - if (ret)
> > - /* fall back to msi*/
> > - ret = xhci_setup_msi(xhci);
> > -
> > - if (!ret)
> > - /* hcd->irq is -1, we have MSI */
> > - return 0;
> > -
> > - if (!pdev->irq) {
> > - xhci_err(xhci, "No msi-x/msi found and no IRQ in BIOS\n");
> > - return -EINVAL;
> > - }
> > -
> > - /* fall back to legacy interrupt*/
> > - ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
> > - hcd->irq_descr, hcd);
> > - if (ret) {
> > - xhci_err(xhci, "request interrupt %d failed\n",
> > - pdev->irq);
> > - return ret;
> > - }
> > - hcd->irq = pdev->irq;
> > - return 0;
> > + /* danger: xhci may be null, but it's useless in xhci_readl() now */
> > + return HCS_MAX_INTRS(xhci_readl(xhci,
> > + &((struct xhci_cap_regs *)hcd->regs)->hcs_params1));
> > }
> >
> > #else
> >
> > -static int xhci_try_enable_msi(struct usb_hcd *hcd)
> > -{
> > - return 0;
> > -}
> > -
> > -static void xhci_cleanup_msix(struct xhci_hcd *xhci)
> > -{
> > -}
> > -
> > static void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
> > {
> > }
> > @@ -411,7 +225,6 @@ int xhci_init(struct usb_hcd *hcd)
> >
> > return retval;
> > }
> > -
> > /*-------------------------------------------------------------------------*/
> >
> >
> > @@ -497,7 +310,6 @@ int xhci_run(struct usb_hcd *hcd)
> > {
> > u32 temp;
> > u64 temp_64;
> > - int ret;
> > struct xhci_hcd *xhci = hcd_to_xhci(hcd);
> >
> > /* Start the xHCI host controller running only after the USB 2.0 roothub
> > @@ -510,10 +322,6 @@ int xhci_run(struct usb_hcd *hcd)
> >
> > xhci_dbg(xhci, "xhci_run\n");
> >
> > - ret = xhci_try_enable_msi(hcd);
> > - if (ret)
> > - return ret;
> > -
> > #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
> > init_timer(&xhci->event_ring_timer);
> > xhci->event_ring_timer.data = (unsigned long) xhci;
> > @@ -609,7 +417,7 @@ void xhci_stop(struct usb_hcd *hcd)
> > xhci_reset(xhci);
> > spin_unlock_irq(&xhci->lock);
> >
> > - xhci_cleanup_msix(xhci);
> > + usb_hcd_free_msi_msix(hcd);
> >
> > #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
> > /* Tell the event ring poll function not to reschedule */
> > @@ -651,7 +459,7 @@ void xhci_shutdown(struct usb_hcd *hcd)
> > xhci_halt(xhci);
> > spin_unlock_irq(&xhci->lock);
> >
> > - xhci_cleanup_msix(xhci);
> > + usb_hcd_free_msi_msix(hcd);
> >
> > xhci_dbg(xhci, "xhci_shutdown completed - status = %x\n",
> > xhci_readl(xhci, &xhci->op_regs->status));
> > @@ -853,7 +661,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
> > xhci_halt(xhci);
> > xhci_reset(xhci);
> > spin_unlock_irq(&xhci->lock);
> > - xhci_cleanup_msix(xhci);
> > + usb_hcd_free_msi_msix(hcd);
> >
> > #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
> > /* Tell the event ring poll function not to reschedule */
> > @@ -888,7 +696,11 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
> > if (retval)
> > return retval;
> > xhci_dbg(xhci, "Start the primary HCD\n");
> > - retval = xhci_run(hcd->primary_hcd);
> > + if (dev_is_pci(hcd->self.controller))
> > + retval = usb_hcd_register_msi_msix_irqs(
> > + hcd->primary_hcd);
>
> Why not change this function to take a count of msix vectors and
> pointers for data? Then you don't need the new usb_hcd driver method
> for getting the msix count.
>
> > + if (!retval)
> > + retval = xhci_run(hcd->primary_hcd);
> > if (!retval) {
> > xhci_dbg(xhci, "Start the secondary HCD\n");
> > retval = xhci_run(secondary_hcd);
> > diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
> > index fb99c83..8d511dd 100644
> > --- a/drivers/usb/host/xhci.h
> > +++ b/drivers/usb/host/xhci.h
> > @@ -1388,9 +1388,6 @@ struct xhci_hcd {
> > int page_size;
> > /* Valid values are 12 to 20, inclusive */
> > int page_shift;
> > - /* msi-x vectors */
> > - int msix_count;
> > - struct msix_entry *msix_entries;
> > /* data structures */
> > struct xhci_device_context_array *dcbaa;
> > struct xhci_ring *cmd_ring;
> > @@ -1643,9 +1640,11 @@ void xhci_free_command(struct xhci_hcd *xhci,
> > /* xHCI PCI glue */
> > int xhci_register_pci(void);
> > void xhci_unregister_pci(void);
> > +int xhci_get_msix_num(struct usb_hcd *hcd);
> > #else
> > static inline int xhci_register_pci(void) { return 0; }
> > static inline void xhci_unregister_pci(void) {}
> > +static inline int xhci_get_msix_num(struct usb_hcd *hcd) { return 0; }
> > #endif
> >
> > /* xHCI host controller glue */
> > diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
> > index b2f62f3..5253c02 100644
> > --- a/include/linux/usb/hcd.h
> > +++ b/include/linux/usb/hcd.h
> > @@ -22,6 +22,7 @@
> > #ifdef __KERNEL__
> >
> > #include <linux/rwsem.h>
> > +#include <linux/pci.h> /* for struct msix_entry */
> >
> > #define MAX_TOPO_LEVEL 6
> >
> > @@ -133,6 +134,12 @@ struct usb_hcd {
> > u64 rsrc_len; /* memory/io resource length */
> > unsigned power_budget; /* in mA, 0 = no limit */
> >
> > +#ifdef CONFIG_PCI
> > + /* msi-x vectors */
> > + int msix_count;
> > + struct msix_entry *msix_entries;
> > +#endif
> > +
> > /* bandwidth_mutex should be taken before adding or removing
> > * any new bus bandwidth constraints:
> > * 1. Before adding a configuration for a new device.
> > @@ -205,11 +212,14 @@ struct hc_driver {
> >
> > /* irq handler */
> > irqreturn_t (*irq) (struct usb_hcd *hcd);
> > + irqreturn_t (*msi_irq) (int irq, struct usb_hcd *hcd);
> > + irqreturn_t (*msix_irq) (int irq, struct usb_hcd *hcd);
> >
> > int flags;
> > #define HCD_MEMORY 0x0001 /* HC regs use memory (else I/O) */
> > #define HCD_LOCAL_MEM 0x0002 /* HC needs local memory */
> > #define HCD_SHARED 0x0004 /* Two (or more) usb_hcds share HW */
> > +#define HCD_MSI_FIRST 0x0008 /* Try to get MSI first, PCI only */
> > #define HCD_USB11 0x0010 /* USB 1.1 */
> > #define HCD_USB2 0x0020 /* USB 2.0 */
> > #define HCD_USB3 0x0040 /* USB 3.0 */
> > @@ -218,6 +228,7 @@ struct hc_driver {
> > /* called to init HCD and root hub */
> > int (*reset) (struct usb_hcd *hcd);
> > int (*start) (struct usb_hcd *hcd);
> > + int (*get_msix_num) (struct usb_hcd *hcd);
> >
> > /* NOTE: these suspend/resume calls relate to the HC as
> > * a whole, not just the root hub; they're for PCI bus glue.
> > @@ -393,6 +404,12 @@ extern int usb_hcd_pci_probe(struct pci_dev *dev,
> > extern void usb_hcd_pci_remove(struct pci_dev *dev);
> > extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
> >
> > +extern void usb_hcd_free_msi_msix(struct usb_hcd *hcd);
> > +extern void usb_hcd_msix_sync_irqs(struct usb_hcd *hcd);
> > +extern int usb_hcd_request_msi_msix_irqs(struct usb_hcd *hcd,
> > + unsigned int irqnum, unsigned long irqflags);
> > +extern int usb_hcd_register_msi_msix_irqs(struct usb_hcd *hcd);
> > +
> > #ifdef CONFIG_PM_SLEEP
> > extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
> > #endif
> > --
> > 1.6.3.3
Yeah, I don't think this will break anything for my non-PCI stuff, but
the very fact that usbcore knows so much about PCI is quite a bummer. I
think usbcore should know about USB Devices and HCDs, no matter if it's
PCI or platform BUS or whatever else, but that's just me and changing
that would be quite a big re-work.
--
balbi
Download attachment "signature.asc" of type "application/pgp-signature" (837 bytes)
Powered by blists - more mailing lists