[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1BAFE6F6C881BF42822005164F1491C33EAC0633@DBDE01.ent.ti.com>
Date: Mon, 5 Nov 2012 07:19:33 +0000
From: "Hebbar, Gururaja" <gururaja.hebbar@...com>
To: "Porter, Matt" <mporter@...com>
CC: Linux DaVinci Kernel List
<davinci-linux-open-source@...ux.davincidsp.com>,
Arnd Bergmann <arnd@...db.de>,
Linux Documentation List <linux-doc@...r.kernel.org>,
Devicetree Discuss <devicetree-discuss@...ts.ozlabs.org>,
Linux MMC List <linux-mmc@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Rob Herring <rob.herring@...xeda.com>,
Dan Williams <djbw@...com>,
Linux SPI Devel List
<spi-devel-general@...ts.sourceforge.net>,
Linux OMAP List <linux-omap@...r.kernel.org>,
Linux ARM Kernel List <linux-arm-kernel@...ts.infradead.org>,
Tony Lindgren <tony@...mide.com>,
"Nori, Sekhar" <nsekhar@...com>,
Grant Likely <grant.likely@...retlab.ca>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
"Cousson, Benoit" <b-cousson@...com>,
Russell King <linux@....linux.org.uk>,
Vinod Koul <vinod.koul@...el.com>,
Rob Landley <rob@...dley.net>, Chris Ball <cjb@...top.org>
Subject: RE: [RFC PATCH v3 00/16] DMA Engine support for AM33XX
On Thu, Oct 18, 2012 at 18:56:39, Porter, Matt wrote:
...snip...
...snip...
...snip...
>
> This series adds DMA Engine support for AM33xx, which uses
> an EDMA DMAC. The EDMA DMAC has been previously supported by only
> a private API implementation (much like the situation with OMAP
> DMA) found on the DaVinci family of SoCs.
>
> The series applies on top of 3.7-rc1 and the following patches:
>
> - GPMC fails to reserve memory fix:
> http://www.spinics.net/lists/linux-omap/msg79675.html
> - TPS65910 regulator fix:
> https://patchwork.kernel.org/patch/1593651/
> - dmaengine DT support from Vinod's dmaengine_dt branch in
> git://git.infradead.org/users/vkoul/slave-dma.git since
> 027478851791df751176398be02a3b1c5f6aa824
>
> The approach taken is similar to how OMAP DMA is being converted to
> DMA Engine support. With the functional EDMA private API already
> existing in mach-davinci/dma.c, we first move that to an ARM common
> area so it can be shared. Adding DT and runtime PM support to the
> private EDMA API implementation allows it to run on AM33xx. AM33xx
> *only* boots using DT so we leverage Jon's generic DT DMA helpers to
> register EDMA DMAC with the of_dma framework and then add support
> for calling the dma_request_slave_channel() API to both the mmc
> and spi drivers.
>
> With this series both BeagleBone and the AM335x EVM have working
> MMC and SPI support.
>
> This is tested on BeagleBone with a SPI framebuffer driver and MMC
> rootfs. A trivial gpio DMA event misc driver was used to test the
> crossbar DMA event support. It is also tested on the AM335x EVM
> with the onboard SPI flash and MMC rootfs. The branch at
> https://github.com/ohporter/linux/tree/edma-dmaengine-v3 has the
> complete series, dependencies, and some test drivers/defconfigs.
>
> Regression testing was done on AM180x-EVM (which also makes use
> of the EDMA dmaengine driver and the EDMA private API) using SD,
> SPI flash, and the onboard audio supported by the ASoC Davinci
> driver.
Since you have tested MMC, and probably will be adding Audio support
for AM335x as well, I believe you will also be adding Pin-mux support
for both the modules.
Can you share your plan to release the next version?
I have few patches pending for AM335x Audio (DT related).
Thanks in advance
Regards
Gururaja
>
> After this series, the plan is to convert the last in-tree user
> of the private EDMA API (davinci-pcm/mcasp) and then eliminate
> the private EDMA API by folding its functionality into
> drivers/dma/edma.c.
>
> Matt Porter (16):
> dmaengine: edma: fix slave config dependency on direction
> ARM: davinci: move private EDMA API to arm/common
> ARM: edma: remove unused transfer controller handlers
> ARM: edma: add DT and runtime PM support for AM33XX
> ARM: edma: add AM33XX crossbar event support
> dmaengine: edma: enable build for AM33XX
> dmaengine: edma: Add TI EDMA device tree binding
> ARM: dts: add AM33XX EDMA support
> dmaengine: add dma_request_slave_channel_compat()
> mmc: omap_hsmmc: convert to dma_request_slave_channel_compat()
> mmc: omap_hsmmc: limit max_segs with the EDMA DMAC
> mmc: omap_hsmmc: add generic DMA request support to the DT binding
> ARM: dts: add AM33XX MMC support
> spi: omap2-mcspi: convert to dma_request_slave_channel_compat()
> spi: omap2-mcspi: add generic DMA request support to the DT binding
> ARM: dts: add AM33XX SPI support
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists