linux-kernel - Re: [UPDATE][PATCH -v3 3/4] PCI/PM: Fix config reg access for D3cold and bridge suspending

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-Id: <201208152210.35938.rjw@sisk.pl>
Date:	Wed, 15 Aug 2012 22:10:35 +0200
From:	"Rafael J. Wysocki" <rjw@...k.pl>
To:	Huang Ying <ying.huang@...el.com>
Cc:	Bjorn Helgaas <bhelgaas@...gle.com>, linux-kernel@...r.kernel.org,
	linux-pci@...r.kernel.org, linux-pm@...r.kernel.org,
	Alan Stern <stern@...land.harvard.edu>
Subject: Re: [UPDATE][PATCH -v3 3/4] PCI/PM: Fix config reg access for D3cold and bridge suspending

On Wednesday, August 15, 2012, Huang Ying wrote:
> This patch fixes the following bug:
> 
> http://marc.info/?l=linux-pci&m=134338059022620&w=2
> 
> Where lspci does not work properly if a device and the corresponding
> parent bridge (such as PCIe port) is suspended.  This is because the
> device configuration space registers will be not accessible if the
> corresponding parent bridge is suspended or the device is put into
> D3cold state.
> 
> To solve the issue, the bridge/PCIe port connected to the device is
> put into active state before read/write configuration space registers.
> If the device is in D3cold state, it will be put into active state
> too.
> 
> To avoid resume/suspend PCIe port for each configuration register
> read/write, a small delay is added before the PCIe port to go
> suspended.
> 
> Reported-by: Bjorn Mork <bjorn@...k.no>
> Signed-off-by: Huang Ying <ying.huang@...el.com>

Reviewed-by: Rafael J. Wysocki <rjw@...k.pl>

Although the delay might have been #defined.

> ---
>  drivers/pci/pci-sysfs.c        |   42 +++++++++++++++++++++++++++++++++++++++++
>  drivers/pci/pcie/portdrv_pci.c |    9 ++++++++
>  2 files changed, 51 insertions(+)
> 
> --- a/drivers/pci/pci-sysfs.c
> +++ b/drivers/pci/pci-sysfs.c
> @@ -458,6 +458,40 @@ boot_vga_show(struct device *dev, struct
>  }
>  struct device_attribute vga_attr = __ATTR_RO(boot_vga);
>  
> +static void
> +pci_config_pm_runtime_get(struct pci_dev *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct device *parent = dev->parent;
> +
> +	if (parent)
> +		pm_runtime_get_sync(parent);
> +	pm_runtime_get_noresume(dev);
> +	/*
> +	 * pdev->current_state is set to PCI_D3cold during suspending,
> +	 * so wait until suspending completes
> +	 */
> +	pm_runtime_barrier(dev);
> +	/*
> +	 * Only need to resume devices in D3cold, because config
> +	 * registers are still accessible for devices suspended but
> +	 * not in D3cold.
> +	 */
> +	if (pdev->current_state == PCI_D3cold)
> +		pm_runtime_resume(dev);
> +}
> +
> +static void
> +pci_config_pm_runtime_put(struct pci_dev *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct device *parent = dev->parent;
> +
> +	pm_runtime_put(dev);
> +	if (parent)
> +		pm_runtime_put_sync(parent);
> +}
> +
>  static ssize_t
>  pci_read_config(struct file *filp, struct kobject *kobj,
>  		struct bin_attribute *bin_attr,
> @@ -484,6 +518,8 @@ pci_read_config(struct file *filp, struc
>  		size = count;
>  	}
>  
> +	pci_config_pm_runtime_get(dev);
> +
>  	if ((off & 1) && size) {
>  		u8 val;
>  		pci_user_read_config_byte(dev, off, &val);
> @@ -529,6 +565,8 @@ pci_read_config(struct file *filp, struc
>  		--size;
>  	}
>  
> +	pci_config_pm_runtime_put(dev);
> +
>  	return count;
>  }
>  
> @@ -549,6 +587,8 @@ pci_write_config(struct file* filp, stru
>  		count = size;
>  	}
>  	
> +	pci_config_pm_runtime_get(dev);
> +
>  	if ((off & 1) && size) {
>  		pci_user_write_config_byte(dev, off, data[off - init_off]);
>  		off++;
> @@ -587,6 +627,8 @@ pci_write_config(struct file* filp, stru
>  		--size;
>  	}
>  
> +	pci_config_pm_runtime_put(dev);
> +
>  	return count;
>  }
>  
> --- a/drivers/pci/pcie/portdrv_pci.c
> +++ b/drivers/pci/pcie/portdrv_pci.c
> @@ -140,9 +140,17 @@ static int pcie_port_runtime_resume(stru
>  {
>  	return 0;
>  }
> +
> +static int pcie_port_runtime_idle(struct device *dev)
> +{
> +	/* Delay for a short while to prevent too frequent suspend/resume */
> +	pm_schedule_suspend(dev, 10);
> +	return -EBUSY;
> +}
>  #else
>  #define pcie_port_runtime_suspend	NULL
>  #define pcie_port_runtime_resume	NULL
> +#define pcie_port_runtime_idle		NULL
>  #endif
>  
>  static const struct dev_pm_ops pcie_portdrv_pm_ops = {
> @@ -155,6 +163,7 @@ static const struct dev_pm_ops pcie_port
>  	.resume_noirq	= pcie_port_resume_noirq,
>  	.runtime_suspend = pcie_port_runtime_suspend,
>  	.runtime_resume = pcie_port_runtime_resume,
> +	.runtime_idle	= pcie_port_runtime_idle,
>  };
>  
>  #define PCIE_PORTDRV_PM_OPS	(&pcie_portdrv_pm_ops)
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/