linux-kernel - Re: [GIT PULL] fbdev changes for 3.8

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Mon, 17 Dec 2012 12:05:31 +0200
From:	Felipe Balbi <balbi@...com>
To:	Tony Lindgren <tony@...mide.com>
CC:	Dave Jones <davej@...hat.com>,
	Linus Torvalds <torvalds@...ux-foundation.org>,
	Tomi Valkeinen <tomi.valkeinen@...com>,
	linux-omap <linux-omap@...r.kernel.org>,
	linux-fbdev <linux-fbdev@...r.kernel.org>,
	linux-kernel <linux-kernel@...r.kernel.org>,
	Florian Tobias Schandinat <FlorianSchandinat@....de>,
	Dmitry Torokhov <dmitry.torokhov@...il.com>,
	Felipe Balbi <balbi@...com>,
	Evgeniy Polyakov <zbr@...emap.net>,
	Arnd Bergmann <arnd@...db.de>
Subject: Re: [GIT PULL] fbdev changes for 3.8

Hi,

On Sun, Dec 16, 2012 at 12:35:37PM -0800, Tony Lindgren wrote:
> * Tony Lindgren <tony@...mide.com> [121216 09:49]:
> > * Dave Jones <davej@...hat.com> [121215 14:27]:
> > > On Sat, Dec 15, 2012 at 01:11:04PM -0800, Linus Torvalds wrote:
> > >  > On Fri, Dec 14, 2012 at 2:22 AM, Tomi Valkeinen <tomi.valkeinen@...com> wrote:
> > >  > > Hi Linus,
> > >  > >
> > >  > > Florian, the fbdev maintainer, has been very busy lately, so I offered to send
> > >  > > the pull request for fbdev for this merge window.
> > >  > 
> > >  > Pulled. However, with this I get the Kconfig question
> > >  > 
> > >  >    OMAP2+ Display Subsystem support (OMAP2_DSS) [N/m/y/?] (NEW)
> > >  > 
> > >  > which doesn't make a whole lot of sense on x86-64, unless there's
> > >  > something about OMAP2 that I don't know.
> > >  > 
> > >  > So I'd suggest making that OMAP2_DSS be dependent on OMAP2. Or at
> > >  > least ARM. Because showing it to anybody else seems insane.
> > >  > 
> > >  > Same goes for FB_OMAP2 for that matter. I realize that it's likely
> > >  > nice to get compile testing for this on x86-64 too, but if that's the
> > >  > intent, we need to think about it some more. I don't think it's good
> > >  > to ask actual normal users questions like this just for compile
> > >  > coverage.
> > > 
> > > This OMAP stuff has been creeping into x86 builds for a while.
> > > Grep from my current build config ..
> > > 
> > > # CONFIG_OMAP_OCP2SCP is not set
> > > # CONFIG_KEYBOARD_OMAP4 is not set
> > > # CONFIG_OMAP2_DSS is not set
> > > # CONFIG_OMAP_USB2 is not set
> > > 
> > > There was some other arm-ism that does the same that I' currently forgetting,
> > > or maybe that got fixed..
> > 
> > Those are all omap internal devices and should be all marked with
> > depends on ARCH_OMAP2PLUS.
> > 
> > It's a different story for external devices that may be used on other
> > architectures.
> > 
> > I only came up with one reason to compile internal devices for other
> > architectures: In some cases the driver subsystem maintainer may want to
> > be able to compile test subsystem wide changes without having to compile
> > for each target separately. But for those cases it's trivial to carry a
> > compile test patch that just drops the depends Kconfig entries.
> 
> And here's a patch to limit the omap drivers above to omap only.
> 
> Regards,
> 
> Tony
> 
> 
> From: Tony Lindgren <tony@...mide.com>
> Date: Sun, 16 Dec 2012 12:28:46 -0800
> Subject: [PATCH] ARM: OMAP: Fix drivers to depend on omap for internal devices
> 
> These devices are not available on other architectures, so
> let's limit them to omap.
> 
> If the driver subsystem maintainers want to build test
> system wide changes without building for each target,
> it's easy to carry a test patch that just strips out the
> depends entries from Kconfig files.
> 
> Signed-off-by: Tony Lindgren <tony@...mide.com>
> 
> --- a/drivers/bus/Kconfig
> +++ b/drivers/bus/Kconfig
> @@ -6,6 +6,7 @@ menu "Bus devices"
>  
>  config OMAP_OCP2SCP
>  	tristate "OMAP OCP2SCP DRIVER"
> +	depends on ARCH_OMAP2PLUS
>  	help
>  	  Driver to enable ocp2scp module which transforms ocp interface
>  	  protocol to scp protocol. In OMAP4, USB PHY is connected via
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -544,6 +544,7 @@ config KEYBOARD_OMAP
>  
>  config KEYBOARD_OMAP4
>  	tristate "TI OMAP4+ keypad support"
> +	depends on ARCH_OMAP2PLUS
>  	select INPUT_MATRIXKMAP
>  	help
>  	  Say Y here if you want to use the OMAP4+ keypad.
> --- a/drivers/usb/phy/Kconfig
> +++ b/drivers/usb/phy/Kconfig
> @@ -6,6 +6,7 @@ comment "USB Physical Layer drivers"
>  
>  config OMAP_USB2
>  	tristate "OMAP USB2 PHY Driver"
> +	depends on ARCH_OMAP2PLUS
>  	select USB_OTG_UTILS
>  	help
>  	  Enable this to support the transceiver that is part of SOC. This

for Keypad, PHY and OCP2SCP I would rather not as I want to use
linux-next for compile testing our stuff in all arches.

-- 
balbi

Download attachment "signature.asc" of type "application/pgp-signature" (837 bytes)