| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4F964551.4050507@st.com>
Date: Tue, 24 Apr 2012 08:16:49 +0200
From: Giuseppe CAVALLARO <peppe.cavallaro@...com>
To: Viresh KUMAR <viresh.kumar@...com>
Cc: akpm@...ux-foundation.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, mturquette@...aro.org,
sshtylyov@...sta.com, jgarzik@...hat.com, linux@....linux.org.uk,
spear-devel@...t.st.com, viresh.linux@...il.com,
"David S. Miller" <davem@...emloft.net>,
ML netdev <netdev@...r.kernel.org>
Subject: Re: [PATCH V2 6/9] net/stmmac: Remove conditional compilation of
clk code
On 4/24/2012 7:56 AM, Viresh KUMAR wrote:
> With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
> there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
> macros.
Hello Viresh
patch only applies fine against the net-next repository so on top of the
diver version: March_2012 and it builds fine on arch w/ w/o HAVE_CLK
(just tested).
Thanks a lot.
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@...com>
> Signed-off-by: Viresh Kumar <viresh.kumar@...com>
> Cc: Giuseppe Cavallaro <peppe.cavallaro@...com>
> Cc: David S. Miller <davem@...emloft.net>
> ---
> drivers/net/ethernet/stmicro/stmmac/stmmac.h | 41 ---------------------
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 31 ++++++++++------
> 2 files changed, 19 insertions(+), 53 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> index db2de9a..7f85895 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> @@ -81,9 +81,7 @@ struct stmmac_priv {
> struct stmmac_counters mmc;
> struct dma_features dma_cap;
> int hw_cap_support;
> -#ifdef CONFIG_HAVE_CLK
> struct clk *stmmac_clk;
> -#endif
> int clk_csr;
> };
>
> @@ -103,42 +101,3 @@ int stmmac_dvr_remove(struct net_device *ndev);
> struct stmmac_priv *stmmac_dvr_probe(struct device *device,
> struct plat_stmmacenet_data *plat_dat,
> void __iomem *addr);
> -
> -#ifdef CONFIG_HAVE_CLK
> -static inline int stmmac_clk_enable(struct stmmac_priv *priv)
> -{
> - if (!IS_ERR(priv->stmmac_clk))
> - return clk_enable(priv->stmmac_clk);
> -
> - return 0;
> -}
> -
> -static inline void stmmac_clk_disable(struct stmmac_priv *priv)
> -{
> - if (IS_ERR(priv->stmmac_clk))
> - return;
> -
> - clk_disable(priv->stmmac_clk);
> -}
> -static inline int stmmac_clk_get(struct stmmac_priv *priv)
> -{
> - priv->stmmac_clk = clk_get(priv->device, NULL);
> -
> - if (IS_ERR(priv->stmmac_clk))
> - return PTR_ERR(priv->stmmac_clk);
> -
> - return 0;
> -}
> -#else
> -static inline int stmmac_clk_enable(struct stmmac_priv *priv)
> -{
> - return 0;
> -}
> -static inline void stmmac_clk_disable(struct stmmac_priv *priv)
> -{
> -}
> -static inline int stmmac_clk_get(struct stmmac_priv *priv)
> -{
> - return 0;
> -}
> -#endif /* CONFIG_HAVE_CLK */
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index 1a4cf81..18ce287 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -28,6 +28,7 @@
> https://bugzilla.stlinux.com/
> *******************************************************************************/
>
> +#include <linux/clk.h>
> #include <linux/kernel.h>
> #include <linux/interrupt.h>
> #include <linux/ip.h>
> @@ -165,7 +166,6 @@ static void stmmac_verify_args(void)
>
> static void stmmac_clk_csr_set(struct stmmac_priv *priv)
> {
> -#ifdef CONFIG_HAVE_CLK
> u32 clk_rate;
>
> if (IS_ERR(priv->stmmac_clk))
> @@ -192,7 +192,6 @@ static void stmmac_clk_csr_set(struct stmmac_priv *priv)
> * we can not estimate the proper divider as it is not known
> * the frequency of clk_csr_i. So we do not change the default
> * divider. */
> -#endif
> }
>
> #if defined(STMMAC_XMIT_DEBUG) || defined(STMMAC_RX_DEBUG)
> @@ -971,7 +970,8 @@ static int stmmac_open(struct net_device *dev)
> } else
> priv->tm->enable = 1;
> #endif
> - stmmac_clk_enable(priv);
> + if (!IS_ERR(priv->stmmac_clk))
> + clk_enable(priv->stmmac_clk);
>
> stmmac_check_ether_addr(priv);
>
> @@ -1075,7 +1075,8 @@ open_error:
> if (priv->phydev)
> phy_disconnect(priv->phydev);
>
> - stmmac_clk_disable(priv);
> + if (!IS_ERR(priv->stmmac_clk))
> + clk_disable(priv->stmmac_clk);
>
> return ret;
> }
> @@ -1128,7 +1129,9 @@ static int stmmac_release(struct net_device *dev)
> #ifdef CONFIG_STMMAC_DEBUG_FS
> stmmac_exit_fs();
> #endif
> - stmmac_clk_disable(priv);
> +
> + if (!IS_ERR(priv->stmmac_clk))
> + clk_disable(priv->stmmac_clk);
>
> return 0;
> }
> @@ -1925,7 +1928,8 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
> goto error;
> }
>
> - if (stmmac_clk_get(priv))
> + priv->stmmac_clk = clk_get(priv->device, NULL);
> + if (IS_ERR(priv->stmmac_clk))
> pr_warning("%s: warning: cannot get CSR clock\n", __func__);
>
> /* If a specific clk_csr value is passed from the platform
> @@ -1934,10 +1938,12 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
> * set the MDC clock dynamically according to the csr actual
> * clock input.
> */
> - if (!priv->plat->clk_csr)
> - stmmac_clk_csr_set(priv);
> - else
> + if (!priv->plat->clk_csr) {
> + if (!IS_ERR(priv->stmmac_clk))
> + stmmac_clk_csr_set(priv);
> + } else {
> priv->clk_csr = priv->plat->clk_csr;
> + }
>
> /* MDIO bus Registration */
> ret = stmmac_mdio_register(ndev);
> @@ -2020,7 +2026,8 @@ int stmmac_suspend(struct net_device *ndev)
> else {
> stmmac_set_mac(priv->ioaddr, false);
> /* Disable clock in case of PWM is off */
> - stmmac_clk_disable(priv);
> + if (!IS_ERR(priv->stmmac_clk))
> + clk_disable(priv->stmmac_clk);
> }
> spin_unlock(&priv->lock);
> return 0;
> @@ -2042,9 +2049,9 @@ int stmmac_resume(struct net_device *ndev)
> * from another devices (e.g. serial console). */
> if (device_may_wakeup(priv->device))
> priv->hw->mac->pmt(priv->ioaddr, 0);
> - else
> + else if (!IS_ERR(priv->stmmac_clk))
> /* enable the clk prevously disabled */
> - stmmac_clk_enable(priv);
> + clk_enable(priv->stmmac_clk);
>
> netif_device_attach(ndev);
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists