| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1358242994-5200-1-git-send-email-linus.walleij@stericsson.com>
Date: Tue, 15 Jan 2013 10:43:14 +0100
From: Linus Walleij <linus.walleij@...ricsson.com>
To: <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
Cc: Stephen Warren <swarren@...dia.com>,
Anmar Oueja <anmar.oueja@...aro.org>,
Lee Jones <lee.jones@...aro.org>,
Patrice Chotard <patrice.chotard@...com>,
Linus Walleij <linus.walleij@...aro.org>
Subject: [PATCH 4/4] pinctrl/abx500: add AB8500 pinctrl driver
From: Patrice Chotard <patrice.chotard@...com>
This adds a subdriver for the AB8500 pinctrl portions.
Signed-off-by: Patrice Chotard <patrice.chotard@...com>
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
---
arch/arm/mach-ux500/Kconfig | 1 +
drivers/pinctrl/Kconfig | 4 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-ab8500.c | 477 +++++++++++++++++++++++++++++++++++++++
4 files changed, 483 insertions(+)
create mode 100644 drivers/pinctrl/pinctrl-ab8500.c
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 2c090d7..31f1b5a 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -19,6 +19,7 @@ config UX500_SOC_DB8500
select CPU_FREQ_TABLE if CPU_FREQ
select MFD_DB8500_PRCMU
select PINCTRL_DB8500
+ select PINCTRL_AB8500
select REGULATOR
select REGULATOR_DB8500_PRCMU
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index ec819d8..223f40a 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -33,6 +33,10 @@ config PINCTRL_ABX500
help
Select this to enable the ABx500 family IC GPIO driver
+config PINCTRL_AB8500
+ bool "AB8500 pin controller driver"
+ depends on PINCTRL_ABX500 && ARCH_U8500
+
config PINCTRL_AT91
bool "AT91 pinctrl driver"
depends on OF
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index d10bf87..b7985b9 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_PINCTRL) += devicetree.o
endif
obj-$(CONFIG_GENERIC_PINCONF) += pinconf-generic.o
obj-$(CONFIG_PINCTRL_ABX500) += pinctrl-abx500.o
+obj-$(CONFIG_PINCTRL_AB8500) += pinctrl-ab8500.o
obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
obj-$(CONFIG_PINCTRL_IMX) += pinctrl-imx.o
diff --git a/drivers/pinctrl/pinctrl-ab8500.c b/drivers/pinctrl/pinctrl-ab8500.c
new file mode 100644
index 0000000..385ad1d
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-ab8500.c
@@ -0,0 +1,477 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Author: Patrice Chotard <patrice.chotard@...ricsson.com> for ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include "pinctrl-abx500.h"
+
+/* All the pins that can be used for GPIO and some other functions */
+#define ABX500_GPIO(offset) (offset)
+
+#define AB8500_PIN_T10 ABX500_GPIO(1)
+#define AB8500_PIN_T9 ABX500_GPIO(2)
+#define AB8500_PIN_U9 ABX500_GPIO(3)
+#define AB8500_PIN_W2 ABX500_GPIO(4)
+/* hole */
+#define AB8500_PIN_Y18 ABX500_GPIO(6)
+#define AB8500_PIN_AA20 ABX500_GPIO(7)
+#define AB8500_PIN_W18 ABX500_GPIO(8)
+#define AB8500_PIN_AA19 ABX500_GPIO(9)
+#define AB8500_PIN_U17 ABX500_GPIO(10)
+#define AB8500_PIN_AA18 ABX500_GPIO(11)
+#define AB8500_PIN_U16 ABX500_GPIO(12)
+#define AB8500_PIN_W17 ABX500_GPIO(13)
+#define AB8500_PIN_F14 ABX500_GPIO(14)
+#define AB8500_PIN_B17 ABX500_GPIO(15)
+#define AB8500_PIN_F15 ABX500_GPIO(16)
+#define AB8500_PIN_P5 ABX500_GPIO(17)
+#define AB8500_PIN_R5 ABX500_GPIO(18)
+#define AB8500_PIN_U5 ABX500_GPIO(19)
+#define AB8500_PIN_T5 ABX500_GPIO(20)
+#define AB8500_PIN_H19 ABX500_GPIO(21)
+#define AB8500_PIN_G20 ABX500_GPIO(22)
+#define AB8500_PIN_G19 ABX500_GPIO(23)
+#define AB8500_PIN_T14 ABX500_GPIO(24)
+#define AB8500_PIN_R16 ABX500_GPIO(25)
+#define AB8500_PIN_M16 ABX500_GPIO(26)
+#define AB8500_PIN_J6 ABX500_GPIO(27)
+#define AB8500_PIN_K6 ABX500_GPIO(28)
+#define AB8500_PIN_G6 ABX500_GPIO(29)
+#define AB8500_PIN_H6 ABX500_GPIO(30)
+#define AB8500_PIN_F5 ABX500_GPIO(31)
+#define AB8500_PIN_G5 ABX500_GPIO(32)
+/* hole */
+#define AB8500_PIN_R17 ABX500_GPIO(34)
+#define AB8500_PIN_W15 ABX500_GPIO(35)
+#define AB8500_PIN_A17 ABX500_GPIO(36)
+#define AB8500_PIN_E15 ABX500_GPIO(37)
+#define AB8500_PIN_C17 ABX500_GPIO(38)
+#define AB8500_PIN_E16 ABX500_GPIO(39)
+#define AB8500_PIN_T19 ABX500_GPIO(40)
+#define AB8500_PIN_U19 ABX500_GPIO(41)
+#define AB8500_PIN_U2 ABX500_GPIO(42)
+
+/* indicates the highest GPIO number */
+#define AB8500_GPIO_MAX_NUMBER 42
+
+/*
+ * The names of the pins are denoted by GPIO number and ball name, even
+ * though they can be used for other things than GPIO, this is the first
+ * column in the table of the data sheet and often used on schematics and
+ * such.
+ */
+static const struct pinctrl_pin_desc ab8500_ranges_pins[] = {
+ PINCTRL_PIN(AB8500_PIN_T10, "GPIO1_T10"),
+ PINCTRL_PIN(AB8500_PIN_T9, "GPIO2_T9"),
+ PINCTRL_PIN(AB8500_PIN_U9, "GPIO3_U9"),
+ PINCTRL_PIN(AB8500_PIN_W2, "GPIO4_W2"),
+ /* hole */
+ PINCTRL_PIN(AB8500_PIN_Y18, "GPIO6_Y18"),
+ PINCTRL_PIN(AB8500_PIN_AA20, "GPIO7_AA20"),
+ PINCTRL_PIN(AB8500_PIN_W18, "GPIO8_W18"),
+ PINCTRL_PIN(AB8500_PIN_AA19, "GPIO9_AA19"),
+ PINCTRL_PIN(AB8500_PIN_U17, "GPIO10_U17"),
+ PINCTRL_PIN(AB8500_PIN_AA18, "GPIO11_AA18"),
+ PINCTRL_PIN(AB8500_PIN_U16, "GPIO12_U16"),
+ PINCTRL_PIN(AB8500_PIN_W17, "GPIO13_W17"),
+ PINCTRL_PIN(AB8500_PIN_F14, "GPIO14_F14"),
+ PINCTRL_PIN(AB8500_PIN_B17, "GPIO15_B17"),
+ PINCTRL_PIN(AB8500_PIN_F15, "GPIO16_F15"),
+ PINCTRL_PIN(AB8500_PIN_P5, "GPIO17_P5"),
+ PINCTRL_PIN(AB8500_PIN_R5, "GPIO18_R5"),
+ PINCTRL_PIN(AB8500_PIN_U5, "GPIO19_U5"),
+ PINCTRL_PIN(AB8500_PIN_T5, "GPIO20_T5"),
+ PINCTRL_PIN(AB8500_PIN_H19, "GPIO21_H19"),
+ PINCTRL_PIN(AB8500_PIN_G20, "GPIO22_G20"),
+ PINCTRL_PIN(AB8500_PIN_G19, "GPIO23_G19"),
+ PINCTRL_PIN(AB8500_PIN_T14, "GPIO24_T14"),
+ PINCTRL_PIN(AB8500_PIN_R16, "GPIO25_R16"),
+ PINCTRL_PIN(AB8500_PIN_M16, "GPIO26_M16"),
+ PINCTRL_PIN(AB8500_PIN_J6, "GPIO27_J6"),
+ PINCTRL_PIN(AB8500_PIN_K6, "GPIO28_K6"),
+ PINCTRL_PIN(AB8500_PIN_G6, "GPIO29_G6"),
+ PINCTRL_PIN(AB8500_PIN_H6, "GPIO30_H6"),
+ PINCTRL_PIN(AB8500_PIN_F5, "GPIO31_F5"),
+ PINCTRL_PIN(AB8500_PIN_G5, "GPIO32_G5"),
+ /* hole */
+ PINCTRL_PIN(AB8500_PIN_R17, "GPIO34_R17"),
+ PINCTRL_PIN(AB8500_PIN_W15, "GPIO35_W15"),
+ PINCTRL_PIN(AB8500_PIN_A17, "GPIO36_A17"),
+ PINCTRL_PIN(AB8500_PIN_E15, "GPIO37_E15"),
+ PINCTRL_PIN(AB8500_PIN_C17, "GPIO38_C17"),
+ PINCTRL_PIN(AB8500_PIN_E16, "GPIO39_E16"),
+ PINCTRL_PIN(AB8500_PIN_T19, "GPIO40_T19"),
+ PINCTRL_PIN(AB8500_PIN_U19, "GPIO41_U19"),
+ PINCTRL_PIN(AB8500_PIN_U2, "GPIO42_U2"),
+};
+
+/*
+ * Maps local GPIO offsets to local pin numbers
+ */
+static const struct abx500_pinrange ab8500_pinranges[] = {
+ ABX500_PINRANGE(1, 4),
+ ABX500_PINRANGE(6, 27),
+ ABX500_PINRANGE(34, 9),
+};
+
+/*
+ * Read the pin group names like this:
+ * sysclkreq2_d_1 = first groups of pins for sysclkreq2 on default function
+ *
+ * The groups are arranged as sets per altfunction column, so we can
+ * mux in one group at a time by selecting the same altfunction for them
+ * all. When functions require pins on different altfunctions, you need
+ * to combine several groups.
+ */
+
+/* default column */
+static const unsigned sysclkreq2_d_1_pins[] = { AB8500_PIN_T10 };
+static const unsigned sysclkreq3_d_1_pins[] = { AB8500_PIN_T9 };
+static const unsigned sysclkreq4_d_1_pins[] = { AB8500_PIN_U9 };
+static const unsigned sysclkreq6_d_1_pins[] = { AB8500_PIN_W2 };
+static const unsigned ycbcr0123_d_1_pins[] = { AB8500_PIN_Y18, AB8500_PIN_AA20,
+ AB8500_PIN_W18, AB8500_PIN_AA19};
+static const unsigned gpio10_d_1_pins[] = { AB8500_PIN_U17 };
+static const unsigned gpio11_d_1_pins[] = { AB8500_PIN_AA18 };
+static const unsigned gpio12_d_1_pins[] = { AB8500_PIN_U16 };
+static const unsigned gpio13_d_1_pins[] = { AB8500_PIN_W17 };
+static const unsigned pwmout1_d_1_pins[] = { AB8500_PIN_F14 };
+static const unsigned pwmout2_d_1_pins[] = { AB8500_PIN_B17 };
+static const unsigned pwmout3_d_1_pins[] = { AB8500_PIN_F15 };
+
+/* audio data interface 1*/
+static const unsigned adi1_d_1_pins[] = { AB8500_PIN_P5, AB8500_PIN_R5,
+ AB8500_PIN_U5, AB8500_PIN_T5 };
+/* USBUICC */
+static const unsigned usbuicc_d_1_pins[] = { AB8500_PIN_H19, AB8500_PIN_G20,
+ AB8500_PIN_G19 };
+static const unsigned sysclkreq7_d_1_pins[] = { AB8500_PIN_T14 };
+static const unsigned sysclkreq8_d_1_pins[] = { AB8500_PIN_R16 };
+static const unsigned gpio26_d_1_pins[] = { AB8500_PIN_M16 };
+/* Digital microphone 1 and 2 */
+static const unsigned dmic12_d_1_pins[] = { AB8500_PIN_J6, AB8500_PIN_K6 };
+/* Digital microphone 3 and 4 */
+static const unsigned dmic34_d_1_pins[] = { AB8500_PIN_G6, AB8500_PIN_H6 };
+/* Digital microphone 5 and 6 */
+static const unsigned dmic56_d_1_pins[] = { AB8500_PIN_F5, AB8500_PIN_G5 };
+static const unsigned extcpena_d_1_pins[] = { AB8500_PIN_R17 };
+static const unsigned gpio35_d_1_pins[] = { AB8500_PIN_W15 };
+/* APE SPI */
+static const unsigned apespi_d_1_pins[] = { AB8500_PIN_A17, AB8500_PIN_E15,
+ AB8500_PIN_C17, AB8500_PIN_E16};
+/* modem SDA/SCL */
+static const unsigned modsclsda_d_1_pins[] = { AB8500_PIN_T19, AB8500_PIN_U19 };
+static const unsigned sysclkreq5_d_1_pins[] = { AB8500_PIN_U2 };
+
+/* Altfunction A column */
+static const unsigned gpio1_a_1_pins[] = { AB8500_PIN_T10 };
+static const unsigned gpio2_a_1_pins[] = { AB8500_PIN_T9 };
+static const unsigned gpio3_a_1_pins[] = { AB8500_PIN_U9 };
+static const unsigned gpio4_a_1_pins[] = { AB8500_PIN_W2 };
+static const unsigned gpio6_a_1_pins[] = { AB8500_PIN_Y18 };
+static const unsigned gpio7_a_1_pins[] = { AB8500_PIN_AA20 };
+static const unsigned gpio8_a_1_pins[] = { AB8500_PIN_W18 };
+static const unsigned gpio9_a_1_pins[] = { AB8500_PIN_AA19 };
+/* YCbCr4 YCbCr5 YCbCr6 YCbCr7*/
+static const unsigned ycbcr4567_a_1_pins[] = { AB8500_PIN_U17, AB8500_PIN_AA18,
+ AB8500_PIN_U16, AB8500_PIN_W17};
+static const unsigned gpio14_a_1_pins[] = { AB8500_PIN_F14 };
+static const unsigned gpio15_a_1_pins[] = { AB8500_PIN_B17 };
+static const unsigned gpio16_a_1_pins[] = { AB8500_PIN_F15 };
+static const unsigned gpio17_a_1_pins[] = { AB8500_PIN_P5 };
+static const unsigned gpio18_a_1_pins[] = { AB8500_PIN_R5 };
+static const unsigned gpio19_a_1_pins[] = { AB8500_PIN_U5 };
+static const unsigned gpio20_a_1_pins[] = { AB8500_PIN_T5 };
+static const unsigned gpio21_a_1_pins[] = { AB8500_PIN_H19 };
+static const unsigned gpio22_a_1_pins[] = { AB8500_PIN_G20 };
+static const unsigned gpio23_a_1_pins[] = { AB8500_PIN_G19 };
+static const unsigned gpio24_a_1_pins[] = { AB8500_PIN_T14 };
+static const unsigned gpio25_a_1_pins[] = { AB8500_PIN_R16 };
+static const unsigned gpio27_a_1_pins[] = { AB8500_PIN_J6 };
+static const unsigned gpio28_a_1_pins[] = { AB8500_PIN_K6 };
+static const unsigned gpio29_a_1_pins[] = { AB8500_PIN_G6 };
+static const unsigned gpio30_a_1_pins[] = { AB8500_PIN_H6 };
+static const unsigned gpio31_a_1_pins[] = { AB8500_PIN_F5 };
+static const unsigned gpio32_a_1_pins[] = { AB8500_PIN_G5 };
+static const unsigned gpio34_a_1_pins[] = { AB8500_PIN_R17 };
+static const unsigned gpio36_a_1_pins[] = { AB8500_PIN_A17 };
+static const unsigned gpio37_a_1_pins[] = { AB8500_PIN_E15 };
+static const unsigned gpio38_a_1_pins[] = { AB8500_PIN_C17 };
+static const unsigned gpio39_a_1_pins[] = { AB8500_PIN_E16 };
+static const unsigned gpio40_a_1_pins[] = { AB8500_PIN_T19 };
+static const unsigned gpio41_a_1_pins[] = { AB8500_PIN_U19 };
+static const unsigned gpio42_a_1_pins[] = { AB8500_PIN_U2 };
+
+/* Altfunction B colum */
+static const unsigned hiqclkena_b_1_pins[] = { AB8500_PIN_U17 };
+static const unsigned usbuiccpd_b_1_pins[] = { AB8500_PIN_AA18 };
+static const unsigned i2ctrig1_b_1_pins[] = { AB8500_PIN_U16 };
+static const unsigned i2ctrig2_b_1_pins[] = { AB8500_PIN_W17 };
+
+/* Altfunction C column */
+static const unsigned usbvdat_c_1_pins[] = { AB8500_PIN_W17 };
+
+
+#define AB8500_PIN_GROUP(a, b) { .name = #a, .pins = a##_pins, \
+ .npins = ARRAY_SIZE(a##_pins), .altsetting = b }
+
+static const struct abx500_pingroup ab8500_ranges_groups[] = {
+ /* default column */
+ AB8500_PIN_GROUP(sysclkreq2_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(sysclkreq3_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(sysclkreq4_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(sysclkreq6_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(ycbcr0123_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(gpio10_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(gpio11_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(gpio12_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(gpio13_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(pwmout1_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(pwmout2_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(pwmout3_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(adi1_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(usbuicc_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(sysclkreq7_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(sysclkreq8_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(gpio26_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(dmic12_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(dmic34_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(dmic56_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(extcpena_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(gpio35_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(apespi_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(modsclsda_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(sysclkreq5_d_1, ABX500_DEFAULT),
+ /* Altfunction A column */
+ AB8500_PIN_GROUP(gpio1_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio2_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio3_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio4_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio6_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio7_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio8_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio9_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(ycbcr4567_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio14_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio15_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio16_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio17_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio18_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio19_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio20_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio21_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio22_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio23_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio24_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio25_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio27_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio28_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio29_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio30_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio31_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio32_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio34_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio36_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio37_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio38_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio39_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio40_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio41_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio42_a_1, ABX500_ALT_A),
+ /* Altfunction B column */
+ AB8500_PIN_GROUP(hiqclkena_b_1, ABX500_ALT_B),
+ AB8500_PIN_GROUP(usbuiccpd_b_1, ABX500_ALT_B),
+ AB8500_PIN_GROUP(i2ctrig1_b_1, ABX500_ALT_B),
+ AB8500_PIN_GROUP(i2ctrig2_b_1, ABX500_ALT_B),
+ /* Altfunction C column */
+ AB8500_PIN_GROUP(usbvdat_c_1, ABX500_ALT_C),
+};
+
+/* We use this macro to define the groups applicable to a function */
+#define AB8500_FUNC_GROUPS(a, b...) \
+static const char * const a##_groups[] = { b };
+
+AB8500_FUNC_GROUPS(sysclkreq, "sysclkreq2_d_1", "sysclkreq3_d_1",
+ "sysclkreq4_d_1", "sysclkreq5_d_1", "sysclkreq6_d_1",
+ "sysclkreq7_d_1", "sysclkreq8_d_1");
+AB8500_FUNC_GROUPS(ycbcr, "ycbcr0123_d_1", "ycbcr4567_a_1");
+AB8500_FUNC_GROUPS(gpio, "gpio1_a_1", "gpio2_a_1", "gpio3_a_1", "gpio4_a_1",
+ "gpio6_a_1", "gpio7_a_1", "gpio8_a_1", "gpio9_a_1",
+ "gpio10_d_1", "gpio11_d_1", "gpio12_d_1", "gpio13_d_1",
+ "gpio14_a_1", "gpio15_a_1", "gpio16_a_1", "gpio17_a_1",
+ "gpio18_a_1", "gpio19_a_1", "gpio20_a_1", "gpio21_a_1",
+ "gpio22_a_1", "gpio23_a_1", "gpio24_a_1", "gpio25_a_1",
+ "gpio26_d_1", "gpio27_a_1", "gpio28_a_1", "gpio29_a_1",
+ "gpio30_a_1", "gpio31_a_1", "gpio32_a_1", "gpio34_a_1",
+ "gpio35_d_1", "gpio36_a_1", "gpio37_a_1", "gpio38_a_1",
+ "gpio39_a_1", "gpio40_a_1", "gpio41_a_1", "gpio42_a_1");
+AB8500_FUNC_GROUPS(pwmout, "pwmout1_d_1", "pwmout2_d_1", "pwmout3_d_1");
+AB8500_FUNC_GROUPS(adi1, "adi1_d_1");
+AB8500_FUNC_GROUPS(usbuicc, "usbuicc_d_1", "usbuiccpd_b_1");
+AB8500_FUNC_GROUPS(dmic, "dmic12_d_1", "dmic34_d_1", "dmic56_d_1");
+AB8500_FUNC_GROUPS(extcpena, "extcpena_d_1");
+AB8500_FUNC_GROUPS(apespi, "apespi_d_1");
+AB8500_FUNC_GROUPS(modsclsda, "modsclsda_d_1");
+AB8500_FUNC_GROUPS(hiqclkena, "hiqclkena_b_1");
+AB8500_FUNC_GROUPS(i2ctrig, "i2ctrig1_b_1", "i2ctrig2_b_1");
+AB8500_FUNC_GROUPS(usbvdat, "usbvdat_c_1");
+
+#define FUNCTION(fname) \
+ { \
+ .name = #fname, \
+ .groups = fname##_groups, \
+ .ngroups = ARRAY_SIZE(fname##_groups), \
+ }
+
+static const struct abx500_function ab8500_ranges_functions[] = {
+ FUNCTION(sysclkreq),
+ FUNCTION(ycbcr),
+ FUNCTION(gpio),
+ FUNCTION(pwmout),
+ FUNCTION(adi1),
+ FUNCTION(usbuicc),
+ FUNCTION(dmic),
+ FUNCTION(extcpena),
+ FUNCTION(apespi),
+ FUNCTION(modsclsda),
+ FUNCTION(hiqclkena),
+ FUNCTION(i2ctrig),
+ FUNCTION(usbvdat),
+};
+
+/*
+ * this table translates what's is in the AB8500 specification regarding the
+ * balls alternate functions (as for DB, default, ALT_A, ALT_B and ALT_C).
+ * ALTERNATE_FUNCTIONS(GPIO_NUMBER, GPIOSEL bit, ALTERNATFUNC bit1, ALTERNATEFUNC bit2, ALTA val, ALTB val, ALTC val),
+ *
+ * example :
+ *
+ * ALTERNATE_FUNCTIONS(13, 4, 3, 4, 0, 1 ,2),
+ * means that pin AB8500_PIN_W17 (pin 13) supports 4 mux (default/ALT_A,
+ * ALT_B and ALT_C), so GPIOSEL and ALTERNATFUNC registers are used to select
+ * the mux. ALTA, ALTB and ALTC val indicates values to write in
+ * ALTERNATFUNC register. We need to specifies these values as SOC
+ * designers didn't apply the same logic on how to select mux in the ABx500
+ * family ....
+ * As this pins supports at least ALT_B mux, default mux is
+ * selected by writing 1 in GPIOSEL bit :
+ *
+ * | GPIOSEL bit=4 | alternatfunc bit2=4 | alternatfunc bit1=3
+ * default | 1 | 0 | 0
+ * alt_A | 0 | 0 | 0
+ * alt_B | 0 | 0 | 1
+ * alt_C | 0 | 1 | 0
+ *
+ * ALTERNATE_FUNCTIONS(8, 7, UNUSED, UNUSED),
+ * means that pin AB8500_PIN_W18 (pin 8) supports 2 mux, so only GPIOSEL
+ * register is used to select the mux. As this pins doesn't support at
+ * least ALT_B mux, default mux is by writing 0 in GPIOSEL bit :
+ *
+ * | GPIOSEL bit=7 | alternatfunc bit2= | alternatfunc bit1=
+ * default | 0 | 0 | 0
+ * alt_A | 1 | 0 | 0
+ */
+
+struct alternate_functions ab8500_alternate_functions[AB8500_GPIO_MAX_NUMBER + 1] = {
+ ALTERNATE_FUNCTIONS(0, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO0 */
+ ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO1, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(2, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO2, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(3, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO3, altA controlled by bit 2*/
+ ALTERNATE_FUNCTIONS(4, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO4, altA controlled by bit 3*/
+ /* bit 4 reserved */
+ ALTERNATE_FUNCTIONS(5, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO5 */
+ ALTERNATE_FUNCTIONS(6, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO6, altA controlled by bit 5*/
+ ALTERNATE_FUNCTIONS(7, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO7, altA controlled by bit 6*/
+ ALTERNATE_FUNCTIONS(8, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO8, altA controlled by bit 7*/
+
+ ALTERNATE_FUNCTIONS(9, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO9, altA controlled by bit 0*/
+ ALTERNATE_FUNCTIONS(10, 1, 0, UNUSED, 0, 1, 0), /* GPIO10, altA and altB controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(11, 2, 1, UNUSED, 0, 1, 0), /* GPIO11, altA and altB controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(12, 3, 2, UNUSED, 0, 1, 0), /* GPIO12, altA and altB controlled by bit 2 */
+ ALTERNATE_FUNCTIONS(13, 4, 3, 4, 0, 1, 2), /* GPIO13, altA altB and altC controlled by bit 3 and 4 */
+ ALTERNATE_FUNCTIONS(14, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO14, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(15, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO15, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(16, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO16, altA controlled by bit 7 */
+ /*
+ * pins 17 to 20 are special case, only bit 0 is used to select
+ * alternate function for these 4 pins.
+ * bits 1 to 3 are reserved
+ */
+ ALTERNATE_FUNCTIONS(17, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO17, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(18, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO18, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(19, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO19, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(20, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO20, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(21, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO21, altA controlled by bit 4 */
+ ALTERNATE_FUNCTIONS(22, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO22, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(23, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO23, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(24, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO24, altA controlled by bit 7 */
+
+ ALTERNATE_FUNCTIONS(25, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO25, altA controlled by bit 0 */
+ /* pin 26 special case, no alternate function, bit 1 reserved */
+ ALTERNATE_FUNCTIONS(26, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* GPIO26 */
+ ALTERNATE_FUNCTIONS(27, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO27, altA controlled by bit 2 */
+ ALTERNATE_FUNCTIONS(28, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO28, altA controlled by bit 3 */
+ ALTERNATE_FUNCTIONS(29, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO29, altA controlled by bit 4 */
+ ALTERNATE_FUNCTIONS(30, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO30, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(31, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO31, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(32, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO32, altA controlled by bit 7 */
+
+ ALTERNATE_FUNCTIONS(33, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO33 */
+ ALTERNATE_FUNCTIONS(34, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO34, altA controlled by bit 1 */
+ /* pin 35 special case, no alternate function, bit 2 reserved */
+ ALTERNATE_FUNCTIONS(35, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* GPIO35 */
+ ALTERNATE_FUNCTIONS(36, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO36, altA controlled by bit 3 */
+ ALTERNATE_FUNCTIONS(37, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO37, altA controlled by bit 4 */
+ ALTERNATE_FUNCTIONS(38, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO38, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(39, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO39, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(40, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO40, altA controlled by bit 7 */
+
+ ALTERNATE_FUNCTIONS(41, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO41, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(42, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO42, altA controlled by bit 1 */
+};
+
+/*
+ * Only some GPIOs are interrupt capable, and they are
+ * organized in discontiguous clusters:
+ *
+ * GPIO6 to GPIO13
+ * GPIO24 and GPIO25
+ * GPIO36 to GPIO41
+ */
+struct abx500_gpio_irq_cluster ab8500_gpio_irq_cluster[] = {
+ GPIO_IRQ_CLUSTER(5, 12, 0), /* GPIO numbers start from 1 */
+ GPIO_IRQ_CLUSTER(23, 24, 0),
+ GPIO_IRQ_CLUSTER(35, 40, 0),
+};
+
+static struct abx500_pinctrl_soc_data ab8500_ranges_soc = {
+ .gpio_ranges = ab8500_pinranges,
+ .gpio_num_ranges = ARRAY_SIZE(ab8500_pinranges),
+ .pins = ab8500_ranges_pins,
+ .npins = ARRAY_SIZE(ab8500_ranges_pins),
+ .functions = ab8500_ranges_functions,
+ .nfunctions = ARRAY_SIZE(ab8500_ranges_functions),
+ .groups = ab8500_ranges_groups,
+ .ngroups = ARRAY_SIZE(ab8500_ranges_groups),
+ .alternate_functions = ab8500_alternate_functions,
+ .gpio_irq_cluster = ab8500_gpio_irq_cluster,
+ .ngpio_irq_cluster = ARRAY_SIZE(ab8500_gpio_irq_cluster),
+ .irq_gpio_rising_offset = AB8500_INT_GPIO6R,
+ .irq_gpio_falling_offset = AB8500_INT_GPIO6F,
+ .irq_gpio_factor = 1,
+};
+
+void __devinit
+abx500_pinctrl_ab8500_init(struct abx500_pinctrl_soc_data **soc)
+{
+ *soc = &ab8500_ranges_soc;
+}
--
1.7.11.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists