linux-kernel - Re: Intel graphics drm issue?

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <507A9550.1060309@cfl.rr.com>
Date:	Sun, 14 Oct 2012 06:34:56 -0400
From:	Mark Hounschell <dmarkh@....rr.com>
To:	Bruno Prémont <bonbons@...ux-vserver.org>
CC:	markh@...pro.net, linux-kernel@...r.kernel.org,
	Intel Graphics Development <intel-gfx@...ts.freedesktop.org>
Subject: Re: Intel graphics drm issue?

On 10/14/2012 04:41 AM, Bruno Prémont wrote:
> Hi Mark,
>
> On Sat, 13 October 2012 Mark Hounschell <dmarkh@....rr.com> wrote:
>> On 10/13/2012 02:57 PM, Mark Hounschell wrote:
>>> On 10/12/2012 05:14 PM, Bruno Prémont wrote:
>>>>> TV - LG 42lb9df
>>>>> PC - intel DH77DF motherboard
>>>>
>>> I have another AMD based PC here with an nvidia card and HDMI port. Using
>>> the nvidia driver, it boots up with no output to the tv until X starts.
>>> Once X starts I get my kdm login screen. All is well except the resolution
>>> is 800x600 and I have no VTs. I suspect if I had a properly configured
>>> xorg.conf file, my resolution would be what I defined in it and work.
>>>
>>> Using the nouveau driver, I get nothing but "no signal" on the tv.  Just
>>> like the the intel box, except no EDID messages in the log file. I've
>>> attached a dmesg outputs for each config.
>>>
>>> Back on the Intel machine. I boot up with a normal monitor connected to the
>>> DVI port of the PC. Then at the kdm login screen, I disconnect the DVI
>>> cable from the PC and connect the TV to the PCs DVI port using a DVI/HDMI
>>> adapter. I get a beautiful 1600x1200 resolution screen on the TV. This does
>>> not happen using the PC HDMI port.
>>>
>>
>> One other thing I failed to mention. If i connect the TV HDMI to the Intel
>> boards DVI port using the adapter, at power up I get all the BIOS messages
>> and can enter the BIOS and all is fine. But when I let it boot all the way
>> up like this, I get nothing but "no signal" after leaving BIOS mode.
>> Turning the tv on/off, cable plug/unplug does not help.
>
> Did you also try the DVI-HDMI adapter cable with the nVidia card?
>

No, I didn't try that. I certainly can though.

> But will all that info I would say the issues is at the side of you TV that
> just does not provide (valid) EDID information, thus the driver does not know
> what the display supports.
>
> The 1600x1200 when switching DVI displays on Intel would seem like the driver
> just kept on display what it had, not reconfiguring anything.
>

Right, that's what I thought was happening. But at least it tells me that 
the tv can in fact "probably" operate in whatever resolution I force it to. 
Is there no way, like in the past we had to do, to just not care what the 
tv/monitor says or does, and just use a fixed resolution?

> For the 800x600 of nVidia, that kind of the default fallback when display
> capabilities are unknown as any remotely recent display should alt least be
> capable to understand that.
>

Yep, that's what I figured here too. nvidia provides a "default/fallback" 
so you can at least access the desktop. Seems a reasonable thing, no?

>
> Your best solution is probably to write an EDID blob (or reuse one you find
> somewhere) that provides at least one mode matching your TV's native mode
> (probably full-HD).
>
> Google suggested the following document:
> http://www.jordansmanuals.com/ServiceManuals%5CLG%5CTV%5CLCD%5C42LB9DF%5C42LB9DF%20Service%20Manual.pdf
> which on page 13/14 shows the full EDID blob for the various HDMI outputs of the
> TV. You may want to read that document, convert the EDID blobs to 512 bytes binary
> files and hell DRM core to use the right one via module/kernel cmdline option:
>
>   drm_kms_helper.edid_firmware=edid/lg42lb9df.edid
> or
>   modprobe drm-kms-helper edid_firmware=edid/lg42lb9df.edid
>
> where
>   /lib/firmware/edid/lg42lb9df.edid
> is the 512-bytes EDID blob created according to data from above manual.
> (note, that will only work for intel, radeon and nouveau drivers but will
>   not work for closed drivers of AMD/nVidia)
>

Thanks for this tip. I will investigate this asap.

> PS: If you didn't already do so, try all of the HDMI connectors or the TV and
> if available, also two distinct HDMI cables of different brand.

Did all that, first thing.

Thanks
Mark



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/