[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <4FFBE8C8.9090908@ti.com>
Date: Tue, 10 Jul 2012 14:03:12 +0530
From: Rajendra Nayak <rnayak@...com>
To: "ABRAHAM, KISHON VIJAY" <kishon@...com>
CC: grant.likely@...retlab.ca, rob.herring@...xeda.com,
rob@...dley.net, linux@....linux.org.uk,
gregkh@...uxfoundation.org, b-cousson@...com, tony@...mide.com,
devicetree-discuss@...ts.ozlabs.org, linux-doc@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
balbi@...com, linux-omap@...r.kernel.org,
linux-usb@...r.kernel.org, hvaibhav@...com
Subject: Re: [PATCH v1 11/11] arm: omap: phy: remove unused functions from
omap-phy-internal.c
On Tuesday 10 July 2012 01:46 PM, ABRAHAM, KISHON VIJAY wrote:
> Hi,
>
> On Tue, Jul 10, 2012 at 11:59 AM, Rajendra Nayak<rnayak@...com> wrote:
>> On Thursday 28 June 2012 05:21 PM, Kishon Vijay Abraham I wrote:
>>>
>>> All the unnessary functions in omap-phy-internal is removed.
>>> These functionality are now handled by omap-usb2 phy driver.
>>>
>>> Cc: Felipe Balbi<balbi@...com>
>>> Signed-off-by: Kishon Vijay Abraham I<kishon@...com>
>>> Acked-by: Tony Lindgren<tony@...mide.com>
>>> ---
>>> arch/arm/mach-omap2/omap_phy_internal.c | 138
>>> -------------------------------
>>> arch/arm/mach-omap2/twl-common.c | 5 -
>>> arch/arm/mach-omap2/usb-musb.c | 3 -
>>> 3 files changed, 0 insertions(+), 146 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-omap2/omap_phy_internal.c
>>> b/arch/arm/mach-omap2/omap_phy_internal.c
>>> index 4c90477..0c610b4 100644
>>> --- a/arch/arm/mach-omap2/omap_phy_internal.c
>>> +++ b/arch/arm/mach-omap2/omap_phy_internal.c
>>> @@ -31,144 +31,6 @@
>>> #include<plat/usb.h>
>>> #include "control.h"
>>>
>>> -/* OMAP control module register for UTMI PHY */
>>> -#define CONTROL_DEV_CONF 0x300
>>> -#define PHY_PD 0x1
>>> -
>>> -#define USBOTGHS_CONTROL 0x33c
>>> -#define AVALID BIT(0)
>>> -#define BVALID BIT(1)
>>> -#define VBUSVALID BIT(2)
>>> -#define SESSEND BIT(3)
>>> -#define IDDIG BIT(4)
>>> -
>>> -static struct clk *phyclk, *clk48m, *clk32k;
>>> -static void __iomem *ctrl_base;
>>> -static int usbotghs_control;
>>> -
>>> -int omap4430_phy_init(struct device *dev)
>>> -{
>>> - ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K);
>>> - if (!ctrl_base) {
>>> - pr_err("control module ioremap failed\n");
>>> - return -ENOMEM;
>>> - }
>>> - /* Power down the phy */
>>> - __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
>>
>>
>> Just checking, but I hope your new driver handles this too.
>> You might not see any issues with it now, but not doing this could
>> gate OMAP hitting low power in idle.
>
> I power down the phy during probe in omap-usb2 phy driver.
ok, thanks, good to know.
>
> Thanks
> Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists