| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4F87C7AB.3060002@intel.com>
Date: Fri, 13 Apr 2012 14:28:59 +0800
From: "Yan, Zheng" <zheng.z.yan@...el.com>
To: Alex He <alex.he@....com>
CC: bhelgaas@...gle.com, rjw@...k.pl, linux-kernel@...r.kernel.org,
linux-pci@...r.kernel.org, linux-pm@...r.kernel.org
Subject: Re: [RFC PATCH] PCIe: Add PCIe runtime D3cold support
On 04/13/2012 02:06 PM, Alex He wrote:
> On Fri, Apr 13, 2012 at 10:35:34AM +0800, Yan, Zheng wrote:
>> Hi all,
>>
>> This patch adds PCIe runtime D3cold support, namely cut power supply for functions
>> beneath a PCIe port when they all have entered D3. A device in D3cold can only
>> generate wake event through the WAKE# pin. Because we can not access to a device's
>> configure space while it's in D3cold, pme_poll is disabled for devices in D3cold.
>>
>> Any comment will be appreciated.
>>
>> Signed-off-by: Zheng Yan <zheng.z.yan@...el.com>
>> ---
>> diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
>> index 0f150f2..e210e8cb 100644
>> --- a/drivers/pci/pci-acpi.c
>> +++ b/drivers/pci/pci-acpi.c
>> @@ -224,7 +224,7 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
>> [PCI_D1] = ACPI_STATE_D1,
>> [PCI_D2] = ACPI_STATE_D2,
>> [PCI_D3hot] = ACPI_STATE_D3,
>> - [PCI_D3cold] = ACPI_STATE_D3
>> + [PCI_D3cold] = ACPI_STATE_D3_COLD
>> };
>> int error = -EINVAL;
>>
>> @@ -296,7 +296,8 @@ static void acpi_pci_propagate_run_wake(struct pci_bus *bus, bool enable)
>>
>> static int acpi_pci_run_wake(struct pci_dev *dev, bool enable)
>> {
>> - if (dev->pme_interrupt)
>> + /* PME interrupt isn't available in the D3cold case */
>> + if (dev->pme_interrupt && !dev->runtime_d3cold)
>> return 0;
> PCI BUS PM Interface spec says that PMEs can be support for D3COLD.
> Please check section 3.2.4 , 5.4.2 and 5.4.3.
>
I can't make PME interrupt work in mint spring platform. Our internal RTD3 document say:
"A device in RTD3 is prohibited from generating any activity other than wake event, through the WAKE# pin"
>>
>> if (!acpi_pm_device_run_wake(&dev->dev, enable))
>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>> index 8156744..bc16869 100644
>> --- a/drivers/pci/pci.c
>> +++ b/drivers/pci/pci.c
>> @@ -731,8 +731,8 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
>> int error;
>>
>> /* bound the state we're entering */
>> - if (state > PCI_D3hot)
>> - state = PCI_D3hot;
>> + if (state > PCI_D3cold)
>> + state = PCI_D3cold;
>> else if (state < PCI_D0)
>> state = PCI_D0;
>> else if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
>> @@ -750,7 +750,8 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
>> if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
>> return 0;
>>
>> - error = pci_raw_set_power_state(dev, state);
>> + error = pci_raw_set_power_state(dev, state > PCI_D3hot ?
>> + PCI_D3hot : state);
> Do you want to set the pci device to D3hot if the state = D3Code through
> PMCSR register? I am agree if you realy want that but what is the meaninig
> to distingulish D3cold with D3hot in this patch. We can't put the PCI device
> through PMCSR register.
To set a device to D3cold. We first set device to D3hot through PMCSR register,
then cut the power supply through ACPI.
Regards
Yan, Zheng
>
>>
>> if (!__pci_complete_power_transition(dev, state))
>> error = 0;
>> @@ -1482,6 +1483,17 @@ bool pci_pme_capable(struct pci_dev *dev, pci_power_t state)
>> return !!(dev->pme_support & (1 << state));
>> }
>>
>> +static void pci_pme_poll_wakeup(struct pci_dev *dev)
>> +{
>> + struct pci_dev *bridge = dev->bus->self;
>> +
>> + /* don't poll the pme bit if parent is in low power state */
>> + if (bridge && bridge->current_state != PCI_D0)
>> + return;
>> +
>> + pci_pme_wakeup(dev, NULL);
>> +}
>> +
>> static void pci_pme_list_scan(struct work_struct *work)
>> {
>> struct pci_pme_device *pme_dev, *n;
>> @@ -1490,7 +1502,7 @@ static void pci_pme_list_scan(struct work_struct *work)
>> if (!list_empty(&pci_pme_list)) {
>> list_for_each_entry_safe(pme_dev, n, &pci_pme_list, list) {
>> if (pme_dev->dev->pme_poll) {
>> - pci_pme_wakeup(pme_dev->dev, NULL);
>> + pci_pme_poll_wakeup(pme_dev->dev);
>> } else {
>> list_del(&pme_dev->list);
>> kfree(pme_dev);
>> @@ -1608,6 +1620,10 @@ int __pci_enable_wake(struct pci_dev *dev, pci_power_t state,
>> if (enable) {
>> int error;
>>
>> + if (runtime && state >= PCI_D3cold)
>> + dev->runtime_d3cold = true;
>> + else
>> + dev->runtime_d3cold = false;
>> if (pci_pme_capable(dev, state))
>> pci_pme_active(dev, true);
>> else
>> diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
>> index e0610bd..d66b7e9 100644
>> --- a/drivers/pci/pcie/portdrv_pci.c
>> +++ b/drivers/pci/pcie/portdrv_pci.c
>> @@ -11,11 +11,13 @@
>> #include <linux/kernel.h>
>> #include <linux/errno.h>
>> #include <linux/pm.h>
>> +#include <linux/pm_runtime.h>
>> #include <linux/init.h>
>> #include <linux/pcieport_if.h>
>> #include <linux/aer.h>
>> #include <linux/dmi.h>
>> #include <linux/pci-aspm.h>
>> +#include <linux/delay.h>
>>
>> #include "portdrv.h"
>> #include "aer/aerdrv.h"
>> @@ -99,6 +101,25 @@ static int pcie_port_resume_noirq(struct device *dev)
>> return 0;
>> }
>>
>> +static int pcie_port_runtime_suspend(struct device *dev)
>> +{
>> + struct pci_dev *pdev = to_pci_dev(dev);
>> +
>> + pci_save_state(pdev);
>> + return 0;
>> +}
>> +
>> +static int pcie_port_runtime_resume(struct device *dev)
>> +{
>> + struct pci_dev *pdev = to_pci_dev(dev);
>> +
>> + pci_restore_state(pdev);
>> + if (pdev->runtime_d3cold)
>> + msleep(100);
>> +
>> + return 0;
>> +}
>> +
>> static const struct dev_pm_ops pcie_portdrv_pm_ops = {
>> .suspend = pcie_port_device_suspend,
>> .resume = pcie_port_device_resume,
>> @@ -107,6 +128,8 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = {
>> .poweroff = pcie_port_device_suspend,
>> .restore = pcie_port_device_resume,
>> .resume_noirq = pcie_port_resume_noirq,
>> + .runtime_suspend = pcie_port_runtime_suspend,
>> + .runtime_resume = pcie_port_runtime_resume,
>> };
>>
>> #define PCIE_PORTDRV_PM_OPS (&pcie_portdrv_pm_ops)
>> @@ -144,12 +167,14 @@ static int __devinit pcie_portdrv_probe(struct pci_dev *dev,
>> return status;
>>
>> pci_save_state(dev);
>> + pm_runtime_put_noidle(&dev->dev);
>>
>> return 0;
>> }
>>
>> static void pcie_portdrv_remove(struct pci_dev *dev)
>> {
>> + pm_runtime_get_noresume(&dev->dev);
>> pcie_port_device_remove(dev);
>> pci_disable_device(dev);
>> }
>> diff --git a/include/linux/pci.h b/include/linux/pci.h
>> index e444f5b..b41d9a1 100644
>> --- a/include/linux/pci.h
>> +++ b/include/linux/pci.h
>> @@ -281,6 +281,7 @@ struct pci_dev {
>> unsigned int no_d1d2:1; /* Only allow D0 and D3 */
>> unsigned int mmio_always_on:1; /* disallow turning off io/mem
>> decoding during bar sizing */
>> + unsigned int runtime_d3cold:1;
>> unsigned int wakeup_prepared:1;
>> unsigned int d3_delay; /* D3->D0 transition time in ms */
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
>> the body of a message to majordomo@...r.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists