| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <3676752.1eMro0Y1EF@segfault.sh0n.net>
Date: Fri, 16 Nov 2012 23:39:51 -0500
From: Shawn Starr <shawn.starr@...ers.com>
To: linux-kernel@...r.kernel.org
Subject: [usb_storage][mmc] - Genesys Logic / SilverStone 6-in-1 Card Reader/Writer - Can't mount storage
Hello kernel folks,
I have an old 2.0 USB card reader, Linux detects the device but is not able to mount the storage device.
I tried it in both a KVM Windows VM and in Linux to mount the storage but device hangs, if I take out card, it detects all 6 device storage capabilities, then it detects the mmc card if i re-insert the card but is unable to mount it.
I am using a MMC adapter that can attach a micro-SD card inside it. This USB card reader/writer device comes with a 3.5" bay slot w/ a USB connector to motherboard and can detached for portable reading.
Anyone seen this problem before? Does it need any quirks used?
Thanks,
Shawn.
--- SNIP ---
Kernel conversation:
[523520.622075] usb 1-1: new high-speed USB device number 8 using ehci_hcd
[523520.749731] usb 1-1: New USB device found, idVendor=05e3, idProduct=0760
[523520.749735] usb 1-1: New USB device strings: Mfr=0, Product=3, SerialNumber=4
[523520.749738] usb 1-1: Product: Flash Reader
[523520.749739] usb 1-1: SerialNumber: 000037
[523520.751674] scsi31 : usb-storage 1-1:1.0
[523521.753494] scsi 31:0:0:0: Direct-Access Generic STORAGE DEVICE 0113 PQ: 0 ANSI: 0
[523521.884032] usb 1-1: reset high-speed USB device number 8 using ehci_hcd
[523522.020128] scsi 31:0:0:1: Direct-Access Generic STORAGE DEVICE 0113 PQ: 0 ANSI: 0
[523522.157055] usb 1-1: reset high-speed USB device number 8 using ehci_hcd
[523522.292672] scsi 31:0:0:2: Direct-Access Generic STORAGE DEVICE 0113 PQ: 0 ANSI: 0
[523522.426047] usb 1-1: reset high-speed USB device number 8 using ehci_hcd
[523522.561250] scsi 31:0:0:3: Direct-Access Generic STORAGE DEVICE 0113 PQ: 0 ANSI: 0
[523522.561828] sd 31:0:0:0: Attached scsi generic sg2 type 0
[523522.562020] sd 31:0:0:1: Attached scsi generic sg3 type 0
[523522.562158] sd 31:0:0:2: Attached scsi generic sg4 type 0
[523522.562294] sd 31:0:0:3: Attached scsi generic sg5 type 0
[523526.062174] usb 1-1: USB disconnect, device number 8
[523526.066148] sd 31:0:0:1: [sdc] READ CAPACITY failed
[523526.066151] sd 31:0:0:1: [sdc]
[523526.066153] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[523526.066154] sd 31:0:0:1: [sdc] Sense not available.
[523526.066162] sd 31:0:0:3: [sde] READ CAPACITY failed
[523526.066164] sd 31:0:0:3: [sde]
[523526.066165] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[523526.066166] sd 31:0:0:3: [sde] Sense not available.
[523526.066180] sd 31:0:0:3: [sde] Write Protect is off
[523526.066181] sd 31:0:0:2: [sdd] READ CAPACITY failed
[523526.066183] sd 31:0:0:2: [sdd]
[523526.066184] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[523526.066185] sd 31:0:0:2: [sdd] Sense not available.
[523526.066187] sd 31:0:0:3: [sde] Mode Sense: 00 00 00 00
[523526.066193] sd 31:0:0:1: [sdc] Write Protect is off
[523526.066195] sd 31:0:0:1: [sdc] Mode Sense: 00 00 00 00
[523526.066201] sd 31:0:0:2: [sdd] Write Protect is on
[523526.066203] sd 31:0:0:2: [sdd] Mode Sense: 90 67 cf b2
[523526.066205] sd 31:0:0:1: [sdc] Asking for cache data failed
[523526.066208] sd 31:0:0:1: [sdc] Assuming drive cache: write through
[523526.066213] sd 31:0:0:2: [sdd] Asking for cache data failed
[523526.066215] sd 31:0:0:2: [sdd] Assuming drive cache: write through
[523526.066261] sd 31:0:0:3: [sde] Asking for cache data failed
[523526.066264] sd 31:0:0:3: [sde] Assuming drive cache: write through
[523526.066411] sd 31:0:0:2: [sdd] READ CAPACITY failed
[523526.066414] sd 31:0:0:2: [sdd]
[523526.066415] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[523526.066416] sd 31:0:0:2: [sdd] Sense not available.
[523526.066450] sd 31:0:0:3: [sde] Attached SCSI removable disk
[523526.066452] sd 31:0:0:2: [sdd] Asking for cache data failed
[523526.066454] sd 31:0:0:2: [sdd] Assuming drive cache: write through
[523526.066456] sd 31:0:0:2: [sdd] Attached SCSI removable disk
[523526.066457] sd 31:0:0:1: [sdc] Attached SCSI removable disk
[523526.072084] sd 31:0:0:0: [sdb] READ CAPACITY failed
[523526.072088] sd 31:0:0:0: [sdb]
[523526.072089] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[523526.072091] sd 31:0:0:0: [sdb] Sense not available.
[523526.072102] sd 31:0:0:0: [sdb] Write Protect is off
[523526.072104] sd 31:0:0:0: [sdb] Mode Sense: 00 00 00 00
[523526.072114] sd 31:0:0:0: [sdb] Asking for cache data failed
[523526.072116] sd 31:0:0:0: [sdb] Assuming drive cache: write through
[523526.072274] sd 31:0:0:0: [sdb] Attached SCSI removable disk
[523526.410077] hub 1-0:1.0: unable to enumerate USB device on port 1
[523527.324054] usb 1-1: new high-speed USB device number 10 using ehci_hcd
[523527.450935] usb 1-1: New USB device found, idVendor=05e3, idProduct=0760
[523527.450941] usb 1-1: New USB device strings: Mfr=0, Product=3, SerialNumber=4
[523527.450944] usb 1-1: Product: Flash Reader
[523527.450947] usb 1-1: SerialNumber: 000037
[523527.453972] scsi32 : usb-storage 1-1:1.0
[523528.458085] scsi 32:0:0:0: Direct-Access Generic STORAGE DEVICE 0113 PQ: 0 ANSI: 0
[523528.598053] usb 1-1: reset high-speed USB device number 10 using ehci_hcd
[523528.735315] scsi 32:0:0:1: Direct-Access Generic STORAGE DEVICE 0113 PQ: 0 ANSI: 0
[523528.876069] usb 1-1: reset high-speed USB device number 10 using ehci_hcd
[523529.011740] scsi 32:0:0:2: Direct-Access Generic STORAGE DEVICE 0113 PQ: 0 ANSI: 0
[523529.157046] usb 1-1: reset high-speed USB device number 10 using ehci_hcd
[523529.292285] scsi 32:0:0:3: Direct-Access Generic STORAGE DEVICE 0113 PQ: 0 ANSI: 0
[523529.293808] sd 32:0:0:0: Attached scsi generic sg2 type 0
[523529.294720] sd 32:0:0:1: Attached scsi generic sg3 type 0
[523529.294926] sd 32:0:0:2: Attached scsi generic sg4 type 0
[523529.295140] sd 32:0:0:3: Attached scsi generic sg5 type 0
[523540.261776] sd 32:0:0:3: [sde] Attached SCSI removable disk
[523540.263276] sd 32:0:0:0: [sdb] Attached SCSI removable disk
[523540.266281] sd 32:0:0:2: [sdd] Attached SCSI removable disk
[523540.269157] sd 32:0:0:1: [sdc] Attached SCSI removable disk
[523548.570730] usb 1-1: USB disconnect, device number 10
[523549.071060] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[523549.203068] usb 3-1: not running at top speed; connect to a high speed hub
[523549.232134] usb 3-1: New USB device found, idVendor=05e3, idProduct=0760
[523549.232139] usb 3-1: New USB device strings: Mfr=0, Product=3, SerialNumber=4
[523549.232141] usb 3-1: Product: Flash Reader
[523549.232143] usb 3-1: SerialNumber: 000037
[523549.235365] scsi33 : usb-storage 3-1:1.0
[523550.241083] scsi 33:0:0:0: Direct-Access Generic STORAGE DEVICE 0113 PQ: 0 ANSI: 0
[523550.558414] sd 33:0:0:0: Attached scsi generic sg2 type 0
[523550.615077] usb 3-1: USB disconnect, device number 2
[523550.618155] sd 33:0:0:0: [sdb] READ CAPACITY failed
[523550.618163] sd 33:0:0:0: [sdb]
[523550.618167] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[523550.618172] sd 33:0:0:0: [sdb] Sense not available.
[523550.618205] sd 33:0:0:0: [sdb] Write Protect is off
[523550.618213] sd 33:0:0:0: [sdb] Mode Sense: 2e 2e 2f 2e
[523550.618242] sd 33:0:0:0: [sdb] No Caching mode page present
[523550.618250] sd 33:0:0:0: [sdb] Assuming drive cache: write through
[523550.618844] sd 33:0:0:0: [sdb] Attached SCSI removable disk
[523550.922034] usb 1-1: new high-speed USB device number 12 using ehci_hcd
[523551.047189] usb 1-1: New USB device found, idVendor=05e3, idProduct=0760
[523551.047199] usb 1-1: New USB device strings: Mfr=0, Product=3, SerialNumber=4
[523551.047206] usb 1-1: Product: Flash Reader
[523551.047212] usb 1-1: SerialNumber: 000037
[523551.051861] scsi34 : usb-storage 1-1:1.0
[523552.055977] scsi 34:0:0:0: Direct-Access Generic STORAGE DEVICE 0113 PQ: 0 ANSI: 0
[523569.565618] usb 1-1: USB disconnect, device number 12
[523569.575466] sd 34:0:0:0: [sdb] READ CAPACITY failed
[523569.575469] sd 34:0:0:0: [sdb]
[523569.575480] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[523569.575481] sd 34:0:0:0: Attached scsi generic sg2 type 0
[523569.575483] sd 34:0:0:0: [sdb] Sense not available.
[523569.575495] sd 34:0:0:0: [sdb] Write Protect is off
[523569.575498] sd 34:0:0:0: [sdb] Mode Sense: 00 00 00 00
[523569.575507] sd 34:0:0:0: [sdb] Asking for cache data failed
[523569.575510] sd 34:0:0:0: [sdb] Assuming drive cache: write through
[523569.575680] sd 34:0:0:0: [sdb] Attached SCSI removable disk
[523569.861038] usb 1-1: new high-speed USB device number 13 using ehci_hcd
[523569.986838] usb 1-1: New USB device found, idVendor=05e3, idProduct=0760
[523569.986842] usb 1-1: New USB device strings: Mfr=0, Product=3, SerialNumber=4
[523569.986844] usb 1-1: Product: Flash Reader
[523569.986846] usb 1-1: SerialNumber: 000037
[523569.988342] scsi35 : usb-storage 1-1:1.0
[523570.077614] usb 1-1: USB disconnect, device number 13
[523595.299062] usb 1-1: new high-speed USB device number 14 using ehci_hcd
[523595.424348] usb 1-1: New USB device found, idVendor=05e3, idProduct=0760
[523595.424352] usb 1-1: New USB device strings: Mfr=0, Product=3, SerialNumber=4
[523595.424355] usb 1-1: Product: Flash Reader
[523595.424356] usb 1-1: SerialNumber: 000037
[523595.426729] scsi36 : usb-storage 1-1:1.0
[523596.429736] scsi 36:0:0:0: Direct-Access Generic STORAGE DEVICE 0113 PQ: 0 ANSI: 0
[523617.863063] usb 1-1: reset high-speed USB device number 14 using ehci_hcd
[523621.740968] scsi 36:0:0:1: Direct-Access Generic STORAGE DEVICE 0113 PQ: 0 ANSI: 0
[523621.741932] scsi 36:0:0:2: Direct-Access Generic STORAGE DEVICE 0113 PQ: 0 ANSI: 0
[523621.742940] scsi 36:0:0:3: Direct-Access Generic STORAGE DEVICE 0113 PQ: 0 ANSI: 0
[523621.744300] sd 36:0:0:0: Attached scsi generic sg2 type 0
[523621.744446] sd 36:0:0:1: Attached scsi generic sg3 type 0
[523621.744583] sd 36:0:0:2: Attached scsi generic sg4 type 0
[523621.744734] sd 36:0:0:3: Attached scsi generic sg5 type 0
[523621.757034] sd 36:0:0:0: [sdb] Attached SCSI removable disk
[523621.758395] sd 36:0:0:1: [sdc] Attached SCSI removable disk
[523621.761447] sd 36:0:0:3: [sde] Attached SCSI removable disk
[523621.762767] sd 36:0:0:2: [sdd] Attached SCSI removable disk
[523656.838441] usb 1-1: reset high-speed USB device number 14 using ehci_hcd
[523667.062048] usb 1-1: reset high-speed USB device number 14 using ehci_hcd
[523683.298058] usb 1-1: reset high-speed USB device number 14 using ehci_hcd
[523683.521031] usb 1-1: reset high-speed USB device number 14 using ehci_hcd
[523693.745044] usb 1-1: reset high-speed USB device number 14 using ehci_hcd
[523693.865954] sd 36:0:0:2: Device offlined - not ready after error recovery
[523724.838041] usb 1-1: reset high-speed USB device number 14 using ehci_hcd
[523735.061056] usb 1-1: reset high-speed USB device number 14 using ehci_hcd
[523751.298075] usb 1-1: reset high-speed USB device number 14 using ehci_hcd
[523751.521348] usb 1-1: reset high-speed USB device number 14 using ehci_hcd
[523761.743090] usb 1-1: reset high-speed USB device number 14 using ehci_hcd
[523761.864031] sd 36:0:0:0: Device offlined - not ready after error recovery
[523792.838062] usb 1-1: reset high-speed USB device number 14 using ehci_hcd
[523803.060051] usb 1-1: reset high-speed USB device number 14 using ehci_hcd
[523806.704141] usb 6-1: USB disconnect, device number 2
[523813.490615] usb 1-1: USB disconnect, device number 14
[523813.494834] sd 36:0:0:1: Device offlined - not ready after error recovery
[523816.661064] usb 1-1: new high-speed USB device number 15 using ehci_hcd
[523816.786331] usb 1-1: New USB device found, idVendor=05e3, idProduct=0760
[523816.786335] usb 1-1: New USB device strings: Mfr=0, Product=3, SerialNumber=4
[523816.786337] usb 1-1: Product: Flash Reader
[523816.786339] usb 1-1: SerialNumber: 000037
[523816.787784] scsi37 : usb-storage 1-1:1.0
[523817.789368] scsi 37:0:0:0: Direct-Access Generic STORAGE DEVICE 0113 PQ: 0 ANSI: 0
[523832.079578] scsi 37:0:0:1: Direct-Access Generic STORAGE DEVICE 0113 PQ: 0 ANSI: 0
[523832.080532] scsi 37:0:0:2: Direct-Access Generic STORAGE DEVICE 0113 PQ: 0 ANSI: 0
[523832.081579] scsi 37:0:0:3: Direct-Access Generic STORAGE DEVICE 0113 PQ: 0 ANSI: 0
[523832.086705] sd 37:0:0:0: Attached scsi generic sg2 type 0
[523832.087311] sd 37:0:0:1: Attached scsi generic sg3 type 0
[523832.087749] sd 37:0:0:2: Attached scsi generic sg4 type 0
[523832.088222] sd 37:0:0:3: Attached scsi generic sg5 type 0
[523832.099628] sd 37:0:0:0: [sdb] Attached SCSI removable disk
[523832.101000] sd 37:0:0:1: [sdc] Attached SCSI removable disk
[523832.102371] sd 37:0:0:2: [sdd] Attached SCSI removable disk
[523832.103751] sd 37:0:0:3: [sde] Attached SCSI removable disk
lsusb:
Bus 001 Device 014: ID 05e3:0760 Genesys Logic, Inc. USB 2.0 Card Reader/Writer
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x05e3 Genesys Logic, Inc.
idProduct 0x0760 USB 2.0 Card Reader/Writer
bcdDevice 1.13
iManufacturer 0
iProduct 3
iSerial 4
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Status: 0x0001
Self Powered
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists