| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1344994983-9092-1-git-send-email-ying.huang@intel.com>
Date: Wed, 15 Aug 2012 09:43:03 +0800
From: Huang Ying <ying.huang@...el.com>
To: Bjorn Helgaas <bhelgaas@...gle.com>
Cc: linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
linux-pm@...r.kernel.org, "Rafael J. Wysocki" <rjw@...k.pl>,
Huang Ying <ying.huang@...el.com>,
Alan Stern <stern@...land.harvard.edu>
Subject: [UPDATE][PATCH -v3 3/4] PCI/PM: Fix config reg access for D3cold and bridge suspending
This patch fixes the following bug:
http://marc.info/?l=linux-pci&m=134338059022620&w=2
Where lspci does not work properly if a device and the corresponding
parent bridge (such as PCIe port) is suspended. This is because the
device configuration space registers will be not accessible if the
corresponding parent bridge is suspended or the device is put into
D3cold state.
To solve the issue, the bridge/PCIe port connected to the device is
put into active state before read/write configuration space registers.
If the device is in D3cold state, it will be put into active state
too.
To avoid resume/suspend PCIe port for each configuration register
read/write, a small delay is added before the PCIe port to go
suspended.
Reported-by: Bjorn Mork <bjorn@...k.no>
Signed-off-by: Huang Ying <ying.huang@...el.com>
---
drivers/pci/pci-sysfs.c | 42 +++++++++++++++++++++++++++++++++++++++++
drivers/pci/pcie/portdrv_pci.c | 9 ++++++++
2 files changed, 51 insertions(+)
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -458,6 +458,40 @@ boot_vga_show(struct device *dev, struct
}
struct device_attribute vga_attr = __ATTR_RO(boot_vga);
+static void
+pci_config_pm_runtime_get(struct pci_dev *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device *parent = dev->parent;
+
+ if (parent)
+ pm_runtime_get_sync(parent);
+ pm_runtime_get_noresume(dev);
+ /*
+ * pdev->current_state is set to PCI_D3cold during suspending,
+ * so wait until suspending completes
+ */
+ pm_runtime_barrier(dev);
+ /*
+ * Only need to resume devices in D3cold, because config
+ * registers are still accessible for devices suspended but
+ * not in D3cold.
+ */
+ if (pdev->current_state == PCI_D3cold)
+ pm_runtime_resume(dev);
+}
+
+static void
+pci_config_pm_runtime_put(struct pci_dev *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device *parent = dev->parent;
+
+ pm_runtime_put(dev);
+ if (parent)
+ pm_runtime_put_sync(parent);
+}
+
static ssize_t
pci_read_config(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr,
@@ -484,6 +518,8 @@ pci_read_config(struct file *filp, struc
size = count;
}
+ pci_config_pm_runtime_get(dev);
+
if ((off & 1) && size) {
u8 val;
pci_user_read_config_byte(dev, off, &val);
@@ -529,6 +565,8 @@ pci_read_config(struct file *filp, struc
--size;
}
+ pci_config_pm_runtime_put(dev);
+
return count;
}
@@ -549,6 +587,8 @@ pci_write_config(struct file* filp, stru
count = size;
}
+ pci_config_pm_runtime_get(dev);
+
if ((off & 1) && size) {
pci_user_write_config_byte(dev, off, data[off - init_off]);
off++;
@@ -587,6 +627,8 @@ pci_write_config(struct file* filp, stru
--size;
}
+ pci_config_pm_runtime_put(dev);
+
return count;
}
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -140,9 +140,17 @@ static int pcie_port_runtime_resume(stru
{
return 0;
}
+
+static int pcie_port_runtime_idle(struct device *dev)
+{
+ /* Delay for a short while to prevent too frequent suspend/resume */
+ pm_schedule_suspend(dev, 10);
+ return -EBUSY;
+}
#else
#define pcie_port_runtime_suspend NULL
#define pcie_port_runtime_resume NULL
+#define pcie_port_runtime_idle NULL
#endif
static const struct dev_pm_ops pcie_portdrv_pm_ops = {
@@ -155,6 +163,7 @@ static const struct dev_pm_ops pcie_port
.resume_noirq = pcie_port_resume_noirq,
.runtime_suspend = pcie_port_runtime_suspend,
.runtime_resume = pcie_port_runtime_resume,
+ .runtime_idle = pcie_port_runtime_idle,
};
#define PCIE_PORTDRV_PM_OPS (&pcie_portdrv_pm_ops)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists