| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1339711676-3488-1-git-send-email-prakity@marvell.com>
Date: Thu, 14 Jun 2012 15:07:56 -0700
From: Philip Rakity <philipspatches@...il.com>
To: linux-kernel@...r.kernel.org, broonie@...nsource.wolfsonmicro.com
Cc: linux-mmc@...r.kernel.org, Philip Rakity <prakity@...vell.com>
Subject: [PATCH 2/2] regulator: core.c Only delay when setting voltage requires this
minor optimization: move delay code to where delay is set and
thus where it is used vs in the main line path.
Signed-off-by: Philip Rakity <prakity@...vell.com>
---
drivers/regulator/core.c | 14 +++++++-------
1 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 5b04916..4407ed2 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2166,14 +2166,14 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
delay);
delay = 0;
}
- }
- /* Insert any necessary delays */
- if (delay >= 1000) {
- mdelay(delay / 1000);
- udelay(delay % 1000);
- } else if (delay) {
- udelay(delay);
+ /* Insert any necessary delays */
+ if (delay >= 1000) {
+ mdelay(delay / 1000);
+ udelay(delay % 1000);
+ } else if (delay) {
+ udelay(delay);
+ }
}
if (ret == 0 && best_val >= 0)
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists