| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1334906858-25578-3-git-send-email-ldewangan@nvidia.com>
Date: Fri, 20 Apr 2012 12:57:38 +0530
From: Laxman Dewangan <ldewangan@...dia.com>
To: jic23@....ac.uk, gregkh@...uxfoundation.org, max@...o.at,
jbrenner@...sinc.com, bfreed@...omium.org, lars@...afoo.de,
grundler@...omium.org
Cc: linux-iio@...r.kernel.org, devel@...verdev.osuosl.org,
linux-kernel@...r.kernel.org,
Laxman Dewangan <ldewangan@...dia.com>
Subject: [PATCH V4 2/2] staging: iio: light: isl29018: use regmap for register access
Using regmap for accessing register through i2c bus. This will
remove the code for caching registers, read-modify-write logics.
Also it will provide the debugfs feature to dump register
through regmap debugfs.
Signed-off-by: Laxman Dewangan <ldewangan@...dia.com>
---
Change from V1:
- Spliting the changes in two patches.
- Separate patch for indenting cleanups.
- Rebased the code on top of -next which have Jonathan's recent changes.
Changes from V2:
- Taken care of Lars's review comment about wrong return.
Changes from V3:
Taken care of Lars's and Grant's comment about COMMAND1 register access.
-Use regmap_write() for ADD_COMMAND1 and keeping this as volatile.
drivers/staging/iio/light/Kconfig | 1 +
drivers/staging/iio/light/isl29018.c | 178 +++++++++++++++++-----------------
2 files changed, 91 insertions(+), 88 deletions(-)
diff --git a/drivers/staging/iio/light/Kconfig b/drivers/staging/iio/light/Kconfig
index bb633f6..fd39f72 100644
--- a/drivers/staging/iio/light/Kconfig
+++ b/drivers/staging/iio/light/Kconfig
@@ -6,6 +6,7 @@ menu "Light sensors"
config SENSORS_ISL29018
tristate "ISL 29018 light and proximity sensor"
depends on I2C
+ select REGMAP_I2C
default n
help
If you say yes here you get support for ambient light sensing and
diff --git a/drivers/staging/iio/light/isl29018.c b/drivers/staging/iio/light/isl29018.c
index 073e899..de079ae 100644
--- a/drivers/staging/iio/light/isl29018.c
+++ b/drivers/staging/iio/light/isl29018.c
@@ -26,9 +26,11 @@
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/delay.h>
+#include <linux/regmap.h>
#include <linux/slab.h>
#include "../iio.h"
#include "../sysfs.h"
+
#define CONVERSION_TIME_MS 100
#define ISL29018_REG_ADD_COMMAND1 0x00
@@ -51,49 +53,22 @@
#define ISL29018_REG_ADD_DATA_LSB 0x02
#define ISL29018_REG_ADD_DATA_MSB 0x03
-#define ISL29018_MAX_REGS (ISL29018_REG_ADD_DATA_MSB+1)
#define ISL29018_REG_TEST 0x08
#define ISL29018_TEST_SHIFT 0
#define ISL29018_TEST_MASK (0xFF << ISL29018_TEST_SHIFT)
struct isl29018_chip {
- struct i2c_client *client;
+ struct device *dev;
+ struct regmap *regmap;
struct mutex lock;
unsigned int lux_scale;
unsigned int range;
unsigned int adc_bit;
int prox_scheme;
- u8 reg_cache[ISL29018_MAX_REGS];
};
-static int isl29018_write_data(struct i2c_client *client, u8 reg,
- u8 val, u8 mask, u8 shift)
-{
- u8 regval = val;
- int ret;
- struct isl29018_chip *chip = iio_priv(i2c_get_clientdata(client));
-
- /* don't cache or mask REG_TEST */
- if (reg < ISL29018_MAX_REGS) {
- regval = chip->reg_cache[reg];
- regval &= ~mask;
- regval |= val << shift;
- }
-
- ret = i2c_smbus_write_byte_data(client, reg, regval);
- if (ret) {
- dev_err(&client->dev, "Write to device fails status %x\n", ret);
- } else {
- /* don't update cache on err */
- if (reg < ISL29018_MAX_REGS)
- chip->reg_cache[reg] = regval;
- }
-
- return ret;
-}
-
-static int isl29018_set_range(struct i2c_client *client, unsigned long range,
+static int isl29018_set_range(struct isl29018_chip *chip, unsigned long range,
unsigned int *new_range)
{
static const unsigned long supp_ranges[] = {1000, 4000, 16000, 64000};
@@ -109,11 +84,11 @@ static int isl29018_set_range(struct i2c_client *client, unsigned long range,
if (i >= ARRAY_SIZE(supp_ranges))
return -EINVAL;
- return isl29018_write_data(client, ISL29018_REG_ADD_COMMANDII,
- i, COMMANDII_RANGE_MASK, COMMANDII_RANGE_SHIFT);
+ return regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMANDII,
+ COMMANDII_RANGE_MASK, i << COMMANDII_RANGE_SHIFT);
}
-static int isl29018_set_resolution(struct i2c_client *client,
+static int isl29018_set_resolution(struct isl29018_chip *chip,
unsigned long adcbit, unsigned int *conf_adc_bit)
{
static const unsigned long supp_adcbit[] = {16, 12, 8, 4};
@@ -129,48 +104,49 @@ static int isl29018_set_resolution(struct i2c_client *client,
if (i >= ARRAY_SIZE(supp_adcbit))
return -EINVAL;
- return isl29018_write_data(client, ISL29018_REG_ADD_COMMANDII,
- i, COMMANDII_RESOLUTION_MASK,
- COMMANDII_RESOLUTION_SHIFT);
+ return regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMANDII,
+ COMMANDII_RESOLUTION_MASK,
+ i << COMMANDII_RESOLUTION_SHIFT);
}
-static int isl29018_read_sensor_input(struct i2c_client *client, int mode)
+static int isl29018_read_sensor_input(struct isl29018_chip *chip, int mode)
{
int status;
- int lsb;
- int msb;
+ unsigned int lsb;
+ unsigned int msb;
/* Set mode */
- status = isl29018_write_data(client, ISL29018_REG_ADD_COMMAND1,
- mode, COMMMAND1_OPMODE_MASK, COMMMAND1_OPMODE_SHIFT);
+ status = regmap_write(chip->regmap, ISL29018_REG_ADD_COMMAND1,
+ mode << COMMMAND1_OPMODE_SHIFT);
if (status) {
- dev_err(&client->dev, "Error in setting operating mode\n");
+ dev_err(chip->dev,
+ "Error in setting operating mode err %d\n", status);
return status;
}
msleep(CONVERSION_TIME_MS);
- lsb = i2c_smbus_read_byte_data(client, ISL29018_REG_ADD_DATA_LSB);
- if (lsb < 0) {
- dev_err(&client->dev, "Error in reading LSB DATA\n");
- return lsb;
+ status = regmap_read(chip->regmap, ISL29018_REG_ADD_DATA_LSB, &lsb);
+ if (status < 0) {
+ dev_err(chip->dev,
+ "Error in reading LSB DATA with err %d\n", status);
+ return status;
}
- msb = i2c_smbus_read_byte_data(client, ISL29018_REG_ADD_DATA_MSB);
- if (msb < 0) {
- dev_err(&client->dev, "Error in reading MSB DATA\n");
- return msb;
+ status = regmap_read(chip->regmap, ISL29018_REG_ADD_DATA_MSB, &msb);
+ if (status < 0) {
+ dev_err(chip->dev,
+ "Error in reading MSB DATA with error %d\n", status);
+ return status;
}
- dev_vdbg(&client->dev, "MSB 0x%x and LSB 0x%x\n", msb, lsb);
+ dev_vdbg(chip->dev, "MSB 0x%x and LSB 0x%x\n", msb, lsb);
return (msb << 8) | lsb;
}
-static int isl29018_read_lux(struct i2c_client *client, int *lux)
+static int isl29018_read_lux(struct isl29018_chip *chip, int *lux)
{
int lux_data;
- struct isl29018_chip *chip = iio_priv(i2c_get_clientdata(client));
- lux_data = isl29018_read_sensor_input(client,
- COMMMAND1_OPMODE_ALS_ONCE);
+ lux_data = isl29018_read_sensor_input(chip, COMMMAND1_OPMODE_ALS_ONCE);
if (lux_data < 0)
return lux_data;
@@ -180,11 +156,11 @@ static int isl29018_read_lux(struct i2c_client *client, int *lux)
return 0;
}
-static int isl29018_read_ir(struct i2c_client *client, int *ir)
+static int isl29018_read_ir(struct isl29018_chip *chip, int *ir)
{
int ir_data;
- ir_data = isl29018_read_sensor_input(client, COMMMAND1_OPMODE_IR_ONCE);
+ ir_data = isl29018_read_sensor_input(chip, COMMMAND1_OPMODE_IR_ONCE);
if (ir_data < 0)
return ir_data;
@@ -194,7 +170,7 @@ static int isl29018_read_ir(struct i2c_client *client, int *ir)
return 0;
}
-static int isl29018_read_proximity_ir(struct i2c_client *client, int scheme,
+static int isl29018_read_proximity_ir(struct isl29018_chip *chip, int scheme,
int *near_ir)
{
int status;
@@ -202,14 +178,15 @@ static int isl29018_read_proximity_ir(struct i2c_client *client, int scheme,
int ir_data = -1;
/* Do proximity sensing with required scheme */
- status = isl29018_write_data(client, ISL29018_REG_ADD_COMMANDII,
- scheme, COMMANDII_SCHEME_MASK, COMMANDII_SCHEME_SHIFT);
+ status = regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMANDII,
+ COMMANDII_SCHEME_MASK,
+ scheme << COMMANDII_SCHEME_SHIFT);
if (status) {
- dev_err(&client->dev, "Error in setting operating mode\n");
+ dev_err(chip->dev, "Error in setting operating mode\n");
return status;
}
- prox_data = isl29018_read_sensor_input(client,
+ prox_data = isl29018_read_sensor_input(chip,
COMMMAND1_OPMODE_PROX_ONCE);
if (prox_data < 0)
return prox_data;
@@ -219,8 +196,7 @@ static int isl29018_read_proximity_ir(struct i2c_client *client, int scheme,
return 0;
}
- ir_data = isl29018_read_sensor_input(client,
- COMMMAND1_OPMODE_IR_ONCE);
+ ir_data = isl29018_read_sensor_input(chip, COMMMAND1_OPMODE_IR_ONCE);
if (ir_data < 0)
return ir_data;
@@ -249,7 +225,6 @@ static ssize_t store_range(struct device *dev,
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct isl29018_chip *chip = iio_priv(indio_dev);
- struct i2c_client *client = chip->client;
int status;
unsigned long lval;
unsigned int new_range;
@@ -264,10 +239,11 @@ static ssize_t store_range(struct device *dev,
}
mutex_lock(&chip->lock);
- status = isl29018_set_range(client, lval, &new_range);
+ status = isl29018_set_range(chip, lval, &new_range);
if (status < 0) {
mutex_unlock(&chip->lock);
- dev_err(dev, "Error in setting max range\n");
+ dev_err(dev,
+ "Error in setting max range with err %d\n", status);
return status;
}
chip->range = new_range;
@@ -291,7 +267,6 @@ static ssize_t store_resolution(struct device *dev,
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct isl29018_chip *chip = iio_priv(indio_dev);
- struct i2c_client *client = chip->client;
int status;
unsigned long lval;
unsigned int new_adc_bit;
@@ -304,7 +279,7 @@ static ssize_t store_resolution(struct device *dev,
}
mutex_lock(&chip->lock);
- status = isl29018_set_resolution(client, lval, &new_adc_bit);
+ status = isl29018_set_resolution(chip, lval, &new_adc_bit);
if (status < 0) {
mutex_unlock(&chip->lock);
dev_err(dev, "Error in setting resolution\n");
@@ -379,7 +354,6 @@ static int isl29018_read_raw(struct iio_dev *indio_dev,
{
int ret = -EINVAL;
struct isl29018_chip *chip = iio_priv(indio_dev);
- struct i2c_client *client = chip->client;
mutex_lock(&chip->lock);
switch (mask) {
@@ -387,13 +361,13 @@ static int isl29018_read_raw(struct iio_dev *indio_dev,
case IIO_CHAN_INFO_PROCESSED:
switch (chan->type) {
case IIO_LIGHT:
- ret = isl29018_read_lux(client, val);
+ ret = isl29018_read_lux(chip, val);
break;
case IIO_INTENSITY:
- ret = isl29018_read_ir(client, val);
+ ret = isl29018_read_ir(chip, val);
break;
case IIO_PROXIMITY:
- ret = isl29018_read_proximity_ir(client,
+ ret = isl29018_read_proximity_ir(chip,
chip->prox_scheme, val);
break;
default:
@@ -459,15 +433,12 @@ static const struct attribute_group isl29108_group = {
.attrs = isl29018_attributes,
};
-static int isl29018_chip_init(struct i2c_client *client)
+static int isl29018_chip_init(struct isl29018_chip *chip)
{
- struct isl29018_chip *chip = iio_priv(i2c_get_clientdata(client));
int status;
int new_adc_bit;
unsigned int new_range;
- memset(chip->reg_cache, 0, sizeof(chip->reg_cache));
-
/* Code added per Intersil Application Note 1534:
* When VDD sinks to approximately 1.8V or below, some of
* the part's registers may change their state. When VDD
@@ -488,10 +459,9 @@ static int isl29018_chip_init(struct i2c_client *client)
* the same thing EXCEPT the data sheet asks for a 1ms delay after
* writing the CMD1 register.
*/
- status = isl29018_write_data(client, ISL29018_REG_TEST, 0,
- ISL29018_TEST_MASK, ISL29018_TEST_SHIFT);
+ status = regmap_write(chip->regmap, ISL29018_REG_TEST, 0x0);
if (status < 0) {
- dev_err(&client->dev, "Failed to clear isl29018 TEST reg."
+ dev_err(chip->dev, "Failed to clear isl29018 TEST reg."
"(%d)\n", status);
return status;
}
@@ -500,10 +470,9 @@ static int isl29018_chip_init(struct i2c_client *client)
* "Operating Mode" (COMMAND1) register is reprogrammed when
* data is read from the device.
*/
- status = isl29018_write_data(client, ISL29018_REG_ADD_COMMAND1, 0,
- 0xff, 0);
+ status = regmap_write(chip->regmap, ISL29018_REG_ADD_COMMAND1, 0);
if (status < 0) {
- dev_err(&client->dev, "Failed to clear isl29018 CMD1 reg."
+ dev_err(chip->dev, "Failed to clear isl29018 CMD1 reg."
"(%d)\n", status);
return status;
}
@@ -511,13 +480,13 @@ static int isl29018_chip_init(struct i2c_client *client)
msleep(1); /* per data sheet, page 10 */
/* set defaults */
- status = isl29018_set_range(client, chip->range, &new_range);
+ status = isl29018_set_range(chip, chip->range, &new_range);
if (status < 0) {
- dev_err(&client->dev, "Init of isl29018 fails\n");
+ dev_err(chip->dev, "Init of isl29018 fails\n");
return status;
}
- status = isl29018_set_resolution(client, chip->adc_bit,
+ status = isl29018_set_resolution(chip, chip->adc_bit,
&new_adc_bit);
return 0;
@@ -530,6 +499,32 @@ static const struct iio_info isl29108_info = {
.write_raw = &isl29018_write_raw,
};
+static bool is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case ISL29018_REG_ADD_DATA_LSB:
+ case ISL29018_REG_ADD_DATA_MSB:
+ case ISL29018_REG_ADD_COMMAND1:
+ case ISL29018_REG_TEST:
+ return true;
+ default:
+ return false;
+ }
+}
+
+/*
+ * isl29018_regmap_config: regmap configuration.
+ * Use RBTREE mechanism for caching.
+ */
+static const struct regmap_config isl29018_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .volatile_reg = is_volatile_reg,
+ .max_register = ISL29018_REG_TEST,
+ .num_reg_defaults_raw = ISL29018_REG_TEST + 1,
+ .cache_type = REGCACHE_RBTREE,
+};
+
static int __devinit isl29018_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -546,7 +541,7 @@ static int __devinit isl29018_probe(struct i2c_client *client,
chip = iio_priv(indio_dev);
i2c_set_clientdata(client, indio_dev);
- chip->client = client;
+ chip->dev = &client->dev;
mutex_init(&chip->lock);
@@ -554,7 +549,14 @@ static int __devinit isl29018_probe(struct i2c_client *client,
chip->range = 1000;
chip->adc_bit = 16;
- err = isl29018_chip_init(client);
+ chip->regmap = devm_regmap_init_i2c(client, &isl29018_regmap_config);
+ if (IS_ERR(chip->regmap)) {
+ err = PTR_ERR(chip->regmap);
+ dev_err(chip->dev, "regmap initialization failed: %d\n", err);
+ goto exit;
+ }
+
+ err = isl29018_chip_init(chip);
if (err)
goto exit_iio_free;
--
1.7.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists