linux-kernel - [ 067/123] USB: fix endpoint-disabling for failed config changes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20130109201507.213689431@linuxfoundation.org>
Date:	Wed,  9 Jan 2013 12:35:06 -0800
From:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:	linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	alan@...rguk.ukuu.org.uk, Alan Stern <stern@...land.harvard.edu>,
	Sarah Sharp <sarah.a.sharp@...ux.intel.com>
Subject: [ 067/123] USB: fix endpoint-disabling for failed config changes

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Stern <stern@...land.harvard.edu>

commit 36caff5d795429c572443894e8789c2150dd796b upstream.

This patch (as1631) fixes a bug that shows up when a config change
fails for a device under an xHCI controller.  The controller needs to
be told to disable the endpoints that have been enabled for the new
config.  The existing code does this, but before storing the
information about which endpoints were enabled!  As a result, any
second attempt to install the new config is doomed to fail because
xhci-hcd will refuse to enable an endpoint that is already enabled.

The patch optimistically initializes the new endpoints' device
structures before asking the device to switch to the new config.  If
the request fails then the endpoint information is already stored, so
we can use usb_hcd_alloc_bandwidth() to disable the endpoints with no
trouble.  The rest of the error path is slightly more complex now; we
have to disable the new interfaces and call put_device() rather than
simply deallocating them.

Signed-off-by: Alan Stern <stern@...land.harvard.edu>
Reported-and-tested-by: Matthias Schniedermeyer <ms@...d.de>
CC: Sarah Sharp <sarah.a.sharp@...ux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/usb/core/message.c |   54 +++++++++++++++++++++++++--------------------
 1 file changed, 31 insertions(+), 23 deletions(-)

--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1806,29 +1806,8 @@ free_interfaces:
 		goto free_interfaces;
 	}
 
-	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-			      USB_REQ_SET_CONFIGURATION, 0, configuration, 0,
-			      NULL, 0, USB_CTRL_SET_TIMEOUT);
-	if (ret < 0) {
-		/* All the old state is gone, so what else can we do?
-		 * The device is probably useless now anyway.
-		 */
-		cp = NULL;
-	}
-
-	dev->actconfig = cp;
-	if (!cp) {
-		usb_set_device_state(dev, USB_STATE_ADDRESS);
-		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
-		/* Leave LPM disabled while the device is unconfigured. */
-		mutex_unlock(hcd->bandwidth_mutex);
-		usb_autosuspend_device(dev);
-		goto free_interfaces;
-	}
-	mutex_unlock(hcd->bandwidth_mutex);
-	usb_set_device_state(dev, USB_STATE_CONFIGURED);
-
-	/* Initialize the new interface structures and the
+	/*
+	 * Initialize the new interface structures and the
 	 * hc/hcd/usbcore interface/endpoint state.
 	 */
 	for (i = 0; i < nintf; ++i) {
@@ -1872,6 +1851,35 @@ free_interfaces:
 	}
 	kfree(new_interfaces);
 
+	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			      USB_REQ_SET_CONFIGURATION, 0, configuration, 0,
+			      NULL, 0, USB_CTRL_SET_TIMEOUT);
+	if (ret < 0 && cp) {
+		/*
+		 * All the old state is gone, so what else can we do?
+		 * The device is probably useless now anyway.
+		 */
+		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+		for (i = 0; i < nintf; ++i) {
+			usb_disable_interface(dev, cp->interface[i], true);
+			put_device(&cp->interface[i]->dev);
+			cp->interface[i] = NULL;
+		}
+		cp = NULL;
+	}
+
+	dev->actconfig = cp;
+	mutex_unlock(hcd->bandwidth_mutex);
+
+	if (!cp) {
+		usb_set_device_state(dev, USB_STATE_ADDRESS);
+
+		/* Leave LPM disabled while the device is unconfigured. */
+		usb_autosuspend_device(dev);
+		return ret;
+	}
+	usb_set_device_state(dev, USB_STATE_CONFIGURED);
+
 	if (cp->string == NULL &&
 			!(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS))
 		cp->string = usb_cache_string(dev, cp->desc.iConfiguration);


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/