linux-kernel - [PATCH 2/4] pch_uart: Add Fish River Island II uart clock quirks

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <74aee0c6f54f3cb6b55578163020d243ae79ae49.1330539597.git.dvhart@linux.intel.com>
Date:	Wed, 29 Feb 2012 10:24:45 -0800
From:	Darren Hart <dvhart@...ux.intel.com>
To:	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Cc:	Darren Hart <dvhart@...ux.intel.com>,
	Tomoya MORINAGA <tomoya.rohm@...il.com>,
	Feng Tang <feng.tang@...el.com>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Alan Cox <alan@...ux.intel.com>, linux-serial@...r.kernel.org
Subject: [PATCH 2/4] pch_uart: Add Fish River Island II uart clock quirks

Add support for the Fish River Island II (FRI2) UART clock following the CM-iTC
quirk handling mechanism. Depending on the firmware installed on the device, the
FRI2 uses a 48MHz or a 64MHz UART clock. This is detected with DMI strings.

Add similar UART clock quirk handling to the pch_console_setup() function to
enable kernel messages on boards with non-standard UART clocks.

Per Alan's suggestion, abstract out UART clock selection into
pch_uart_get_uartclk() to avoid code duplication.

Signed-off-by: Darren Hart <dvhart@...ux.intel.com>
CC: Tomoya MORINAGA <tomoya.rohm@...il.com>
CC: Feng Tang <feng.tang@...el.com>
CC: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
CC: Alan Cox <alan@...ux.intel.com>
CC: linux-serial@...r.kernel.org
---
 drivers/tty/serial/pch_uart.c |   42 +++++++++++++++++++++++++++-------------
 1 files changed, 28 insertions(+), 14 deletions(-)

diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index c565817..3a2b0ae 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -203,7 +203,10 @@ enum {
 
 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
 
-#define DEFAULT_UARTCLK 1843200 /* 1.8432MHz */
+#define DEFAULT_UARTCLK   1843200 /*   1.8432 MHz */
+#define CMITC_UARTCLK   192000000 /* 192.0000 MHz */
+#define FRI2_64_UARTCLK  64000000 /*  64.0000 MHz */
+#define FRI2_48_UARTCLK  48000000 /*  48.0000 MHz */
 
 struct pch_uart_buffer {
 	unsigned char *buf;
@@ -292,6 +295,26 @@ static const int trigger_level_64[4] = { 1, 16, 32, 56 };
 static const int trigger_level_16[4] = { 1, 4, 8, 14 };
 static const int trigger_level_1[4] = { 1, 1, 1, 1 };
 
+/* Return UART clock, checking for board specific clocks. */
+static int pch_uart_get_uartclk(void)
+{
+	const char *cmp;
+
+	cmp = dmi_get_system_info(DMI_BOARD_NAME);
+	if (cmp && strstr(cmp, "CM-iTC"))
+		return CMITC_UARTCLK;
+
+	cmp = dmi_get_system_info(DMI_BIOS_VERSION);
+	if (cmp && strnstr(cmp, "FRI2", 4))
+		return FRI2_64_UARTCLK;
+
+	cmp = dmi_get_system_info(DMI_PRODUCT_NAME);
+	if (cmp && strstr(cmp, "Fish River Island II"))
+		return FRI2_48_UARTCLK;
+
+	return DEFAULT_UARTCLK;
+}
+
 static void pch_uart_hal_request(struct pci_dev *pdev, int fifosize,
 				 int uartclk)
 {
@@ -1506,8 +1529,7 @@ static int __init pch_console_setup(struct console *co, char *options)
 	if (!port || (!port->iobase && !port->membase))
 		return -ENODEV;
 
-	/* setup uartclock */
-	port->uartclk = DEFAULT_UARTCLK;
+	port->uartclk = pch_uart_get_uartclk();
 
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -1550,10 +1572,9 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
 	unsigned int iobase;
 	unsigned int mapbase;
 	unsigned char *rxbuf;
-	int fifosize, uartclk;
+	int fifosize;
 	int port_type;
 	struct pch_uart_driver_data *board;
-	const char *board_name;
 
 	board = &drv_dat[id->driver_data];
 	port_type = board->port_type;
@@ -1566,13 +1587,6 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
 	if (!rxbuf)
 		goto init_port_free_txbuf;
 
-	uartclk = DEFAULT_UARTCLK;
-
-	/* quirk for CM-iTC board */
-	board_name = dmi_get_system_info(DMI_BOARD_NAME);
-	if (board_name && strstr(board_name, "CM-iTC"))
-		uartclk = 192000000; /* 192.0MHz */
-
 	switch (port_type) {
 	case PORT_UNKNOWN:
 		fifosize = 256; /* EG20T/ML7213: UART0 */
@@ -1597,7 +1611,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
 	priv->rxbuf.size = PAGE_SIZE;
 
 	priv->fifo_size = fifosize;
-	priv->uartclk = uartclk;
+	priv->uartclk = pch_uart_get_uartclk();
 	priv->port_type = PORT_MAX_8250 + port_type + 1;
 	priv->port.dev = &pdev->dev;
 	priv->port.iobase = iobase;
@@ -1614,7 +1628,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
 	spin_lock_init(&priv->port.lock);
 
 	pci_set_drvdata(pdev, priv);
-	pch_uart_hal_request(pdev, fifosize, uartclk);
+	pch_uart_hal_request(pdev, fifosize, priv->uartclk);
 
 #ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
 	pch_uart_ports[board->line_no] = priv;
-- 
1.7.6.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/