lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-id: <1357916550-11421-2-git-send-email-gautam.vivek@samsung.com> Date: Fri, 11 Jan 2013 20:32:27 +0530 From: Vivek Gautam <gautam.vivek@...sung.com> To: linux-usb@...r.kernel.org Cc: devicetree-discuss@...ts.ozlabs.org, linux-kernel@...r.kernel.org, linux-samsung-soc@...r.kernel.org, gregkh@...uxfoundation.org, balbi@...com, kgene.kim@...sung.com, thomas.abraham@...aro.org, rob.herring@...xeda.com, grant.likely@...retlab.ca, sylvester.nawrocki@...il.com, dianders@...omium.org, jg1.han@...sung.com, p.paneri@...sung.com Subject: [PATCH v6 1/4] ARM: EXYNOS: Update & move usb-phy types to generic include layer Updating the names of usb-phy types to more generic names: USB_PHY_TYPE_DEIVCE & USB_PHY_TYPE_HOST; and further update its dependencies. Signed-off-by: Praveen Paneri <p.paneri@...sung.com> Signed-off-by: Vivek Gautam <gautam.vivek@...sung.com> --- Changes from v5: - None drivers/usb/host/ehci-s5p.c | 9 +++++---- drivers/usb/host/ohci-exynos.c | 9 +++++---- include/linux/usb/samsung_usb_phy.h | 16 ++++++++++++++++ 3 files changed, 26 insertions(+), 8 deletions(-) create mode 100644 include/linux/usb/samsung_usb_phy.h diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c index 319dcfa..46ca5ef 100644 --- a/drivers/usb/host/ehci-s5p.c +++ b/drivers/usb/host/ehci-s5p.c @@ -17,6 +17,7 @@ #include <linux/platform_device.h> #include <linux/of_gpio.h> #include <linux/platform_data/usb-ehci-s5p.h> +#include <linux/usb/samsung_usb_phy.h> #include <plat/usb-phy.h> #define EHCI_INSNREG00(base) (base + 0x90) @@ -164,7 +165,7 @@ static int s5p_ehci_probe(struct platform_device *pdev) } if (pdata->phy_init) - pdata->phy_init(pdev, S5P_USB_PHY_HOST); + pdata->phy_init(pdev, USB_PHY_TYPE_HOST); ehci = hcd_to_ehci(hcd); ehci->caps = hcd->regs; @@ -198,7 +199,7 @@ static int s5p_ehci_remove(struct platform_device *pdev) usb_remove_hcd(hcd); if (pdata && pdata->phy_exit) - pdata->phy_exit(pdev, S5P_USB_PHY_HOST); + pdata->phy_exit(pdev, USB_PHY_TYPE_HOST); clk_disable_unprepare(s5p_ehci->clk); @@ -229,7 +230,7 @@ static int s5p_ehci_suspend(struct device *dev) rc = ehci_suspend(hcd, do_wakeup); if (pdata && pdata->phy_exit) - pdata->phy_exit(pdev, S5P_USB_PHY_HOST); + pdata->phy_exit(pdev, USB_PHY_TYPE_HOST); clk_disable_unprepare(s5p_ehci->clk); @@ -246,7 +247,7 @@ static int s5p_ehci_resume(struct device *dev) clk_prepare_enable(s5p_ehci->clk); if (pdata && pdata->phy_init) - pdata->phy_init(pdev, S5P_USB_PHY_HOST); + pdata->phy_init(pdev, USB_PHY_TYPE_HOST); /* DMA burst Enable */ writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs)); diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index aa3b884..804fb62 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -15,6 +15,7 @@ #include <linux/of.h> #include <linux/platform_device.h> #include <linux/platform_data/usb-exynos.h> +#include <linux/usb/samsung_usb_phy.h> #include <plat/usb-phy.h> struct exynos_ohci_hcd { @@ -153,7 +154,7 @@ static int exynos_ohci_probe(struct platform_device *pdev) } if (pdata->phy_init) - pdata->phy_init(pdev, S5P_USB_PHY_HOST); + pdata->phy_init(pdev, USB_PHY_TYPE_HOST); ohci = hcd_to_ohci(hcd); ohci_hcd_init(ohci); @@ -184,7 +185,7 @@ static int exynos_ohci_remove(struct platform_device *pdev) usb_remove_hcd(hcd); if (pdata && pdata->phy_exit) - pdata->phy_exit(pdev, S5P_USB_PHY_HOST); + pdata->phy_exit(pdev, USB_PHY_TYPE_HOST); clk_disable_unprepare(exynos_ohci->clk); @@ -229,7 +230,7 @@ static int exynos_ohci_suspend(struct device *dev) clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); if (pdata && pdata->phy_exit) - pdata->phy_exit(pdev, S5P_USB_PHY_HOST); + pdata->phy_exit(pdev, USB_PHY_TYPE_HOST); clk_disable_unprepare(exynos_ohci->clk); @@ -249,7 +250,7 @@ static int exynos_ohci_resume(struct device *dev) clk_prepare_enable(exynos_ohci->clk); if (pdata && pdata->phy_init) - pdata->phy_init(pdev, S5P_USB_PHY_HOST); + pdata->phy_init(pdev, USB_PHY_TYPE_HOST); ohci_resume(hcd, false); diff --git a/include/linux/usb/samsung_usb_phy.h b/include/linux/usb/samsung_usb_phy.h new file mode 100644 index 0000000..9167826 --- /dev/null +++ b/include/linux/usb/samsung_usb_phy.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2012 Samsung Electronics Co.Ltd + * http://www.samsung.com/ + * + * Defines phy types for samsung usb phy controllers - HOST or DEIVCE. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +enum samsung_usb_phy_type { + USB_PHY_TYPE_DEVICE, + USB_PHY_TYPE_HOST, +}; -- 1.7.6.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists