| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20120423151327.GA4019@fedora>
Date: Mon, 23 Apr 2012 23:13:27 +0800
From: Aaron Lu <aaron.lu@....com>
To: "Rafael J. Wysocki" <rjw@...k.pl>
Cc: Len Brown <lenb@...nel.org>, Lin Ming <ming.m.lin@...el.com>,
linux-acpi@...r.kernel.org, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org, Zhang Rui <rui.zhang@...el.com>,
Andiry Xu <andiry.xu@....com>, Alex He <alex.he@....com>
Subject: Re: [PATCH] ACPI: evaluate _PS3 when entering D3 Cold
On Mon, Apr 23, 2012 at 01:43:03PM +0200, Rafael J. Wysocki wrote:
> On Monday, April 23, 2012, Aaron Lu wrote:
> > Hi Rafael and Ming,
> >
> > Do you have any more comments on this patch?
> > If not, can I have your ack? Thanks.
> >
> > -Aaron
> >
> > On Sun, Apr 01, 2012 at 02:18:30AM +0800, Aaron Lu wrote:
> > > When entering D3 Cold from a higher device state, evaluate _PS3 first
> > > and then make the proper power transition.
> > > This is used to solve the ZPODD problem on AMD's platform, _PS3 on such
> > > platforms will power off the ODD device and thus make the device enter
> > > D3 cold state.
> > >
> > > Signed-off-by: Aaron Lu <aaron.lu@....com>
> > > Cc: Andiry Xu <andiry.xu@....com>
> > > Cc: Alex He <alex.he@....com>
> > > ---
> > > drivers/acpi/bus.c | 17 ++++++++++++++---
> > > 1 file changed, 14 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
> > > index 3263b68..68e593f 100644
> > > --- a/drivers/acpi/bus.c
> > > +++ b/drivers/acpi/bus.c
> > > @@ -227,6 +227,8 @@ static int __acpi_bus_set_power(struct acpi_device *device, int state)
> > > int result = 0;
> > > acpi_status status = AE_OK;
> > > char object_name[5] = { '_', 'P', 'S', '0' + state, '\0' };
> > > + struct acpi_device_power_state *ps;
> > > + u8 explicit_set;
> > >
> > > if (!device || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3_COLD))
> > > return -EINVAL;
> > > @@ -239,7 +241,8 @@ static int __acpi_bus_set_power(struct acpi_device *device, int state)
> > > return 0;
> > > }
> > >
> > > - if (!device->power.states[state].flags.valid) {
> > > + ps = &device->power.states[state];
> > > + if (!ps->flags.valid) {
> > > printk(KERN_WARNING PREFIX "Device does not support D%d\n", state);
> > > return -ENODEV;
> > > }
> > > @@ -263,7 +266,7 @@ static int __acpi_bus_set_power(struct acpi_device *device, int state)
> > > if (result)
> > > goto end;
> > > }
> > > - if (device->power.states[state].flags.explicit_set) {
> > > + if (ps->flags.explicit_set) {
> > > status = acpi_evaluate_object(device->handle,
> > > object_name, NULL, NULL);
> > > if (ACPI_FAILURE(status)) {
> > > @@ -272,7 +275,15 @@ static int __acpi_bus_set_power(struct acpi_device *device, int state)
> > > }
> > > }
> > > } else {
> > > - if (device->power.states[state].flags.explicit_set) {
> > > + /* If state is D3 Cold, try to evaluate _PS3 first */
> > > + if (state == ACPI_STATE_D3_COLD) {
> > > + explicit_set = (ps - 1)->flags.explicit_set;
> > > + object_name[3] -= 1;
> > > + }
> > > + else {
> > > + explicit_set = ps->flags.explicit_set;
> > > + }
>
> I really don't like this. I think you should modify acpi_bus_get_power_flags(),
> on top of the recent Lin Ming's patch, so that it sets flags.explicit_set for
> D3_COLD if _PS3 is present and _PR3 is not.
>
Thanks for your comments.
> I'm not sure you'll need the $subject patch any more then.
>
A little change is still required. I attached the code below.
BTW, I think _PS3 will also need be executed if both _PS3 and _PR3
available when putting a device into D3cold.
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 3263b68..187433f 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -273,6 +273,9 @@ static int __acpi_bus_set_power(struct acpi_device *device, int state)
}
} else {
if (device->power.states[state].flags.explicit_set) {
+ /* evaluate _PS3 instead of _PS4 when entering D3Cold */
+ if (state == ACPI_STATE_D3)
+ object_name[3] -= 1;
status = acpi_evaluate_object(device->handle,
object_name, NULL, NULL);
if (ACPI_FAILURE(status)) {
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 7417267..de2ae10 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -887,8 +887,12 @@ static int acpi_bus_get_power_flags(struct acpi_device *device)
/* Evaluate "_PSx" to see if we can do explicit sets */
object_name[2] = 'S';
status = acpi_get_handle(device->handle, object_name, &handle);
- if (ACPI_SUCCESS(status))
+ if (ACPI_SUCCESS(status)) {
ps->flags.explicit_set = 1;
+ /* Also set D3Cold's explicit flag when _PS3 exists */
+ if (i == ACPI_STATE_D3_HOT)
+ (ps+1)->flags.explicit_set = 1;
+ }
/*
* State is valid if there are means to put the device into it.
Do you like this?
Thanks,
Aaron
> > > + if (explicit_set) {
> > > status = acpi_evaluate_object(device->handle,
> > > object_name, NULL, NULL);
> > > if (ACPI_FAILURE(status)) {
>
> Thanks,
> Rafael
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists