lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4F6B4D4A.2040103@denx.de>
Date:	Thu, 22 Mar 2012 17:03:22 +0100
From:	Stefano Babic <sbabic@...x.de>
To:	Kyle Manna <kyle.manna@...l7.com>
CC:	Tony Lindgren <tony@...mide.com>, linux-omap@...r.kernel.org,
	Paul Walmsley <paul@...an.com>, Kevin Hilman <khilman@...com>,
	Nicolas Pitre <nicolas.pitre@...aro.org>,
	Benoit Cousson <b-cousson@...com>,
	linux-kernel@...r.kernel.org,
	Peter Ujfalusi <peter.ujfalusi@...com>,
	Santosh Shilimkar <santosh.shilimkar@...com>,
	linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH] ARM: OMAP: Add support for AM35xx UART4/ttyO3

On 18/10/2011 20:47, Kyle Manna wrote:
> Add hwmod support to enable access to UART4 of the AM35xx series of
> chips.  The UART4 device referenced from the TRM will show up as ttyO3.
> 
> This was tested on an AM3505.
> 
> Signed-off-by: Kyle Manna <kyle.manna@...l7.com>
> ---

Hi Kyle,

>  arch/arm/mach-omap2/clock3xxx_data.c       |   11 ++++++
>  arch/arm/mach-omap2/omap_hwmod_3xxx_data.c |   52 ++++++++++++++++++++++++++++
>  arch/arm/mach-omap2/prcm-common.h          |    2 +
>  arch/arm/plat-omap/include/plat/irqs.h     |    2 +-
>  arch/arm/plat-omap/include/plat/serial.h   |    1 +
>  5 files changed, 67 insertions(+), 1 deletions(-)

Can I gently ask you which pinmux setup do you use to test your patch ?

I am trying to make uart4 working on a am3517 with mainline kernel
(3.3+, your patch is merged). However, on my board the uart4 pins are
shared with the camera, and not with SD, as maybe is more common. I set
the pinmux to switch the pins (gpio_95 / gpio_96 / gpio_97 /gpio_98) to
the uart4, and ttyO3 is registered and available, and thanks your patch
both clocks iclk and fclk are active. However, I cannot see activity on
the tx line if I try to send some characters.

Maybe do you use the same pinmux and am I forgetting something else ?

Thanks,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@...x.de
=====================================================================
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ