[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20130110193547.GQ14660@beef>
Date: Thu, 10 Jan 2013 14:35:47 -0500
From: Matt Porter <mporter@...com>
To: Sekhar Nori <nsekhar@...com>
Cc: Linux DaVinci Kernel List
<davinci-linux-open-source@...ux.davincidsp.com>,
Linux OMAP List <linux-omap@...r.kernel.org>,
Russell King <linux@....linux.org.uk>,
Benoit Cousson <b-cousson@...com>,
Arnd Bergmann <arnd@...db.de>,
Linux Documentation List <linux-doc@...r.kernel.org>,
Tony Lindgren <tony@...mide.com>,
Devicetree Discuss <devicetree-discuss@...ts.ozlabs.org>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
Linux MMC List <linux-mmc@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Rob Herring <rob.herring@...xeda.com>,
Grant Likely <grant.likely@...retlab.ca>,
Vinod Koul <vinod.koul@...el.com>,
Rob Landley <rob@...dley.net>, Dan Williams <djbw@...com>,
Linux SPI Devel List
<spi-devel-general@...ts.sourceforge.net>,
Chris Ball <cjb@...top.org>,
Linux ARM Kernel List <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [RFC PATCH v3 16/16] ARM: dts: add AM33XX SPI support
On Sun, Oct 28, 2012 at 05:01:29PM +0530, Sekhar Nori wrote:
> On 10/18/2012 6:56 PM, Matt Porter wrote:
> > Adds AM33XX SPI support for am335x-bone and am335x-evm.
> >
> > Signed-off-by: Matt Porter <mporter@...com>
> > ---
> > arch/arm/boot/dts/am335x-bone.dts | 17 +++++++++++++++
> > arch/arm/boot/dts/am335x-evm.dts | 9 ++++++++
> > arch/arm/boot/dts/am33xx.dtsi | 43 +++++++++++++++++++++++++++++++++++++
> > 3 files changed, 69 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
> > index 5510979..23edfd8 100644
> > --- a/arch/arm/boot/dts/am335x-bone.dts
> > +++ b/arch/arm/boot/dts/am335x-bone.dts
> > @@ -18,6 +18,17 @@
> > reg = <0x80000000 0x10000000>; /* 256 MB */
> > };
> >
> > + am3358_pinmux: pinmux@...10800 {
> > + spi1_pins: pinmux_spi1_pins {
> > + pinctrl-single,pins = <
> > + 0x190 0x13 /* mcasp0_aclkx.spi1_sclk, OUTPUT_PULLUP | MODE3 */
> > + 0x194 0x33 /* mcasp0_fsx.spi1_d0, INPUT_PULLUP | MODE3 */
> > + 0x198 0x13 /* mcasp0_axr0.spi1_d1, OUTPUT_PULLUP | MODE3 */
> > + 0x19c 0x13 /* mcasp0_ahclkr.spi1_cs0, OUTPUT_PULLUP | MODE3 */
> > + >;
>
> Is there a single pinmux setting that provides SPI functionality on the
> bone headers? Or this is specific to a cape you tested with?
No, there are two usable settings for spi1 and one setting for spi0.
I'm dropping this from the series since it's specific to how I wired up
the homebrew cape I use for spi testing on the Bone. I publish the
branch where all these extra "test-specific" patches (that aren't intended
to be merged) are at in the cover letter. Anybody that needs context of
how/what worked and was tested can grab them there.
-Matt
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists