| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5034E532.8090207@users.sourceforge.net>
Date: Wed, 22 Aug 2012 14:57:06 +0100
From: Hin-Tak Leung <htl10@...rs.sourceforge.net>
To: Antti Palosaari <crope@....fi>
CC: Hiroshi Doyu <hdoyu@...dia.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
"linux-media@...r.kernel.org" <linux-media@...r.kernel.org>,
"joe@...ches.com" <joe@...ches.com>,
"linux-tegra@...r.kernel.org" <linux-tegra@...r.kernel.org>
Subject: Re: [PATCH 1/1] driver-core: Shut up dev_dbg_reatelimited() without
DEBUG
Antti Palosaari wrote:
> Hello Hiroshi,
>
> On 08/21/2012 10:02 AM, Hiroshi Doyu wrote:
>> Antti Palosaari <crope@....fi> wrote @ Mon, 20 Aug 2012 23:29:34 +0200:
>>
>>> On 08/20/2012 02:14 PM, Hiroshi Doyu wrote:
>>>> Hi Antti,
>>>>
>>>> Antti Palosaari <crope@....fi> wrote @ Sat, 18 Aug 2012 02:11:56 +0200:
>>>>
>>>>> On 08/17/2012 09:04 AM, Hiroshi Doyu wrote:
>>>>>> dev_dbg_reatelimited() without DEBUG printed "217078 callbacks
>>>>>> suppressed". This shouldn't print anything without DEBUG.
>>>>>>
>>>>>> Signed-off-by: Hiroshi Doyu <hdoyu@...dia.com>
>>>>>> Reported-by: Antti Palosaari <crope@....fi>
>>>>>> ---
>>>>>> include/linux/device.h | 6 +++++-
>>>>>> 1 files changed, 5 insertions(+), 1 deletions(-)
>>>>>>
>>>>>> diff --git a/include/linux/device.h b/include/linux/device.h
>>>>>> index eb945e1..d4dc26e 100644
>>>>>> --- a/include/linux/device.h
>>>>>> +++ b/include/linux/device.h
>>>>>> @@ -962,9 +962,13 @@ do { \
>>>>>> dev_level_ratelimited(dev_notice, dev, fmt, ##__VA_ARGS__)
>>>>>> #define dev_info_ratelimited(dev, fmt, ...) \
>>>>>> dev_level_ratelimited(dev_info, dev, fmt, ##__VA_ARGS__)
>>>>>> +#if defined(DEBUG)
>>>>>> #define dev_dbg_ratelimited(dev, fmt, ...) \
>>>>>> dev_level_ratelimited(dev_dbg, dev, fmt, ##__VA_ARGS__)
>>>>>> -
>>>>>> +#else
>>>>>> +#define dev_dbg_ratelimited(dev, fmt, ...) \
>>>>>> + no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
>>>>>> +#endif
>>>>>> /*
>>>>>> * Stupid hackaround for existing uses of non-printk uses dev_info
>>>>>> *
>>>>>>
>>>>>
>>>>> NACK. I don't think that's correct behavior. After that patch it kills
>>>>> all output of dev_dbg_ratelimited(). If I use dynamic debugs and order
>>>>> debugs, I expect to see debugs as earlier.
>>>>
>>>> You are right. I attached the update patch, just moving *_ratelimited
>>>> functions after dev_dbg() definitions.
>>>>
>>>> With DEBUG defined/undefined in your "test.ko", it works fine. With
>>>> CONFIG_DYNAMIC_DEBUG, it works with "+p", but with "-p", still
>>>> "..callbacks suppressed" is printed.
>>>
>>> I am using dynamic debugs and behavior is now just same as it was when
>>> reported that bug. OK, likely for static debug it is now correct.
>>
>> The following patch can also refrain "..callbacks suppressed" with
>> "-p". I think that it's ok for all cases.
>>
>>> From b4c6aa9160f03b61ed17975c73db36c983a48927 Mon Sep 17 00:00:00 2001
>> From: Hiroshi Doyu <hdoyu@...dia.com>
>> Date: Mon, 20 Aug 2012 13:49:19 +0300
>> Subject: [v3 1/1] driver-core: Shut up dev_dbg_reatelimited() without DEBUG
>>
>> dev_dbg_reatelimited() without DEBUG printed "217078 callbacks
>> suppressed". This shouldn't print anything without DEBUG.
>>
>> With CONFIG_DYNAMIC_DEBUG, the print should be configured as expected.
>>
>> Signed-off-by: Hiroshi Doyu <hdoyu@...dia.com>
>> Reported-by: Antti Palosaari <crope@....fi>
>> ---
>> include/linux/device.h | 62 +++++++++++++++++++++++++++++------------------
>> 1 files changed, 38 insertions(+), 24 deletions(-)
>>
>> diff --git a/include/linux/device.h b/include/linux/device.h
>> index 9648331..bb6ffcb 100644
>> --- a/include/linux/device.h
>> +++ b/include/linux/device.h
>> @@ -932,6 +932,32 @@ int _dev_info(const struct device *dev, const char *fmt,
>> ...)
>>
>> #endif
>>
>> +/*
>> + * Stupid hackaround for existing uses of non-printk uses dev_info
>> + *
>> + * Note that the definition of dev_info below is actually _dev_info
>> + * and a macro is used to avoid redefining dev_info
>> + */
>> +
>> +#define dev_info(dev, fmt, arg...) _dev_info(dev, fmt, ##arg)
>> +
>> +#if defined(CONFIG_DYNAMIC_DEBUG)
>> +#define dev_dbg(dev, format, ...) \
>> +do { \
>> + dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \
>> +} while (0)
>> +#elif defined(DEBUG)
>> +#define dev_dbg(dev, format, arg...) \
>> + dev_printk(KERN_DEBUG, dev, format, ##arg)
>> +#else
>> +#define dev_dbg(dev, format, arg...) \
>> +({ \
>> + if (0) \
>> + dev_printk(KERN_DEBUG, dev, format, ##arg); \
>> + 0; \
>> +})
>> +#endif
>> +
>> #define dev_level_ratelimited(dev_level, dev, fmt, ...) \
>> do { \
>> static DEFINE_RATELIMIT_STATE(_rs, \
>> @@ -955,33 +981,21 @@ do { \
>> dev_level_ratelimited(dev_notice, dev, fmt, ##__VA_ARGS__)
>> #define dev_info_ratelimited(dev, fmt, ...) \
>> dev_level_ratelimited(dev_info, dev, fmt, ##__VA_ARGS__)
>> +#if defined(CONFIG_DYNAMIC_DEBUG) || defined(DEBUG)
>> #define dev_dbg_ratelimited(dev, fmt, ...) \
>> - dev_level_ratelimited(dev_dbg, dev, fmt, ##__VA_ARGS__)
>> -
>> -/*
>> - * Stupid hackaround for existing uses of non-printk uses dev_info
>> - *
>> - * Note that the definition of dev_info below is actually _dev_info
>> - * and a macro is used to avoid redefining dev_info
>> - */
>> -
>> -#define dev_info(dev, fmt, arg...) _dev_info(dev, fmt, ##arg)
>> -
>> -#if defined(CONFIG_DYNAMIC_DEBUG)
>> -#define dev_dbg(dev, format, ...) \
>> -do { \
>> - dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \
>> +do { \
>> + static DEFINE_RATELIMIT_STATE(_rs, \
>> + DEFAULT_RATELIMIT_INTERVAL, \
>> + DEFAULT_RATELIMIT_BURST); \
>> + DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \
>> + if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT) && \
>> + __ratelimit(&_rs)) \
>> + __dynamic_pr_debug(&descriptor, pr_fmt(fmt), \
>> + ##__VA_ARGS__); \
>> } while (0)
>> -#elif defined(DEBUG)
>> -#define dev_dbg(dev, format, arg...) \
>> - dev_printk(KERN_DEBUG, dev, format, ##arg)
>> #else
>> -#define dev_dbg(dev, format, arg...) \
>> -({ \
>> - if (0) \
>> - dev_printk(KERN_DEBUG, dev, format, ##arg); \
>> - 0; \
>> -})
>> +#define dev_dbg_ratelimited(dev, fmt, ...) \
>> + no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
>> #endif
>>
>> #ifdef VERBOSE_DEBUG
>
> That seems to work correctly now. I tested it using dynamic debugs. It was
> Hin-Tak who originally reported that bug for me after I added few ratelimited
> debugs for DVB stack. Thank you!
>
> Reported-by: Hin-Tak Leung <htl10@...rs.sourceforge.net>
> Tested-by: Antti Palosaari <crope@....fi>
>
>
> regards
> Antti
>
This is with mediatree/for_v3.7-8 , playing DVB-T video with mplayer.
echo 'file ...media_build/v4l/usb_urb.c +p' >
/sys/kernel/debug/dynamic_debug/control
With +p
[137749.698202] usb 1-3: usb_urb_complete: bulk urb completed status=0
length=4096/4096 pack_num=0 errors=0
[137749.699449] usb 1-3: usb_urb_complete: bulk urb completed status=0
length=4096/4096 pack_num=0 errors=0
[137749.700825] usb 1-3: usb_urb_complete: bulk urb completed status=0
length=4096/4096 pack_num=0 errors=0
[137754.690862] usb_urb_complete: 3570 callbacks suppressed
[137754.690888] usb 1-3: usb_urb_complete: bulk urb completed status=0
length=4096/4096 pack_num=0 errors=0
[137754.692489] usb 1-3: usb_urb_complete: bulk urb completed status=0
length=4096/4096 pack_num=0 errors=0
[137754.693745] usb 1-3: usb_urb_complete: bulk urb completed status=0
length=4096/4096 pack_num=0 errors=0
[137754.694882] usb 1-3: usb_urb_complete: bulk urb completed status=0
length=4096/4096 pack_num=0 errors=0
[137754.696240] usb 1-3: usb_urb_complete: bulk urb completed status=0
length=4096/4096 pack_num=0 errors=0
[137754.697483] usb 1-3: usb_urb_complete: bulk urb completed status=0
length=4096/4096 pack_num=0 errors=0
[137754.699002] usb 1-3: usb_urb_complete: bulk urb completed status=0
length=4096/4096 pack_num=0 errors=0
[137754.700884] usb 1-3: usb_urb_complete: bulk urb completed status=0
length=4096/4096 pack_num=0 errors=0
[137754.701613] usb 1-3: usb_urb_complete: bulk urb completed status=0
length=4096/4096 pack_num=0 errors=0
[137754.702986] usb 1-3: usb_urb_complete: bulk urb completed status=0
length=4096/4096 pack_num=0 errors=0
[137759.695906] usb_urb_complete: 3595 callbacks suppressed
[137759.695934] usb 1-3: usb_urb_complete: bulk urb completed status=0
length=4096/4096 pack_num=0 errors=0
[137759.697788] usb 1-3: usb_urb_complete: bulk urb completed status=0
length=4096/4096 pack_num=0 errors=0
[137759.698772] usb 1-3: usb_urb_complete: bulk urb completed status=0
length=4096/4096 pack_num=0 errors=0
with -p
[137814.730303] usb_urb_complete: 3555 callbacks suppressed
[137819.740698] usb_urb_complete: 3519 callbacks suppressed
[137824.744857] usb_urb_complete: 3443 callbacks suppressed
[137829.746023] usb_urb_complete: 3345 callbacks suppressed
[137834.749931] usb_urb_complete: 3558 callbacks suppressed
[137839.753102] usb_urb_complete: 3465 callbacks suppressed
[137844.755521] usb_urb_complete: 3438 callbacks suppressed
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists