| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 23 Apr 2012 21:50:57 +0200
From: "Rafael J. Wysocki" <rjw@...k.pl>
To: Aaron Lu <aaron.lu@....com>
Cc: Len Brown <lenb@...nel.org>, Lin Ming <ming.m.lin@...el.com>,
linux-acpi@...r.kernel.org, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org, Zhang Rui <rui.zhang@...el.com>,
Andiry Xu <andiry.xu@....com>, Alex He <alex.he@....com>
Subject: Re: [PATCH] ACPI: evaluate _PS3 when entering D3 Cold
On Monday, April 23, 2012, Aaron Lu wrote:
> On Mon, Apr 23, 2012 at 01:43:03PM +0200, Rafael J. Wysocki wrote:
> > On Monday, April 23, 2012, Aaron Lu wrote:
> > > Hi Rafael and Ming,
> > >
> > > Do you have any more comments on this patch?
> > > If not, can I have your ack? Thanks.
> > >
> > > -Aaron
> > >
> > > On Sun, Apr 01, 2012 at 02:18:30AM +0800, Aaron Lu wrote:
> > > > When entering D3 Cold from a higher device state, evaluate _PS3 first
> > > > and then make the proper power transition.
> > > > This is used to solve the ZPODD problem on AMD's platform, _PS3 on such
> > > > platforms will power off the ODD device and thus make the device enter
> > > > D3 cold state.
> > > >
> > > > Signed-off-by: Aaron Lu <aaron.lu@....com>
> > > > Cc: Andiry Xu <andiry.xu@....com>
> > > > Cc: Alex He <alex.he@....com>
> > > > ---
> > > > drivers/acpi/bus.c | 17 ++++++++++++++---
> > > > 1 file changed, 14 insertions(+), 3 deletions(-)
> > > >
> > > > diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
> > > > index 3263b68..68e593f 100644
> > > > --- a/drivers/acpi/bus.c
> > > > +++ b/drivers/acpi/bus.c
> > > > @@ -227,6 +227,8 @@ static int __acpi_bus_set_power(struct acpi_device *device, int state)
> > > > int result = 0;
> > > > acpi_status status = AE_OK;
> > > > char object_name[5] = { '_', 'P', 'S', '0' + state, '\0' };
> > > > + struct acpi_device_power_state *ps;
> > > > + u8 explicit_set;
> > > >
> > > > if (!device || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3_COLD))
> > > > return -EINVAL;
> > > > @@ -239,7 +241,8 @@ static int __acpi_bus_set_power(struct acpi_device *device, int state)
> > > > return 0;
> > > > }
> > > >
> > > > - if (!device->power.states[state].flags.valid) {
> > > > + ps = &device->power.states[state];
> > > > + if (!ps->flags.valid) {
> > > > printk(KERN_WARNING PREFIX "Device does not support D%d\n", state);
> > > > return -ENODEV;
> > > > }
> > > > @@ -263,7 +266,7 @@ static int __acpi_bus_set_power(struct acpi_device *device, int state)
> > > > if (result)
> > > > goto end;
> > > > }
> > > > - if (device->power.states[state].flags.explicit_set) {
> > > > + if (ps->flags.explicit_set) {
> > > > status = acpi_evaluate_object(device->handle,
> > > > object_name, NULL, NULL);
> > > > if (ACPI_FAILURE(status)) {
> > > > @@ -272,7 +275,15 @@ static int __acpi_bus_set_power(struct acpi_device *device, int state)
> > > > }
> > > > }
> > > > } else {
> > > > - if (device->power.states[state].flags.explicit_set) {
> > > > + /* If state is D3 Cold, try to evaluate _PS3 first */
> > > > + if (state == ACPI_STATE_D3_COLD) {
> > > > + explicit_set = (ps - 1)->flags.explicit_set;
> > > > + object_name[3] -= 1;
> > > > + }
> > > > + else {
> > > > + explicit_set = ps->flags.explicit_set;
> > > > + }
> >
> > I really don't like this. I think you should modify acpi_bus_get_power_flags(),
> > on top of the recent Lin Ming's patch, so that it sets flags.explicit_set for
> > D3_COLD if _PS3 is present and _PR3 is not.
> >
>
> Thanks for your comments.
>
> > I'm not sure you'll need the $subject patch any more then.
> >
>
> A little change is still required. I attached the code below.
> BTW, I think _PS3 will also need be executed if both _PS3 and _PR3
> available when putting a device into D3cold.
Yes, ACPI 5.0 seems to indicate so at least.
> diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
> index 3263b68..187433f 100644
> --- a/drivers/acpi/bus.c
> +++ b/drivers/acpi/bus.c
> @@ -273,6 +273,9 @@ static int __acpi_bus_set_power(struct acpi_device *device, int state)
> }
> } else {
> if (device->power.states[state].flags.explicit_set) {
> + /* evaluate _PS3 instead of _PS4 when entering D3Cold */
> + if (state == ACPI_STATE_D3)
> + object_name[3] -= 1;
Can you just put '3' here directly? That'll be much cleaner than the
subtraction (that could have been -- as well).
> status = acpi_evaluate_object(device->handle,
> object_name, NULL, NULL);
> if (ACPI_FAILURE(status)) {
> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
> index 7417267..de2ae10 100644
> --- a/drivers/acpi/scan.c
> +++ b/drivers/acpi/scan.c
> @@ -887,8 +887,12 @@ static int acpi_bus_get_power_flags(struct acpi_device *device)
> /* Evaluate "_PSx" to see if we can do explicit sets */
> object_name[2] = 'S';
> status = acpi_get_handle(device->handle, object_name, &handle);
> - if (ACPI_SUCCESS(status))
> + if (ACPI_SUCCESS(status)) {
> ps->flags.explicit_set = 1;
> + /* Also set D3Cold's explicit flag when _PS3 exists */
> + if (i == ACPI_STATE_D3_HOT)
> + (ps+1)->flags.explicit_set = 1;
Please don't use pointer arithmetics here. I know it _happens_ to work,
but I don't think it's appropriate in this situation at all.
> + }
>
> /*
> * State is valid if there are means to put the device into it.
Thanks,
Rafael
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists