| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4e7b718aecc03b0c2bbde75bb6fc5464a9e38115.1336644470.git.nicolas.ferre@atmel.com>
Date: Thu, 10 May 2012 12:17:41 +0200
From: Nicolas Ferre <nicolas.ferre@...el.com>
To: <vinod.koul@...ux.intel.com>
CC: <linux-arm-kernel@...ts.infradead.org>, <plagnioj@...osoft.com>,
<linux-kernel@...r.kernel.org>, <ludovic.desroches@...el.com>,
Nicolas Ferre <nicolas.ferre@...el.com>
Subject: [PATCH 3/3] dmaengine: at_hdmac: take maxburst from slave configuration
The maxburst/chunk size was taken from the private slave DMA data structure.
Use the common API provided by DMA_SLAVE_CONFIG to setup src/dst maxburst
values.
The ctrla field is not needed anymore in the slave private structure nor the
header constants that were located in an architecture specific directory.
The at91sam9g45_devices.c file that was using this platform data is also
modified to remove this now useless data.
Signed-off-by: Nicolas Ferre <nicolas.ferre@...el.com>
---
arch/arm/mach-at91/at91sam9g45_devices.c | 1 -
arch/arm/mach-at91/include/mach/at_hdmac.h | 21 ---------------------
drivers/dma/at_hdmac.c | 7 ++++---
drivers/dma/at_hdmac_regs.h | 21 ++++++++++++++++++++-
4 files changed, 24 insertions(+), 26 deletions(-)
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 6b008ae..b3d2e19 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -441,7 +441,6 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
atslave->dma_dev = &at_hdmac_device.dev;
atslave->cfg = ATC_FIFOCFG_HALFFIFO
| ATC_SRC_H2SEL_HW | ATC_DST_H2SEL_HW;
- atslave->ctrla = ATC_SCSIZE_16 | ATC_DCSIZE_16;
if (mmc_id == 0) /* MCI0 */
atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI0)
| ATC_DST_PER(AT_DMA_ID_MCI0);
diff --git a/arch/arm/mach-at91/include/mach/at_hdmac.h b/arch/arm/mach-at91/include/mach/at_hdmac.h
index 810a13e..cab0997 100644
--- a/arch/arm/mach-at91/include/mach/at_hdmac.h
+++ b/arch/arm/mach-at91/include/mach/at_hdmac.h
@@ -27,12 +27,10 @@ struct at_dma_platform_data {
* struct at_dma_slave - Controller-specific information about a slave
* @dma_dev: required DMA master device
* @cfg: Platform-specific initializer for the CFG register
- * @ctrla: Platform-specific initializer for the CTRLA register
*/
struct at_dma_slave {
struct device *dma_dev;
u32 cfg;
- u32 ctrla;
};
@@ -59,24 +57,5 @@ struct at_dma_slave {
#define ATC_FIFOCFG_HALFFIFO (0x1 << 28)
#define ATC_FIFOCFG_ENOUGHSPACE (0x2 << 28)
-/* Platform-configurable bits in CTRLA */
-#define ATC_SCSIZE_MASK (0x7 << 16) /* Source Chunk Transfer Size */
-#define ATC_SCSIZE_1 (0x0 << 16)
-#define ATC_SCSIZE_4 (0x1 << 16)
-#define ATC_SCSIZE_8 (0x2 << 16)
-#define ATC_SCSIZE_16 (0x3 << 16)
-#define ATC_SCSIZE_32 (0x4 << 16)
-#define ATC_SCSIZE_64 (0x5 << 16)
-#define ATC_SCSIZE_128 (0x6 << 16)
-#define ATC_SCSIZE_256 (0x7 << 16)
-#define ATC_DCSIZE_MASK (0x7 << 20) /* Destination Chunk Transfer Size */
-#define ATC_DCSIZE_1 (0x0 << 20)
-#define ATC_DCSIZE_4 (0x1 << 20)
-#define ATC_DCSIZE_8 (0x2 << 20)
-#define ATC_DCSIZE_16 (0x3 << 20)
-#define ATC_DCSIZE_32 (0x4 << 20)
-#define ATC_DCSIZE_64 (0x5 << 20)
-#define ATC_DCSIZE_128 (0x6 << 20)
-#define ATC_DCSIZE_256 (0x7 << 20)
#endif /* AT_HDMAC_H */
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index b3f7cbd..07eda80 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -664,7 +664,8 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
return NULL;
}
- ctrla = atslave->ctrla;
+ ctrla = ATC_SCSIZE(sconfig->src_maxburst)
+ | ATC_DCSIZE(sconfig->dst_maxburst);
ctrlb = ATC_IEN;
switch (direction) {
@@ -792,12 +793,12 @@ atc_dma_cyclic_fill_desc(struct dma_chan *chan, struct at_desc *desc,
enum dma_transfer_direction direction)
{
struct at_dma_chan *atchan = to_at_dma_chan(chan);
- struct at_dma_slave *atslave = chan->private;
struct dma_slave_config *sconfig = &atchan->dma_sconfig;
u32 ctrla;
/* prepare common CRTLA value */
- ctrla = atslave->ctrla
+ ctrla = ATC_SCSIZE(sconfig->src_maxburst)
+ | ATC_DCSIZE(sconfig->dst_maxburst)
| ATC_DST_WIDTH(reg_width)
| ATC_SRC_WIDTH(reg_width)
| period_len >> reg_width;
diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h
index 897a8bc..8a6c8e8 100644
--- a/drivers/dma/at_hdmac_regs.h
+++ b/drivers/dma/at_hdmac_regs.h
@@ -87,7 +87,26 @@
/* Bitfields in CTRLA */
#define ATC_BTSIZE_MAX 0xFFFFUL /* Maximum Buffer Transfer Size */
#define ATC_BTSIZE(x) (ATC_BTSIZE_MAX & (x)) /* Buffer Transfer Size */
-/* Chunck Tranfer size definitions are in at_hdmac.h */
+#define ATC_SCSIZE_MASK (0x7 << 16) /* Source Chunk Transfer Size */
+#define ATC_SCSIZE(x) (ATC_SCSIZE_MASK & ((x) << 16))
+#define ATC_SCSIZE_1 (0x0 << 16)
+#define ATC_SCSIZE_4 (0x1 << 16)
+#define ATC_SCSIZE_8 (0x2 << 16)
+#define ATC_SCSIZE_16 (0x3 << 16)
+#define ATC_SCSIZE_32 (0x4 << 16)
+#define ATC_SCSIZE_64 (0x5 << 16)
+#define ATC_SCSIZE_128 (0x6 << 16)
+#define ATC_SCSIZE_256 (0x7 << 16)
+#define ATC_DCSIZE_MASK (0x7 << 20) /* Destination Chunk Transfer Size */
+#define ATC_DCSIZE(x) (ATC_DCSIZE_MASK & ((x) << 20))
+#define ATC_DCSIZE_1 (0x0 << 20)
+#define ATC_DCSIZE_4 (0x1 << 20)
+#define ATC_DCSIZE_8 (0x2 << 20)
+#define ATC_DCSIZE_16 (0x3 << 20)
+#define ATC_DCSIZE_32 (0x4 << 20)
+#define ATC_DCSIZE_64 (0x5 << 20)
+#define ATC_DCSIZE_128 (0x6 << 20)
+#define ATC_DCSIZE_256 (0x7 << 20)
#define ATC_SRC_WIDTH_MASK (0x3 << 24) /* Source Single Transfer Size */
#define ATC_SRC_WIDTH(x) ((x) << 24)
#define ATC_SRC_WIDTH_BYTE (0x0 << 24)
--
1.7.10
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists