linux-kernel - [PATCH v6 0/4] Adding usb2.0 host-phy support for exynos5250

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-id: <1357916550-11421-1-git-send-email-gautam.vivek@samsung.com>
Date:	Fri, 11 Jan 2013 20:32:26 +0530
From:	Vivek Gautam <gautam.vivek@...sung.com>
To:	linux-usb@...r.kernel.org
Cc:	devicetree-discuss@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
	linux-samsung-soc@...r.kernel.org, gregkh@...uxfoundation.org,
	balbi@...com, kgene.kim@...sung.com, thomas.abraham@...aro.org,
	rob.herring@...xeda.com, grant.likely@...retlab.ca,
	sylvester.nawrocki@...il.com, dianders@...omium.org,
	jg1.han@...sung.com, p.paneri@...sung.com
Subject: [PATCH v6 0/4] Adding usb2.0 host-phy support for exynos5250

Changes from v5:
 - Rebased on top of latest patches:
        usb: phy: samsung: Introducing usb phy driver for hsotg (v9)
        usb: phy: samsung: Add support to set pmu isolation (v6)
   As a result adding hostphy enable mask and hostphy register offsets
   to driver data in order to access the HOSTPHY CONTROL register.

 - Adding member 'otg' to struct samsung-usbphy so that its consumers
   can call otg->set_host so as to make 'phy' aware of the consumer type:
	HOST/DEVICE

 - Adding 'otg' to 'struct s5p_ehci_hcd' and 'struct exynos_ohci_hcd'
   which keeps track of 'otg' of the controllers' phy. This then sets
   the host.

 - Moved samsung_usbphy_set_type() calls from ehci-s5p and ohci-exynos
   to phy driver itself where based on phy_type it is called.

 - Added separate macro definition for USB20PHY_CFG register to select
   between host/device type usb link.

 - Removing unnecessary argument 'phy_type' from samsung_usbphy_set_type()
   and samsung_usbphy_cfg_sel().

 - Addressed few nits:
	-- added macro for 'KHZ'
	-- removing useless 'if' from samsung_usbphy_cfg_sel()
	-- keeping the place of clk_get intact and requesting driver
	   data before that.

Vivek Gautam (4):
  ARM: EXYNOS: Update & move usb-phy types to generic include layer
  usb: phy: samsung: Add host phy support to samsung-phy driver
  USB: ehci-s5p: Add phy driver support
  USB: ohci-exynos: Add phy driver support

 .../devicetree/bindings/usb/samsung-usbphy.txt     |   12 +-
 drivers/usb/host/ehci-s5p.c                        |   81 +++-
 drivers/usb/host/ohci-exynos.c                     |   85 +++-
 drivers/usb/phy/Kconfig                            |    2 +-
 drivers/usb/phy/samsung-usbphy.c                   |  512 ++++++++++++++++++--
 include/linux/usb/samsung_usb_phy.h                |   16 +
 6 files changed, 635 insertions(+), 73 deletions(-)
 create mode 100644 include/linux/usb/samsung_usb_phy.h

-- 
1.7.6.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/