| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1357183510-8476-2-git-send-email-linux@prisktech.co.nz>
Date: Thu, 3 Jan 2013 16:25:09 +1300
From: Tony Prisk <linux@...sktech.co.nz>
To: Arnd Bergmann <arnd@...db.de>, Olof Johansson <olof@...om.net>
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
vt8500-wm8505-linux-kernel@...glegroups.com,
Tony Prisk <linux@...sktech.co.nz>,
John Stultz <johnstul@...ibm.com>,
Thomas Gleixner <tglx@...utronix.de>
Subject: [PATCH 1/2] timer: vt8500: Move system timer to clocksource
Move mach-vt8500/timer.c to drivers/clocksource/vt8500_timer.c
and make necessary changes to Kconfig and Makefile.
vt8500_timer is moved from vt8500.c to clocksource/vt8500_timer.c
and added to common.h for reference from the board descriptor.
Signed-off-by: Tony Prisk <linux@...sktech.co.nz>
---
CC: John Stultz <johnstul@...ibm.com>
CC: Thomas Gleixner <tglx@...utronix.de>
arch/arm/mach-vt8500/Kconfig | 1 +
arch/arm/mach-vt8500/Makefile | 2 +-
arch/arm/mach-vt8500/common.h | 5 +-
arch/arm/mach-vt8500/timer.c | 184 -----------------------------------
arch/arm/mach-vt8500/vt8500.c | 4 -
drivers/clocksource/Kconfig | 3 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/vt8500_timer.c | 187 ++++++++++++++++++++++++++++++++++++
8 files changed, 197 insertions(+), 190 deletions(-)
delete mode 100644 arch/arm/mach-vt8500/timer.c
create mode 100644 drivers/clocksource/vt8500_timer.c
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index 2ed0b7d..570a801 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -8,5 +8,6 @@ config ARCH_VT8500
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select HAVE_CLK
+ select VT8500_TIMER
help
Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
diff --git a/arch/arm/mach-vt8500/Makefile b/arch/arm/mach-vt8500/Makefile
index e035251..92ceb24 100644
--- a/arch/arm/mach-vt8500/Makefile
+++ b/arch/arm/mach-vt8500/Makefile
@@ -1 +1 @@
-obj-$(CONFIG_ARCH_VT8500) += irq.o timer.o vt8500.o
+obj-$(CONFIG_ARCH_VT8500) += irq.o vt8500.o
diff --git a/arch/arm/mach-vt8500/common.h b/arch/arm/mach-vt8500/common.h
index 6f2b843..5d37a4f 100644
--- a/arch/arm/mach-vt8500/common.h
+++ b/arch/arm/mach-vt8500/common.h
@@ -18,7 +18,6 @@
#include <linux/of.h>
-void __init vt8500_timer_init(void);
int __init vt8500_irq_init(struct device_node *node,
struct device_node *parent);
@@ -28,4 +27,8 @@ void __init vtwm_clk_init(void __iomem *pmc_base);
/* defined in irq.c */
asmlinkage void vt8500_handle_irq(struct pt_regs *regs);
+/* defined in drivers/clocksource/vt8500_timer.c */
+extern struct sys_timer vt8500_timer;
+void __init vt8500_timer_init(void);
+
#endif
diff --git a/arch/arm/mach-vt8500/timer.c b/arch/arm/mach-vt8500/timer.c
deleted file mode 100644
index 3dd21a4..0000000
--- a/arch/arm/mach-vt8500/timer.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * arch/arm/mach-vt8500/timer.c
- *
- * Copyright (C) 2012 Tony Prisk <linux@...sktech.co.nz>
- * Copyright (C) 2010 Alexey Charkov <alchark@...il.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-/*
- * This file is copied and modified from the original timer.c provided by
- * Alexey Charkov. Minor changes have been made for Device Tree Support.
- */
-
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/delay.h>
-#include <asm/mach/time.h>
-
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-
-#define VT8500_TIMER_OFFSET 0x0100
-#define VT8500_TIMER_HZ 3000000
-#define TIMER_MATCH_VAL 0x0000
-#define TIMER_COUNT_VAL 0x0010
-#define TIMER_STATUS_VAL 0x0014
-#define TIMER_IER_VAL 0x001c /* interrupt enable */
-#define TIMER_CTRL_VAL 0x0020
-#define TIMER_AS_VAL 0x0024 /* access status */
-#define TIMER_COUNT_R_ACTIVE (1 << 5) /* not ready for read */
-#define TIMER_COUNT_W_ACTIVE (1 << 4) /* not ready for write */
-#define TIMER_MATCH_W_ACTIVE (1 << 0) /* not ready for write */
-
-#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
-
-static void __iomem *regbase;
-
-static cycle_t vt8500_timer_read(struct clocksource *cs)
-{
- int loops = msecs_to_loops(10);
- writel(3, regbase + TIMER_CTRL_VAL);
- while ((readl((regbase + TIMER_AS_VAL)) & TIMER_COUNT_R_ACTIVE)
- && --loops)
- cpu_relax();
- return readl(regbase + TIMER_COUNT_VAL);
-}
-
-static struct clocksource clocksource = {
- .name = "vt8500_timer",
- .rating = 200,
- .read = vt8500_timer_read,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int vt8500_timer_set_next_event(unsigned long cycles,
- struct clock_event_device *evt)
-{
- int loops = msecs_to_loops(10);
- cycle_t alarm = clocksource.read(&clocksource) + cycles;
- while ((readl(regbase + TIMER_AS_VAL) & TIMER_MATCH_W_ACTIVE)
- && --loops)
- cpu_relax();
- writel((unsigned long)alarm, regbase + TIMER_MATCH_VAL);
-
- if ((signed)(alarm - clocksource.read(&clocksource)) <= 16)
- return -ETIME;
-
- writel(1, regbase + TIMER_IER_VAL);
-
- return 0;
-}
-
-static void vt8500_timer_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- switch (mode) {
- case CLOCK_EVT_MODE_RESUME:
- case CLOCK_EVT_MODE_PERIODIC:
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- writel(readl(regbase + TIMER_CTRL_VAL) | 1,
- regbase + TIMER_CTRL_VAL);
- writel(0, regbase + TIMER_IER_VAL);
- break;
- }
-}
-
-static struct clock_event_device clockevent = {
- .name = "vt8500_timer",
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .rating = 200,
- .set_next_event = vt8500_timer_set_next_event,
- .set_mode = vt8500_timer_set_mode,
-};
-
-static irqreturn_t vt8500_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = dev_id;
- writel(0xf, regbase + TIMER_STATUS_VAL);
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction irq = {
- .name = "vt8500_timer",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = vt8500_timer_interrupt,
- .dev_id = &clockevent,
-};
-
-static struct of_device_id vt8500_timer_ids[] = {
- { .compatible = "via,vt8500-timer" },
- { }
-};
-
-void __init vt8500_timer_init(void)
-{
- struct device_node *np;
- int timer_irq;
-
- np = of_find_matching_node(NULL, vt8500_timer_ids);
- if (!np) {
- pr_err("%s: Timer description missing from Device Tree\n",
- __func__);
- return;
- }
- regbase = of_iomap(np, 0);
- if (!regbase) {
- pr_err("%s: Missing iobase description in Device Tree\n",
- __func__);
- of_node_put(np);
- return;
- }
- timer_irq = irq_of_parse_and_map(np, 0);
- if (!timer_irq) {
- pr_err("%s: Missing irq description in Device Tree\n",
- __func__);
- of_node_put(np);
- return;
- }
-
- writel(1, regbase + TIMER_CTRL_VAL);
- writel(0xf, regbase + TIMER_STATUS_VAL);
- writel(~0, regbase + TIMER_MATCH_VAL);
-
- if (clocksource_register_hz(&clocksource, VT8500_TIMER_HZ))
- pr_err("%s: vt8500_timer_init: clocksource_register failed for %s\n",
- __func__, clocksource.name);
-
- clockevents_calc_mult_shift(&clockevent, VT8500_TIMER_HZ, 4);
-
- /* copy-pasted from mach-msm; no idea */
- clockevent.max_delta_ns =
- clockevent_delta2ns(0xf0000000, &clockevent);
- clockevent.min_delta_ns = clockevent_delta2ns(4, &clockevent);
- clockevent.cpumask = cpumask_of(0);
-
- if (setup_irq(timer_irq, &irq))
- pr_err("%s: setup_irq failed for %s\n", __func__,
- clockevent.name);
- clockevents_register_device(&clockevent);
-}
-
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index 3c66d48..ed1c02b 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -175,10 +175,6 @@ static void __init vt8500_init_irq(void)
of_irq_init(vt8500_irq_match);
};
-static struct sys_timer vt8500_timer = {
- .init = vt8500_timer_init,
-};
-
static const char * const vt8500_dt_compat[] = {
"via,vt8500",
"wm,wm8650",
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 7fdcbd3..67883ce 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -25,6 +25,9 @@ config ARMADA_370_XP_TIMER
config SUNXI_TIMER
bool
+config VT8500_TIMER
+ bool
+
config CLKSRC_NOMADIK_MTU
bool
depends on (ARCH_NOMADIK || ARCH_U8500)
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index f93453d..c778d01 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -16,5 +16,6 @@ obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o
obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o
obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o
obj-$(CONFIG_SUNXI_TIMER) += sunxi_timer.o
+obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o
obj-$(CONFIG_CLKSRC_ARM_GENERIC) += arm_generic.o
diff --git a/drivers/clocksource/vt8500_timer.c b/drivers/clocksource/vt8500_timer.c
new file mode 100644
index 0000000..acb565a
--- /dev/null
+++ b/drivers/clocksource/vt8500_timer.c
@@ -0,0 +1,187 @@
+/*
+ * arch/arm/mach-vt8500/timer.c
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@...sktech.co.nz>
+ * Copyright (C) 2010 Alexey Charkov <alchark@...il.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * This file is copied and modified from the original timer.c provided by
+ * Alexey Charkov. Minor changes have been made for Device Tree Support.
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/delay.h>
+#include <asm/mach/time.h>
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#define VT8500_TIMER_OFFSET 0x0100
+#define VT8500_TIMER_HZ 3000000
+#define TIMER_MATCH_VAL 0x0000
+#define TIMER_COUNT_VAL 0x0010
+#define TIMER_STATUS_VAL 0x0014
+#define TIMER_IER_VAL 0x001c /* interrupt enable */
+#define TIMER_CTRL_VAL 0x0020
+#define TIMER_AS_VAL 0x0024 /* access status */
+#define TIMER_COUNT_R_ACTIVE (1 << 5) /* not ready for read */
+#define TIMER_COUNT_W_ACTIVE (1 << 4) /* not ready for write */
+#define TIMER_MATCH_W_ACTIVE (1 << 0) /* not ready for write */
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+
+static void __iomem *regbase;
+
+static cycle_t vt8500_timer_read(struct clocksource *cs)
+{
+ int loops = msecs_to_loops(10);
+ writel(3, regbase + TIMER_CTRL_VAL);
+ while ((readl((regbase + TIMER_AS_VAL)) & TIMER_COUNT_R_ACTIVE)
+ && --loops)
+ cpu_relax();
+ return readl(regbase + TIMER_COUNT_VAL);
+}
+
+static struct clocksource clocksource = {
+ .name = "vt8500_timer",
+ .rating = 200,
+ .read = vt8500_timer_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int vt8500_timer_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ int loops = msecs_to_loops(10);
+ cycle_t alarm = clocksource.read(&clocksource) + cycles;
+ while ((readl(regbase + TIMER_AS_VAL) & TIMER_MATCH_W_ACTIVE)
+ && --loops)
+ cpu_relax();
+ writel((unsigned long)alarm, regbase + TIMER_MATCH_VAL);
+
+ if ((signed)(alarm - clocksource.read(&clocksource)) <= 16)
+ return -ETIME;
+
+ writel(1, regbase + TIMER_IER_VAL);
+
+ return 0;
+}
+
+static void vt8500_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_RESUME:
+ case CLOCK_EVT_MODE_PERIODIC:
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ writel(readl(regbase + TIMER_CTRL_VAL) | 1,
+ regbase + TIMER_CTRL_VAL);
+ writel(0, regbase + TIMER_IER_VAL);
+ break;
+ }
+}
+
+static struct clock_event_device clockevent = {
+ .name = "vt8500_timer",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 200,
+ .set_next_event = vt8500_timer_set_next_event,
+ .set_mode = vt8500_timer_set_mode,
+};
+
+static irqreturn_t vt8500_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+ writel(0xf, regbase + TIMER_STATUS_VAL);
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction irq = {
+ .name = "vt8500_timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = vt8500_timer_interrupt,
+ .dev_id = &clockevent,
+};
+
+static struct of_device_id vt8500_timer_ids[] = {
+ { .compatible = "via,vt8500-timer" },
+ { }
+};
+
+static void __init vt8500_timer_init(void)
+{
+ struct device_node *np;
+ int timer_irq;
+
+ np = of_find_matching_node(NULL, vt8500_timer_ids);
+ if (!np) {
+ pr_err("%s: Timer description missing from Device Tree\n",
+ __func__);
+ return;
+ }
+ regbase = of_iomap(np, 0);
+ if (!regbase) {
+ pr_err("%s: Missing iobase description in Device Tree\n",
+ __func__);
+ of_node_put(np);
+ return;
+ }
+ timer_irq = irq_of_parse_and_map(np, 0);
+ if (!timer_irq) {
+ pr_err("%s: Missing irq description in Device Tree\n",
+ __func__);
+ of_node_put(np);
+ return;
+ }
+
+ writel(1, regbase + TIMER_CTRL_VAL);
+ writel(0xf, regbase + TIMER_STATUS_VAL);
+ writel(~0, regbase + TIMER_MATCH_VAL);
+
+ if (clocksource_register_hz(&clocksource, VT8500_TIMER_HZ))
+ pr_err("%s: vt8500_timer_init: clocksource_register failed for %s\n",
+ __func__, clocksource.name);
+
+ clockevents_calc_mult_shift(&clockevent, VT8500_TIMER_HZ, 4);
+
+ /* copy-pasted from mach-msm; no idea */
+ clockevent.max_delta_ns =
+ clockevent_delta2ns(0xf0000000, &clockevent);
+ clockevent.min_delta_ns = clockevent_delta2ns(4, &clockevent);
+ clockevent.cpumask = cpumask_of(0);
+
+ if (setup_irq(timer_irq, &irq))
+ pr_err("%s: setup_irq failed for %s\n", __func__,
+ clockevent.name);
+ clockevents_register_device(&clockevent);
+}
+
+struct sys_timer vt8500_timer = {
+ .init = vt8500_timer_init,
+};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists