[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <F3DBB1B3EF102E4994C89758CFCA32412BACC2@DBDE01.ent.ti.com>
Date: Wed, 16 Jan 2013 08:38:55 +0000
From: "Kumar, Anil" <anilkumar.v@...com>
To: "linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"davinci-linux-open-source@...ux.davincidsp.com"
<davinci-linux-open-source@...ux.davincidsp.com>
CC: "linux@....linux.org.uk" <linux@....linux.org.uk>,
"Nori, Sekhar" <nsekhar@...com>,
"khilman@...prootsystems.com" <khilman@...prootsystems.com>,
"hs@...x.de" <hs@...x.de>, "Kumar, Anil" <anilkumar.v@...com>
Subject: RE: [PATCH V4 1/3] ARM: davinci: da850: add pinctrl driver DT
entries
On Wed, Jan 16, 2013 at 09:18:20, Kumar, Anil wrote:
> For DT, DaVinci platform can use pinctrl-single driver for handling
> padconf registers.
>
> Enable PINCTRL Kconfig for MACH_DA8XX_DT platform. Add required
> pinctrl DT entries in da850 dts file.
>
> Test procedure
> 1)Populate DT file with NAND node information.
> 2)Populate board DT file with pinmux information for NAND.
> 3)Boot and confirm NAND is detected by the kernel.
> 4)cat /proc/mtd to show partitions.
>
> Signed-off-by: Kumar, Anil <anilkumar.v@...com>
> ---
> :100644 100644 37dc5a3... c7609d0... M arch/arm/boot/dts/da850-evm.dts
> :100644 100644 fbada87... e9c6e82... M arch/arm/boot/dts/da850.dtsi
> :100644 100644 0153950... a075b3e... M arch/arm/mach-davinci/Kconfig
> arch/arm/boot/dts/da850-evm.dts | 3 +++
> arch/arm/boot/dts/da850.dtsi | 10 ++++++++++
> arch/arm/mach-davinci/Kconfig | 1 +
> 3 files changed, 14 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
> index 37dc5a3..c7609d0 100644
> --- a/arch/arm/boot/dts/da850-evm.dts
> +++ b/arch/arm/boot/dts/da850-evm.dts
> @@ -15,6 +15,9 @@
> model = "DA850/AM1808/OMAP-L138 EVM";
>
> soc {
> + pmx_core:pinmux@...4120 {
I have found cosmetics issue here. I will correct it and send next version.
> + status = "okay";
> + };
> serial0: serial@...2000 {
> status = "okay";
> };
> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
> index fbada87..e9c6e82 100644
> --- a/arch/arm/boot/dts/da850.dtsi
> +++ b/arch/arm/boot/dts/da850.dtsi
> @@ -29,6 +29,16 @@
> #size-cells = <1>;
> ranges = <0x0 0x01c00000 0x400000>;
>
> + pmx_core:pinmux@...4120 {
I have found cosmetics issue here. I will correct it and send next version.
> + compatible = "pinctrl-single";
> + reg = <0x14120 0x50>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-single,bit-per-mux;
> + pinctrl-single,register-width = <32>;
> + pinctrl-single,function-mask = <0xffffffff>;
> + status = "disabled";
> + };
> serial0: serial@...2000 {
> compatible = "ns16550a";
> reg = <0x42000 0x100>;
> diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
> index 0153950..a075b3e 100644
> --- a/arch/arm/mach-davinci/Kconfig
> +++ b/arch/arm/mach-davinci/Kconfig
> @@ -62,6 +62,7 @@ config MACH_DA8XX_DT
> bool "Support DA8XX platforms using device tree"
> default y
> depends on ARCH_DAVINCI_DA8XX
> + select PINCTRL
> help
> Say y here to include support for TI DaVinci DA850 based using
> Flattened Device Tree. More information at Documentation/devicetree
> --
> 1.7.4.1
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists