| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <503343B9.1070104@iki.fi>
Date: Tue, 21 Aug 2012 11:15:53 +0300
From: Antti Palosaari <crope@....fi>
To: Hiroshi Doyu <hdoyu@...dia.com>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
"htl10@...rs.sourceforge.net" <htl10@...rs.sourceforge.net>,
"linux-media@...r.kernel.org" <linux-media@...r.kernel.org>,
"joe@...ches.com" <joe@...ches.com>,
"linux-tegra@...r.kernel.org" <linux-tegra@...r.kernel.org>
Subject: Re: [PATCH 1/1] driver-core: Shut up dev_dbg_reatelimited() without
DEBUG
Hello Hiroshi,
On 08/21/2012 10:02 AM, Hiroshi Doyu wrote:
> Antti Palosaari <crope@....fi> wrote @ Mon, 20 Aug 2012 23:29:34 +0200:
>
>> On 08/20/2012 02:14 PM, Hiroshi Doyu wrote:
>>> Hi Antti,
>>>
>>> Antti Palosaari <crope@....fi> wrote @ Sat, 18 Aug 2012 02:11:56 +0200:
>>>
>>>> On 08/17/2012 09:04 AM, Hiroshi Doyu wrote:
>>>>> dev_dbg_reatelimited() without DEBUG printed "217078 callbacks
>>>>> suppressed". This shouldn't print anything without DEBUG.
>>>>>
>>>>> Signed-off-by: Hiroshi Doyu <hdoyu@...dia.com>
>>>>> Reported-by: Antti Palosaari <crope@....fi>
>>>>> ---
>>>>> include/linux/device.h | 6 +++++-
>>>>> 1 files changed, 5 insertions(+), 1 deletions(-)
>>>>>
>>>>> diff --git a/include/linux/device.h b/include/linux/device.h
>>>>> index eb945e1..d4dc26e 100644
>>>>> --- a/include/linux/device.h
>>>>> +++ b/include/linux/device.h
>>>>> @@ -962,9 +962,13 @@ do { \
>>>>> dev_level_ratelimited(dev_notice, dev, fmt, ##__VA_ARGS__)
>>>>> #define dev_info_ratelimited(dev, fmt, ...) \
>>>>> dev_level_ratelimited(dev_info, dev, fmt, ##__VA_ARGS__)
>>>>> +#if defined(DEBUG)
>>>>> #define dev_dbg_ratelimited(dev, fmt, ...) \
>>>>> dev_level_ratelimited(dev_dbg, dev, fmt, ##__VA_ARGS__)
>>>>> -
>>>>> +#else
>>>>> +#define dev_dbg_ratelimited(dev, fmt, ...) \
>>>>> + no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
>>>>> +#endif
>>>>> /*
>>>>> * Stupid hackaround for existing uses of non-printk uses dev_info
>>>>> *
>>>>>
>>>>
>>>> NACK. I don't think that's correct behavior. After that patch it kills
>>>> all output of dev_dbg_ratelimited(). If I use dynamic debugs and order
>>>> debugs, I expect to see debugs as earlier.
>>>
>>> You are right. I attached the update patch, just moving *_ratelimited
>>> functions after dev_dbg() definitions.
>>>
>>> With DEBUG defined/undefined in your "test.ko", it works fine. With
>>> CONFIG_DYNAMIC_DEBUG, it works with "+p", but with "-p", still
>>> "..callbacks suppressed" is printed.
>>
>> I am using dynamic debugs and behavior is now just same as it was when
>> reported that bug. OK, likely for static debug it is now correct.
>
> The following patch can also refrain "..callbacks suppressed" with
> "-p". I think that it's ok for all cases.
>
>>>From b4c6aa9160f03b61ed17975c73db36c983a48927 Mon Sep 17 00:00:00 2001
> From: Hiroshi Doyu <hdoyu@...dia.com>
> Date: Mon, 20 Aug 2012 13:49:19 +0300
> Subject: [v3 1/1] driver-core: Shut up dev_dbg_reatelimited() without DEBUG
>
> dev_dbg_reatelimited() without DEBUG printed "217078 callbacks
> suppressed". This shouldn't print anything without DEBUG.
>
> With CONFIG_DYNAMIC_DEBUG, the print should be configured as expected.
>
> Signed-off-by: Hiroshi Doyu <hdoyu@...dia.com>
> Reported-by: Antti Palosaari <crope@....fi>
> ---
> include/linux/device.h | 62 +++++++++++++++++++++++++++++------------------
> 1 files changed, 38 insertions(+), 24 deletions(-)
>
> diff --git a/include/linux/device.h b/include/linux/device.h
> index 9648331..bb6ffcb 100644
> --- a/include/linux/device.h
> +++ b/include/linux/device.h
> @@ -932,6 +932,32 @@ int _dev_info(const struct device *dev, const char *fmt, ...)
>
> #endif
>
> +/*
> + * Stupid hackaround for existing uses of non-printk uses dev_info
> + *
> + * Note that the definition of dev_info below is actually _dev_info
> + * and a macro is used to avoid redefining dev_info
> + */
> +
> +#define dev_info(dev, fmt, arg...) _dev_info(dev, fmt, ##arg)
> +
> +#if defined(CONFIG_DYNAMIC_DEBUG)
> +#define dev_dbg(dev, format, ...) \
> +do { \
> + dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \
> +} while (0)
> +#elif defined(DEBUG)
> +#define dev_dbg(dev, format, arg...) \
> + dev_printk(KERN_DEBUG, dev, format, ##arg)
> +#else
> +#define dev_dbg(dev, format, arg...) \
> +({ \
> + if (0) \
> + dev_printk(KERN_DEBUG, dev, format, ##arg); \
> + 0; \
> +})
> +#endif
> +
> #define dev_level_ratelimited(dev_level, dev, fmt, ...) \
> do { \
> static DEFINE_RATELIMIT_STATE(_rs, \
> @@ -955,33 +981,21 @@ do { \
> dev_level_ratelimited(dev_notice, dev, fmt, ##__VA_ARGS__)
> #define dev_info_ratelimited(dev, fmt, ...) \
> dev_level_ratelimited(dev_info, dev, fmt, ##__VA_ARGS__)
> +#if defined(CONFIG_DYNAMIC_DEBUG) || defined(DEBUG)
> #define dev_dbg_ratelimited(dev, fmt, ...) \
> - dev_level_ratelimited(dev_dbg, dev, fmt, ##__VA_ARGS__)
> -
> -/*
> - * Stupid hackaround for existing uses of non-printk uses dev_info
> - *
> - * Note that the definition of dev_info below is actually _dev_info
> - * and a macro is used to avoid redefining dev_info
> - */
> -
> -#define dev_info(dev, fmt, arg...) _dev_info(dev, fmt, ##arg)
> -
> -#if defined(CONFIG_DYNAMIC_DEBUG)
> -#define dev_dbg(dev, format, ...) \
> -do { \
> - dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \
> +do { \
> + static DEFINE_RATELIMIT_STATE(_rs, \
> + DEFAULT_RATELIMIT_INTERVAL, \
> + DEFAULT_RATELIMIT_BURST); \
> + DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \
> + if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT) && \
> + __ratelimit(&_rs)) \
> + __dynamic_pr_debug(&descriptor, pr_fmt(fmt), \
> + ##__VA_ARGS__); \
> } while (0)
> -#elif defined(DEBUG)
> -#define dev_dbg(dev, format, arg...) \
> - dev_printk(KERN_DEBUG, dev, format, ##arg)
> #else
> -#define dev_dbg(dev, format, arg...) \
> -({ \
> - if (0) \
> - dev_printk(KERN_DEBUG, dev, format, ##arg); \
> - 0; \
> -})
> +#define dev_dbg_ratelimited(dev, fmt, ...) \
> + no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
> #endif
>
> #ifdef VERBOSE_DEBUG
That seems to work correctly now. I tested it using dynamic debugs. It
was Hin-Tak who originally reported that bug for me after I added few
ratelimited debugs for DVB stack. Thank you!
Reported-by: Hin-Tak Leung <htl10@...rs.sourceforge.net>
Tested-by: Antti Palosaari <crope@....fi>
regards
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists