| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1347357652-23601-1-git-send-email-oskar@scara.com>
Date: 11 Sep 2012 10:00:52 +0000
From: "Oskar Schirmer" <oskar@...ra.com>
To: "Sascha Hauer" <kernel@...gutronix.de>
Cc: linux-kernel@...r.kernel.org, "Oskar Schirmer" <oskar@...ra.com>,
"Wim Van Sebroeck" <wim@...ana.be>,
"Wolfram Sang" <w.sang@...gutronix.de>,
"Sascha Hauer" <kernel@...gutronix.de>,
"Andrew Morton" <akpm@...ux-foundation.org>
Subject: [PATCH v2] watchdog/imx2+: add support for pretimeout interrupt functionality
This watchdog device provides pretimeout facilities:
Set some timeout value and get informed about imminent
watchdog activity thru interrupt.
Allow user to wait for this interrupt thru poll(2),
and to clear it thru read(2).
Signed-off-by: Oskar Schirmer <oskar@...ra.com>
Cc: Wim Van Sebroeck <wim@...ana.be>
Cc: Wolfram Sang <w.sang@...gutronix.de>
Cc: Sascha Hauer <kernel@...gutronix.de>
Cc: Andrew Morton <akpm@...ux-foundation.org>
---
Switched to using devm_request_irq in favour of request_irq
drivers/watchdog/imx2_wdt.c | 128 ++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 127 insertions(+), 1 deletion(-)
diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
index bcfab2b..2a39d7b 100644
--- a/drivers/watchdog/imx2_wdt.c
+++ b/drivers/watchdog/imx2_wdt.c
@@ -21,11 +21,16 @@
*/
#include <linux/init.h>
+#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/platform_device.h>
+#include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
#include <linux/watchdog.h>
#include <linux/clk.h>
#include <linux/fs.h>
@@ -49,6 +54,11 @@
#define IMX2_WDT_WRSR 0x04 /* Reset Status Register */
#define IMX2_WDT_WRSR_TOUT (1 << 1) /* -> Reset due to Timeout */
+#define IMX2_WDT_WICT 0x06 /* Interrupt Control Reg */
+#define IMX2_WDT_WICT_WIE (1 << 15) /* -> Interrupt Enable */
+#define IMX2_WDT_WICT_WTIS (1 << 14) /* -> Timer Interrupt Status */
+#define IMX2_WDT_WICT_WICT (0xFF << 0) /* -> Interrupt Count Timeout */
+
#define IMX2_WDT_MAX_TIME 128
#define IMX2_WDT_DEFAULT_TIME 60 /* in seconds */
@@ -64,6 +74,11 @@ static struct {
unsigned timeout;
unsigned long status;
struct timer_list timer; /* Pings the watchdog when closed */
+ int irq;
+ spinlock_t read_lock;
+ wait_queue_head_t read_q;
+ unsigned char pretimer_once;
+ unsigned char pretimer_data;
} imx2_wdt;
static struct miscdevice imx2_wdt_miscdev;
@@ -81,7 +96,8 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (default="
static const struct watchdog_info imx2_wdt_info = {
.identity = "imx2+ watchdog",
- .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+ .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE |
+ WDIOF_PRETIMEOUT,
};
static inline void imx2_wdt_setup(void)
@@ -148,6 +164,31 @@ static void imx2_wdt_set_timeout(int new_timeout)
__raw_writew(val, imx2_wdt.base + IMX2_WDT_WCR);
}
+static void imx2_wdt_set_pretimeout(int new_pretimeout)
+{
+ u16 val = new_pretimeout;
+
+ if (val > 0)
+ val = (val << 1) | IMX2_WDT_WICT_WIE;
+ __raw_writew(val, imx2_wdt.base + IMX2_WDT_WICT);
+}
+
+static irqreturn_t imx2_wdt_interrupt(int irq, void *arg)
+{
+ u16 val;
+ spin_lock(&imx2_wdt.read_lock);
+ val = __raw_readw(imx2_wdt.base + IMX2_WDT_WICT);
+ if (val & IMX2_WDT_WICT_WTIS) {
+ __raw_writew(val, imx2_wdt.base + IMX2_WDT_WICT);
+ imx2_wdt.pretimer_data = 1;
+ wake_up_interruptible(&imx2_wdt.read_q);
+ spin_unlock(&imx2_wdt.read_lock);
+ return IRQ_HANDLED;
+ }
+ spin_unlock(&imx2_wdt.read_lock);
+ return IRQ_NONE;
+}
+
static int imx2_wdt_open(struct inode *inode, struct file *file)
{
if (test_and_set_bit(IMX2_WDT_STATUS_OPEN, &imx2_wdt.status))
@@ -210,6 +251,26 @@ static long imx2_wdt_ioctl(struct file *file, unsigned int cmd,
case WDIOC_GETTIMEOUT:
return put_user(imx2_wdt.timeout, p);
+ case WDIOC_SETPRETIMEOUT:
+ if (get_user(new_value, p))
+ return -EFAULT;
+ if ((new_value < 0) || (new_value >= IMX2_WDT_MAX_TIME))
+ return -EINVAL;
+ if (imx2_wdt.irq < 0)
+ return -EINVAL;
+ if (imx2_wdt.pretimer_once)
+ return -EPERM;
+ imx2_wdt.pretimer_once = 1;
+ imx2_wdt_set_pretimeout(new_value);
+
+ case WDIOC_GETPRETIMEOUT:
+ val = __raw_readw(imx2_wdt.base + IMX2_WDT_WICT);
+ if (val & IMX2_WDT_WICT_WIE)
+ val = (val & IMX2_WDT_WICT_WICT) >> 1;
+ else
+ val = 0;
+ return put_user(val, p);
+
default:
return -ENOTTY;
}
@@ -237,6 +298,59 @@ static ssize_t imx2_wdt_write(struct file *file, const char __user *data,
return len;
}
+static ssize_t imx2_wdt_read(struct file *file, char __user *data,
+ size_t count, loff_t *ppos)
+{
+ wait_queue_t wait;
+ unsigned long flags;
+
+ if (count <= 0)
+ return 0;
+
+ spin_lock_irqsave(&imx2_wdt.read_lock, flags);
+ while (!imx2_wdt.pretimer_data) {
+ if (file->f_flags & O_NONBLOCK) {
+ spin_unlock_irqrestore(&imx2_wdt.read_lock, flags);
+ return -EAGAIN;
+ }
+
+ init_waitqueue_entry(&wait, current);
+ add_wait_queue(&imx2_wdt.read_q, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+ spin_unlock_irqrestore(&imx2_wdt.read_lock, flags);
+ schedule();
+ spin_lock_irqsave(&imx2_wdt.read_lock, flags);
+ remove_wait_queue(&imx2_wdt.read_q, &wait);
+
+ if (signal_pending(current)) {
+ spin_unlock_irqrestore(&imx2_wdt.read_lock, flags);
+ return -ERESTARTSYS;
+ }
+ }
+
+ imx2_wdt.pretimer_data = 0;
+ spin_unlock_irqrestore(&imx2_wdt.read_lock, flags);
+ if (copy_to_user(data, &imx2_wdt.pretimer_data, 1))
+ return -EFAULT;
+
+ return 1;
+}
+
+static unsigned int imx2_wdt_poll(struct file *file, poll_table *wait)
+{
+ unsigned int mask = 0;
+ unsigned long flags;
+
+ poll_wait(file, &imx2_wdt.read_q, wait);
+
+ spin_lock_irqsave(&imx2_wdt.read_lock, flags);
+ if (imx2_wdt.pretimer_data)
+ mask |= POLLIN | POLLRDNORM;
+ spin_unlock_irqrestore(&imx2_wdt.read_lock, flags);
+
+ return mask;
+}
+
static const struct file_operations imx2_wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
@@ -244,6 +358,8 @@ static const struct file_operations imx2_wdt_fops = {
.open = imx2_wdt_open,
.release = imx2_wdt_close,
.write = imx2_wdt_write,
+ .read = imx2_wdt_read,
+ .poll = imx2_wdt_poll,
};
static struct miscdevice imx2_wdt_miscdev = {
@@ -282,6 +398,16 @@ static int __init imx2_wdt_probe(struct platform_device *pdev)
setup_timer(&imx2_wdt.timer, imx2_wdt_timer_ping, 0);
+ init_waitqueue_head(&imx2_wdt.read_q);
+ spin_lock_init(&imx2_wdt.read_lock);
+ imx2_wdt.irq = platform_get_irq(pdev, 0);
+ if (imx2_wdt.irq >= 0) {
+ ret = devm_request_irq(&pdev->dev, imx2_wdt.irq,
+ imx2_wdt_interrupt, 0, "watchdog", pdev);
+ if (ret)
+ goto fail;
+ }
+
imx2_wdt_miscdev.parent = &pdev->dev;
ret = misc_register(&imx2_wdt_miscdev);
if (ret)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists