linux-kernel - [PATCH v3 08/10] spi/pxa2xx: add support for SPI

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1358850393-23111-9-git-send-email-mika.westerberg@linux.intel.com>
Date:	Tue, 22 Jan 2013 12:26:31 +0200
From:	Mika Westerberg <mika.westerberg@...ux.intel.com>
To:	linux-kernel@...r.kernel.org
Cc:	Grant Likely <grant.likely@...retlab.ca>,
	Eric Miao <eric.y.miao@...il.com>,
	Russell King <linux@....linux.org.uk>,
	Haojian Zhuang <haojian.zhuang@...aro.org>,
	Mark Brown <broonie@...nsource.wolfsonmicro.com>,
	Linus Walleij <linus.walleij@...aro.org>,
	"Rafael J. Wysocki" <rafael.j.wysocki@...el.com>,
	chao.bi@...el.com,
	Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
	cxie4@...vell.com, ytang5@...vell.com,
	Mika Westerberg <mika.westerberg@...ux.intel.com>
Subject: [PATCH v3 08/10] spi/pxa2xx: add support for SPI_LOOP

This is useful when testing the functionality of the controller from userspace
and there aren't any real SPI slave devices connected to the bus.

Signed-off-by: Mika Westerberg <mika.westerberg@...ux.intel.com>
---
 drivers/spi/spi-pxa2xx.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 7f8f939..8a5ba0a 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -846,6 +846,9 @@ static int setup(struct spi_device *spi)
 	chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) ? SSCR1_SPH : 0)
 			| (((spi->mode & SPI_CPOL) != 0) ? SSCR1_SPO : 0);
 
+	if (spi->mode & SPI_LOOP)
+		chip->cr1 |= SSCR1_LBM;
+
 	/* NOTE:  PXA25x_SSP _could_ use external clocking ... */
 	if (!pxa25x_ssp_comp(drv_data))
 		dev_dbg(&spi->dev, "%ld Hz actual, %s\n",
@@ -939,7 +942,7 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
 	master->dev.parent = &pdev->dev;
 	master->dev.of_node = pdev->dev.of_node;
 	/* the spi->mode bits understood by this driver: */
-	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP;
 
 	master->bus_num = ssp->port_id;
 	master->num_chipselect = platform_info->num_chipselect;
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/