[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1333489609.2695.14.camel@joe2Laptop>
Date: Tue, 03 Apr 2012 14:46:49 -0700
From: Joe Perches <joe@...ches.com>
To: "John W. Linville" <linville@...driver.com>
Cc: Christian Lamparter <chunkeey@...glemail.com>,
Brett Rudley <brudley@...adcom.com>,
Roland Vossen <rvossen@...adcom.com>,
Arend van Spriel <arend@...adcom.com>,
"Franky (Zhenhui) Lin" <frankyl@...adcom.com>,
Kan Yan <kanyan@...adcom.com>, Bing Zhao <bzhao@...vell.com>,
Larry Finger <Larry.Finger@...inger.net>,
Chaoming Li <chaoming_li@...lsil.com.cn>,
linux-wireless@...r.kernel.org, netdev@...r.kernel.org,
LKML <linux-kernel@...r.kernel.org>
Subject: [PATCH wireless-next] wireless: Remove unnecessary ; from while (0)
macros
Semicolons are not necessary after macros that end in while (0).
Remove them.
Simplify the macros with tests of
do { if (foo>size) memset1; else memset2;} while (0);
to a single line memset(,,min_t(size_t, foo, size))
Signed-off-by: Joe Perches <joe@...ches.com>
---
drivers/net/wireless/ath/carl9170/cmd.h | 6 +++---
drivers/net/wireless/brcm80211/brcmsmac/d11.h | 2 +-
drivers/net/wireless/mwifiex/sdio.h | 8 ++++----
drivers/net/wireless/rtlwifi/rtl8192ce/trx.h | 7 +------
drivers/net/wireless/rtlwifi/rtl8192de/trx.h | 8 ++------
drivers/net/wireless/rtlwifi/rtl8192se/def.h | 7 +------
drivers/net/wireless/rtlwifi/rtl8192se/fw.h | 6 +++---
7 files changed, 15 insertions(+), 29 deletions(-)
diff --git a/drivers/net/wireless/ath/carl9170/cmd.h b/drivers/net/wireless/ath/carl9170/cmd.h
index 885c427..65919c9 100644
--- a/drivers/net/wireless/ath/carl9170/cmd.h
+++ b/drivers/net/wireless/ath/carl9170/cmd.h
@@ -114,7 +114,7 @@ __regwrite_out : \
#define carl9170_regwrite_result() \
__err; \
-} while (0);
+} while (0)
#define carl9170_async_regwrite_get_buf() \
@@ -126,7 +126,7 @@ do { \
__err = -ENOMEM; \
goto __async_regwrite_out; \
} \
-} while (0);
+} while (0)
#define carl9170_async_regwrite_begin(carl) \
do { \
@@ -169,6 +169,6 @@ __async_regwrite_out: \
#define carl9170_async_regwrite_result() \
__err; \
-} while (0);
+} while (0)
#endif /* __CMD_H */
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/d11.h b/drivers/net/wireless/brcm80211/brcmsmac/d11.h
index 1948cb2..3f659e0 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/d11.h
+++ b/drivers/net/wireless/brcm80211/brcmsmac/d11.h
@@ -733,7 +733,7 @@ struct cck_phy_hdr {
do { \
plcp[1] = len & 0xff; \
plcp[2] = ((len >> 8) & 0xff); \
- } while (0);
+ } while (0)
#define BRCMS_SET_MIMO_PLCP_AMPDU(plcp) (plcp[3] |= MIMO_PLCP_AMPDU)
#define BRCMS_CLR_MIMO_PLCP_AMPDU(plcp) (plcp[3] &= ~MIMO_PLCP_AMPDU)
diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h
index a3fb322..0ead152 100644
--- a/drivers/net/wireless/mwifiex/sdio.h
+++ b/drivers/net/wireless/mwifiex/sdio.h
@@ -193,7 +193,7 @@
a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt+1+(MAX_PORT - \
a->mp_end_port))); \
a->mpa_tx.pkt_cnt++; \
-} while (0);
+} while (0)
/* SDIO Tx aggregation limit ? */
#define MP_TX_AGGR_PKT_LIMIT_REACHED(a) \
@@ -211,7 +211,7 @@
a->mpa_tx.buf_len = 0; \
a->mpa_tx.ports = 0; \
a->mpa_tx.start_port = 0; \
-} while (0);
+} while (0)
/* SDIO Rx aggregation limit ? */
#define MP_RX_AGGR_PKT_LIMIT_REACHED(a) \
@@ -242,7 +242,7 @@
a->mpa_rx.skb_arr[a->mpa_rx.pkt_cnt] = skb; \
a->mpa_rx.len_arr[a->mpa_rx.pkt_cnt] = skb->len; \
a->mpa_rx.pkt_cnt++; \
-} while (0);
+} while (0)
/* Reset SDIO Rx aggregation buffer parameters */
#define MP_RX_AGGR_BUF_RESET(a) do { \
@@ -250,7 +250,7 @@
a->mpa_rx.buf_len = 0; \
a->mpa_rx.ports = 0; \
a->mpa_rx.start_port = 0; \
-} while (0);
+} while (0)
/* data structure for SDIO MPA TX */
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h
index efb9ab2..c4adb97 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h
@@ -530,12 +530,7 @@
SET_BITS_OFFSET_LE(__pdesc+28, 0, 32, __val)
#define CLEAR_PCI_TX_DESC_CONTENT(__pdesc, _size) \
-do { \
- if (_size > TX_DESC_NEXT_DESC_OFFSET) \
- memset(__pdesc, 0, TX_DESC_NEXT_DESC_OFFSET); \
- else \
- memset(__pdesc, 0, _size); \
-} while (0);
+ memset(__pdesc, 0, min_t(size_t, _size, TX_DESC_NEXT_DESC_OFFSET))
struct rx_fwinfo_92c {
u8 gain_trsw[4];
diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/trx.h b/drivers/net/wireless/rtlwifi/rtl8192de/trx.h
index 0dc736c..057a524 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192de/trx.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/trx.h
@@ -530,12 +530,8 @@
SET_BITS_OFFSET_LE(__pdesc+28, 0, 32, __val)
#define CLEAR_PCI_TX_DESC_CONTENT(__pdesc, _size) \
-do { \
- if (_size > TX_DESC_NEXT_DESC_OFFSET) \
- memset((void *)__pdesc, 0, TX_DESC_NEXT_DESC_OFFSET); \
- else \
- memset((void *)__pdesc, 0, _size); \
-} while (0);
+ memset((void *)__pdesc, 0, \
+ min_t(size_t, _size, TX_DESC_NEXT_DESC_OFFSET))
/* For 92D early mode */
#define SET_EARLYMODE_PKTNUM(__paddr, __value) \
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/def.h b/drivers/net/wireless/rtlwifi/rtl8192se/def.h
index d1b0a1e..20afec6 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/def.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/def.h
@@ -252,12 +252,7 @@
* the desc is cleared. */
#define TX_DESC_NEXT_DESC_OFFSET 36
#define CLEAR_PCI_TX_DESC_CONTENT(__pdesc, _size) \
-do { \
- if (_size > TX_DESC_NEXT_DESC_OFFSET) \
- memset(__pdesc, 0, TX_DESC_NEXT_DESC_OFFSET); \
- else \
- memset(__pdesc, 0, _size); \
-} while (0);
+ memset(__pdesc, 0, min_t(size_t, _size, TX_DESC_NEXT_DESC_OFFSET))
/* Rx Desc */
#define RX_STATUS_DESC_SIZE 24
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/fw.h b/drivers/net/wireless/rtlwifi/rtl8192se/fw.h
index b4afff6..d53f433 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/fw.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/fw.h
@@ -345,7 +345,7 @@ enum fw_h2c_cmd {
do { \
udelay(1000); \
rtlpriv->rtlhal.fwcmd_iomap &= (~_Bit); \
- } while (0);
+ } while (0)
#define FW_CMD_IO_UPDATE(rtlpriv, _val) \
rtlpriv->rtlhal.fwcmd_iomap = _val;
@@ -354,13 +354,13 @@ enum fw_h2c_cmd {
do { \
rtl_write_word(rtlpriv, LBUS_MON_ADDR, (u16)_val); \
FW_CMD_IO_UPDATE(rtlpriv, _val); \
- } while (0);
+ } while (0)
#define FW_CMD_PARA_SET(rtlpriv, _val) \
do { \
rtl_write_dword(rtlpriv, LBUS_ADDR_MASK, _val); \
rtlpriv->rtlhal.fwcmd_ioparam = _val; \
- } while (0);
+ } while (0)
#define FW_CMD_IO_QUERY(rtlpriv) \
(u16)(rtlpriv->rtlhal.fwcmd_iomap)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists