| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <502ABE79.7020306@kernel.org>
Date: Tue, 14 Aug 2012 22:09:13 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: "Kim, Milo" <Milo.Kim@...com>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-iio@...r.kernel.org" <linux-iio@...r.kernel.org>,
"sameo@...ux.intel.com" <sameo@...ux.intel.com>
Subject: Re: [PATCH v2] iio: adc: add new lp8788 adc driver
On 08/10/2012 08:06 AM, Kim, Milo wrote:
> Patch v2.
> (a) Use iio_priv() for private data rather than allocating data
> (b) Support raw and scale inferface for iio consumer
> (c) Make inline function for lp8788_adc_read_raw()
> (d) For better readability, use fixed number for shift and mask
> rather than getting bits from channel scan type
> (e) Clean up the iio channel spec macro and use LP8788_CHAN(id, type) macro
>
One last thing.. You are still allocating the wrong size with iio_device_alloc.
> Signed-off-by: Milo(Woogyom) Kim <milo.kim@...com>
> ---
> drivers/iio/adc/Kconfig | 6 +
> drivers/iio/adc/Makefile | 1 +
> drivers/iio/adc/lp8788_adc.c | 223 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 230 insertions(+), 0 deletions(-)
> create mode 100644 drivers/iio/adc/lp8788_adc.c
>
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index 8a78b4f..30c06ed 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -22,4 +22,10 @@ config AT91_ADC
> help
> Say yes here to build support for Atmel AT91 ADC.
>
> +config LP8788_ADC
> + bool "LP8788 ADC driver"
> + depends on MFD_LP8788
> + help
> + Say yes here to build support for TI LP8788 ADC.
> +
> endmenu
> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index 52eec25..72f9a76 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -4,3 +4,4 @@
>
> obj-$(CONFIG_AD7266) += ad7266.o
> obj-$(CONFIG_AT91_ADC) += at91_adc.o
> +obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
> diff --git a/drivers/iio/adc/lp8788_adc.c b/drivers/iio/adc/lp8788_adc.c
> new file mode 100644
> index 0000000..7265080
> --- /dev/null
> +++ b/drivers/iio/adc/lp8788_adc.c
> @@ -0,0 +1,223 @@
> +/*
> + * TI LP8788 MFD - ADC driver
> + *
> + * Copyright 2012 Texas Instruments
> + *
> + * Author: Milo(Woogyom) Kim <milo.kim@...com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
nitpick of the day. Unnecessary blank line.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/err.h>
> +#include <linux/platform_device.h>
> +#include <linux/delay.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/driver.h>
> +#include <linux/mfd/lp8788.h>
> +
> +/* register address */
> +#define LP8788_ADC_CONF 0x60
> +#define LP8788_ADC_RAW 0x61
> +#define LP8788_ADC_DONE 0x63
> +
> +#define START_ADC_CHANNEL LPADC_VBATT_5P5
> +#define END_ADC_CHANNEL LPADC_MAX
> +#define ADC_CONV_START 1
> +#define ADC_CONV_DELAY_US 100
> +
> +struct lp8788_adc {
> + struct lp8788 *lp;
> +};
> +
> +static const int adc_const[LPADC_MAX] = {
> + [LPADC_VBATT_5P5] = 1343,
> + [LPADC_VIN_CHG] = 3052,
> + [LPADC_IBATT] = 610,
> + [LPADC_IC_TEMP] = 610,
> + [LPADC_VBATT_6P0] = 1465,
> + [LPADC_VBATT_5P0] = 1221,
> + [LPADC_ADC1] = 610,
> + [LPADC_ADC2] = 610,
> + [LPADC_VDD] = 1025,
> + [LPADC_VCOIN] = 757,
> + [LPADC_VDD_LDO] = 610,
> + [LPADC_ADC3] = 610,
> + [LPADC_ADC4] = 610,
> +};
> +
> +static inline int lp8788_adc_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long mask)
> +{
> + struct lp8788_adc *adc = iio_priv(indio_dev);
> + int retry = 5;
> + unsigned int msb, lsb, result;
> + u8 data, rawdata[2];
> + int size = ARRAY_SIZE(rawdata);
> + enum lp8788_adc_id id = chan->channel;
> +
> + data = (id << 1) | ADC_CONV_START;
> + if (lp8788_write_byte(adc->lp, LP8788_ADC_CONF, data))
> + goto err;
> +
> + /* retry until adc conversion is done */
> + data = 0;
> + while (retry--) {
> + udelay(ADC_CONV_DELAY_US);
> +
> + if (lp8788_read_byte(adc->lp, LP8788_ADC_DONE, &data))
> + goto err;
> +
> + /* conversion done */
> + if (data)
> + break;
> + }
> +
> + if (lp8788_read_multi_bytes(adc->lp, LP8788_ADC_RAW, rawdata, size))
> + goto err;
> +
> + msb = (rawdata[0] << 4) & 0x00000ff0;
> + lsb = (rawdata[1] >> 4) & 0x0000000f;
> + result = msb | lsb;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + *val = result;
> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_SCALE:
> + *val = adc_const[id] * ((result * 1000 + 500) / 1000);
> + *val2 = 0;
> + return IIO_VAL_INT_PLUS_MICRO;
> + default:
> + break;
> + }
> +
> +err:
> + return -EINVAL;
> +}
> +
> +static const struct iio_info lp8788_adc_info = {
> + .read_raw = &lp8788_adc_read_raw,
> + .driver_module = THIS_MODULE,
> +};
> +
> +#define LP8788_CHAN(_id, _type) { \
> + .type = _type, \
> + .indexed = 1, \
> + .channel = LPADC_##_id, \
> + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
> + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \
> + .address = LP8788_ADC_RAW, \
> + .scan_type = IIO_ST('u', 8, 12, 4), \
> + .scan_index = 1, \
> + .datasheet_name = #_id, \
> +}
> +
> +static struct iio_chan_spec lp8788_adc_channels[] = {
> + [LPADC_VBATT_5P5] = LP8788_CHAN(VBATT_5P5, IIO_VOLTAGE),
> + [LPADC_VIN_CHG] = LP8788_CHAN(VIN_CHG, IIO_VOLTAGE),
> + [LPADC_IBATT] = LP8788_CHAN(IBATT, IIO_CURRENT),
> + [LPADC_IC_TEMP] = LP8788_CHAN(IC_TEMP, IIO_TEMP),
> + [LPADC_VBATT_6P0] = LP8788_CHAN(VBATT_6P0, IIO_VOLTAGE),
> + [LPADC_VBATT_5P0] = LP8788_CHAN(VBATT_5P0, IIO_VOLTAGE),
> + [LPADC_ADC1] = LP8788_CHAN(ADC1, IIO_VOLTAGE),
> + [LPADC_ADC2] = LP8788_CHAN(ADC2, IIO_VOLTAGE),
> + [LPADC_VDD] = LP8788_CHAN(VDD, IIO_VOLTAGE),
> + [LPADC_VCOIN] = LP8788_CHAN(VCOIN, IIO_VOLTAGE),
> + [LPADC_VDD_LDO] = LP8788_CHAN(VDD_LDO, IIO_VOLTAGE),
> + [LPADC_ADC3] = LP8788_CHAN(ADC3, IIO_VOLTAGE),
> + [LPADC_ADC4] = LP8788_CHAN(ADC4, IIO_VOLTAGE),
> +};
> +
> +static int __devinit lp8788_adc_probe(struct platform_device *pdev)
> +{
> + struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
> + struct iio_dev *indio_dev;
> + struct iio_map *map;
> + struct lp8788_adc *adc;
> + int i, ret;
> +
> + indio_dev = iio_device_alloc(sizeof(struct iio_dev));
indio_dev = iio_device_alloc(sizeof(*adc));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + adc = iio_priv(indio_dev);
> + adc->lp = lp;
> + platform_set_drvdata(pdev, indio_dev);
> +
> + if (lp->pdata) {
> + for (i = START_ADC_CHANNEL; i < END_ADC_CHANNEL ; i++) {
> + map = lp->pdata->adc_pdata[i];
> + ret = iio_map_array_register(indio_dev, map);
> + if (ret) {
> + dev_err(lp->dev, "iio map err: %d\n", ret);
> + goto err_iio_map_array;
> + }
> + }
> + }
> +
> + indio_dev->dev.parent = lp->dev;
> + indio_dev->name = pdev->name;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> + indio_dev->info = &lp8788_adc_info;
> + indio_dev->channels = lp8788_adc_channels;
> + indio_dev->num_channels = ARRAY_SIZE(lp8788_adc_channels);
> +
> + ret = iio_device_register(indio_dev);
> + if (ret) {
> + dev_err(lp->dev, "iio dev register err: %d\n", ret);
> + goto err_iio_register;
> + }
> +
> + return 0;
> +
> +err_iio_map_array:
> + while (--i >= START_ADC_CHANNEL) {
> + map = lp->pdata->adc_pdata[i];
> + iio_map_array_unregister(indio_dev, map);
> + }
> +err_iio_register:
> + iio_device_free(indio_dev);
> + return ret;
> +}
> +
> +static int __devexit lp8788_adc_remove(struct platform_device *pdev)
> +{
> + struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> + struct lp8788_adc *adc = iio_priv(indio_dev);
> + struct lp8788 *lp = adc->lp;
> + struct iio_map *map;
> + int i;
> +
> + if (lp->pdata) {
> + for (i = START_ADC_CHANNEL; i < END_ADC_CHANNEL ; i++) {
> + map = lp->pdata->adc_pdata[i];
> + iio_map_array_unregister(indio_dev, map);
> + }
> + }
> +
> + iio_device_unregister(indio_dev);
> + iio_device_free(indio_dev);
> +
> + return 0;
> +}
> +
> +static struct platform_driver lp8788_adc_driver = {
> + .probe = lp8788_adc_probe,
> + .remove = __devexit_p(lp8788_adc_remove),
> + .driver = {
> + .name = LP8788_DEV_ADC,
> + .owner = THIS_MODULE,
> + },
> +};
> +module_platform_driver(lp8788_adc_driver);
> +
> +MODULE_DESCRIPTION("Texas Instruments LP8788 ADC Driver");
> +MODULE_AUTHOR("Milo Kim");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:lp8788-adc");
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists