linux-kernel - [PATCH v3] watchdog: Quiet down the boot messages

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1339445050-29941-1-git-send-email-dzickus@redhat.com>
Date:	Mon, 11 Jun 2012 16:04:10 -0400
From:	Don Zickus <dzickus@...hat.com>
To:	LKML <linux-kernel@...r.kernel.org>
Cc:	nzimmer@....com, joe@...ches.com, Ingo Molnar <mingo@...nel.org>,
	Andrew Morton <akpm@...ux-foundation.org>,
	Don Zickus <dzickus@...hat.com>
Subject: [PATCH v3] watchdog: Quiet down the boot messages

A bunch of bugzillas have complained how noisy the nmi_watchdog is during
boot-up especially with its expected failure cases (like virt and bios
resource contention).

This is my attempt to quiet them down and keep it less confusing for the end
user.  What I did is print the message for cpu0 and save it for future
comparisons.  If future cpus have an identical message as cpu0, then don't
print the redundant info.  However, if a future cpu has a different message,
happily print that loudly.

Before the change, you would see something like:

    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz stepping 0a
    Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    ... version:                2
    ... bit width:              40
    ... generic registers:      2
    ... value mask:             000000ffffffffff
    ... max period:             000000007fffffff
    ... fixed-purpose events:   3
    ... event mask:             0000000700000003
    NMI watchdog enabled, takes one hw-pmu counter.
    Booting Node   0, Processors  #1
    NMI watchdog enabled, takes one hw-pmu counter.
     #2
    NMI watchdog enabled, takes one hw-pmu counter.
     #3 Ok.
    NMI watchdog enabled, takes one hw-pmu counter.
    Brought up 4 CPUs
    Total of 4 processors activated (22607.24 BogoMIPS).

After the change, it is simplified to:

    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz stepping 0a
    Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    ... version:                2
    ... bit width:              40
    ... generic registers:      2
    ... value mask:             000000ffffffffff
    ... max period:             000000007fffffff
    ... fixed-purpose events:   3
    ... event mask:             0000000700000003
    NMI watchdog enabled, takes one hw-pmu counter.
    Booting Node   0, Processors  #1 #2 #3 Ok.
    Brought up 4 CPUs

V2: little changes based on Joe Perches' feedback
V3: printk cleanup based on Ingo's feedback; checkpatch fix

Reported-and-tested-by: Nathan Zimmer <nzimmer@....com>
Signed-off-by: Don Zickus <dzickus@...hat.com>
---
 kernel/watchdog.c |   21 ++++++++++++++++++++-
 1 files changed, 20 insertions(+), 1 deletions(-)

diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index e5e1d85..74b1e27 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -377,6 +377,13 @@ static int watchdog_nmi_enable(int cpu)
 	struct perf_event_attr *wd_attr;
 	struct perf_event *event = per_cpu(watchdog_ev, cpu);
 
+	/*
+	 * People like the simple clean cpu node info on boot.
+	 * Reduce the watchdog noise by only printing messages
+	 * that are different from what cpu0 displayed.
+	 */
+	static unsigned long cpu0_err;
+
 	/* is it already setup and enabled? */
 	if (event && event->state > PERF_EVENT_STATE_OFF)
 		goto out;
@@ -390,11 +397,23 @@ static int watchdog_nmi_enable(int cpu)
 
 	/* Try to register using hardware perf events */
 	event = perf_event_create_kernel_counter(wd_attr, cpu, NULL, watchdog_overflow_callback, NULL);
+
+	/* save cpu0 error for future comparision */
+	if (cpu == 0 && IS_ERR(event))
+		cpu0_err = PTR_ERR(event);
+
 	if (!IS_ERR(event)) {
-		pr_info("enabled, takes one hw-pmu counter.\n");
+		/* only print for cpu0 or different than cpu0 */
+		if (cpu == 0 || cpu0_err) {
+			pr_info("enabled on all CPUs, permanently consumes ");
+			pr_cont("one hw-PMU counter.\n");
+		}
 		goto out_save;
 	}
 
+	/* skip displaying the same error again */
+	if (cpu > 0 && (PTR_ERR(event) == cpu0_err))
+		return PTR_ERR(event);
 
 	/* vary the KERN level based on the returned errno */
 	if (PTR_ERR(event) == -EOPNOTSUPP)
-- 
1.7.7.6

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/