| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <518397C60809E147AF5323E0420B992E3E9D6275@DBDE01.ent.ti.com>
Date: Wed, 31 Oct 2012 11:03:51 +0000
From: "Philip, Avinash" <avinashphilip@...com>
To: "Cousson, Benoit" <b-cousson@...com>
CC: "Porter, Matt" <mporter@...com>, Tony Lindgren <tony@...mide.com>,
"Nori, Sekhar" <nsekhar@...com>,
Grant Likely <grant.likely@...retlab.ca>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
Russell King <linux@....linux.org.uk>,
Vinod Koul <vinod.koul@...el.com>,
Rob Landley <rob@...dley.net>, Chris Ball <cjb@...top.org>,
Linux DaVinci Kernel List
<davinci-linux-open-source@...ux.davincidsp.com>,
Arnd Bergmann <arnd@...db.de>,
Linux Documentation List <linux-doc@...r.kernel.org>,
Devicetree Discuss <devicetree-discuss@...ts.ozlabs.org>,
Linux MMC List <linux-mmc@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Rob Herring <rob.herring@...xeda.com>,
Dan Williams <djbw@...com>,
Linux SPI Devel List
<spi-devel-general@...ts.sourceforge.net>,
Linux OMAP List <linux-omap@...r.kernel.org>,
Linux ARM Kernel List <linux-arm-kernel@...ts.infradead.org>
Subject: RE: [RFC PATCH v3 16/16] ARM: dts: add AM33XX SPI support
On Wed, Oct 31, 2012 at 16:05:13, Cousson, Benoit wrote:
>
> On 10/31/2012 11:16 AM, Benoit Cousson wrote:
> > Hi Avinash,
> >
> > On 10/30/2012 10:41 AM, Philip, Avinash wrote:
> >> On Mon, Oct 29, 2012 at 14:40:02, Philip, Avinash wrote:
> >>> On Thu, Oct 18, 2012 at 18:56:55, Porter, Matt wrote:
> >>>> Adds AM33XX SPI support for am335x-bone and am335x-evm.
> >>
> >> Matt,
> >>
> >> Can you build SPI DT patch with DMA support on top of SPI DT patch
> >> I submitted [1]. With the patch [1] SPI can work on PIO mode.
> >> So we can have basic SPI support available in 3.8.
> >>
> >> Benoit,
> >> Can you accept the SPI DT patch [1]
> >
> > Yes, I've just applied it in for_3.8/dts branch
>
> Well, in fact I did not, it does not apply :-(
>
> Can you rebase on top of the for_3.8/dts branch? I've just applied the
> RTC patch on top that was OK.
Ok.
Thanks
Avinash
>
> Thanks,
> Benoit
>
> >
> >> In case if you want I will resubmit a patch with subject line modified.
> >
> > No, that's fine.
> >
> > Thanks,
> > Benoit
> >
> >>
> >> Current subject line
> >> arm/dts: AM33XX: Add SPI device tree data
> >>
> >> 1. https://patchwork.kernel.org/patch/1470661/
> >>
> >> Thanks
> >> Avinash
> >>
> >>>>
> >>>> Signed-off-by: Matt Porter <mporter@...com>
> >>>> ---
> >>>> arch/arm/boot/dts/am335x-bone.dts | 17 +++++++++++++++
> >>>> arch/arm/boot/dts/am335x-evm.dts | 9 ++++++++
> >>>> arch/arm/boot/dts/am33xx.dtsi | 43 +++++++++++++++++++++++++++++++++++++
> >>>> 3 files changed, 69 insertions(+)
> >>>>
> >>>> diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
> >>>> index 5510979..23edfd8 100644
> >>>> --- a/arch/arm/boot/dts/am335x-bone.dts
> >>>> +++ b/arch/arm/boot/dts/am335x-bone.dts
> >>>> @@ -18,6 +18,17 @@
> >>>> reg = <0x80000000 0x10000000>; /* 256 MB */
> >>>> };
> >>>>
> >>>> + am3358_pinmux: pinmux@...10800 {
> >>>> + spi1_pins: pinmux_spi1_pins {
> >>>> + pinctrl-single,pins = <
> >>>> + 0x190 0x13 /* mcasp0_aclkx.spi1_sclk, OUTPUT_PULLUP | MODE3 */
> >>>> + 0x194 0x33 /* mcasp0_fsx.spi1_d0, INPUT_PULLUP | MODE3 */
> >>>> + 0x198 0x13 /* mcasp0_axr0.spi1_d1, OUTPUT_PULLUP | MODE3 */
> >>>> + 0x19c 0x13 /* mcasp0_ahclkr.spi1_cs0, OUTPUT_PULLUP | MODE3 */
> >>>> + >;
> >>>> + };
> >>>> + };
> >>>> +
> >>>
> >>> Change to am33xx_pinmux.
> >>>
> >>>> ocp {
> >>>> uart1: serial@...09000 {
> >>>> status = "okay";
> >>>> @@ -84,3 +95,9 @@
> >>>> &mmc1 {
> >>>> vmmc-supply = <&ldo3_reg>;
> >>>> };
> >>>> +
> >>>> +&spi1 {
> >>>> + status = "okay";
> >>>> + pinctrl-names = "default";
> >>>> + pinctrl-0 = <&spi1_pins>;
> >>>> +};
> >>>> diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
> >>>> index d63fce8..8d5f660 100644
> >>>> --- a/arch/arm/boot/dts/am335x-evm.dts
> >>>> +++ b/arch/arm/boot/dts/am335x-evm.dts
> >>>> @@ -124,3 +124,12 @@
> >>>> &mmc1 {
> >>>> vmmc-supply = <&vmmc_reg>;
> >>>> };
> >>>> +
> >>>> +&spi0 {
> >>>> + status = "okay";
> >>>> + spi-flash@0 {
> >>>> + compatible = "spansion,s25fl064k", "m25p80";
> >>>> + spi-max-frequency = <24000000>;
> >>>> + reg = <0>;
> >>>> + };
> >>>> +};
> >>>
> >>> In AM335x-evm, SPI flash available in profile #2 (am335x evm specific profiles).
> >>> So can you drop this changes as if I understood correctly, am335x-evm.dts will be
> >>> populated for devices present only on profile #0.
> >>>
> >>>> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> >>>> index 26a6af7..063ecea 100644
> >>>> --- a/arch/arm/boot/dts/am33xx.dtsi
> >>>> +++ b/arch/arm/boot/dts/am33xx.dtsi
> >>>> @@ -40,6 +40,15 @@
> >>>> };
> >>>> };
> >>>>
> >>>> + am3358_pinmux: pinmux@...10800 {
> >>>> + compatible = "pinctrl-single";
> >>>> + reg = <0x44e10800 0x0238>;
> >>>> + #address-cells = <1>;
> >>>> + #size-cells = <0>;
> >>>> + pinctrl-single,register-width = <32>;
> >>>> + pinctrl-single,function-mask = <0x7f>;
> >>>> + };
> >>>> +
> >>>
> >>> Pin ctrl support already submitted
> >>> http://git.kernel.org/?p=linux/kernel/git/bcousson/linux-omap-dt.git;a=commitdiff;h=3e0603e905d9ba662e8c1885ecb1d28bc454e448
> >>>
> >>> Thanks
> >>> Avinash
> >>>
> >>>> /*
> >>>> * XXX: Use a flat representation of the AM33XX interconnect.
> >>>> * The real AM33XX interconnect network is quite complex.Since
> >>>> @@ -261,6 +270,40 @@
> >>>> status = "disabled";
> >>>> };
> >>>>
> >>>> + spi0: spi@...30000 {
> >>>> + compatible = "ti,omap4-mcspi";
> >>>> + ti,hwmods = "spi0";
> >>>> + #address-cells = <1>;
> >>>> + #size-cells = <0>;
> >>>> + reg = <0x48030000 0x400>;
> >>>> + interrupt-parent = <&intc>;
> >>>> + interrupt = <65>;
> >>>> + dmas = <&edma 16
> >>>> + &edma 17
> >>>> + &edma 18
> >>>> + &edma 19>;
> >>>> + dma-names = "tx0", "rx0", "tx1", "rx1";
> >>>> + ti,spi-num-cs = <2>;
> >>>> + status = "disabled";
> >>>> + };
> >>>> +
> >>>> + spi1: spi@...a0000 {
> >>>> + compatible = "ti,omap4-mcspi";
> >>>> + ti,hwmods = "spi1";
> >>>> + #address-cells = <1>;
> >>>> + #size-cells = <0>;
> >>>> + reg = <0x481a0000 0x400>;
> >>>> + interrupt-parent = <&intc>;
> >>>> + interrupt = <125>;
> >>>> + dmas = <&edma 42
> >>>> + &edma 43
> >>>> + &edma 44
> >>>> + &edma 45>;
> >>>> + dma-names = "tx0", "rx0", "tx1", "rx1";
> >>>> + ti,spi-num-cs = <2>;
> >>>> + status = "disabled";
> >>>> + };
> >>>> +
> >>>> wdt2: wdt@...35000 {
> >>>> compatible = "ti,omap3-wdt";
> >>>> ti,hwmods = "wd_timer2";
> >>>> --
> >>>> 1.7.9.5
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> linux-arm-kernel mailing list
> >>>> linux-arm-kernel@...ts.infradead.org
> >>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> >>>>
> >>>
> >>>
> >>
> >
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists