| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1359541996-18127-1-git-send-email-pawel.moll@arm.com>
Date: Wed, 30 Jan 2013 10:33:16 +0000
From: Pawel Moll <pawel.moll@....com>
To: Samuel Ortiz <sameo@...ux.intel.com>
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Pawel Moll <pawel.moll@....com>
Subject: [PATCH] mfd: vexpress: Add pseudo-GPIO based LEDs
The LEDs on the Versatile Express motherboard are controlled
through simple memory-mapped register. This patch extends
the pseudo-GPIO controller definition for these lines and
creates generic "leds-gpio" device using them
Signed-off-by: Pawel Moll <pawel.moll@....com>
---
Hello Samuel,
Would you be so kind to take this patch in for 3.9? Or would
you prefer to get it in through arm-soc tree?
Thanks!
Pawel
drivers/mfd/vexpress-sysreg.c | 73 +++++++++++++++++++++++++++++++----------
include/linux/vexpress.h | 8 +++++
2 files changed, 63 insertions(+), 18 deletions(-)
diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c
index 77048b1..51c3ca2 100644
--- a/drivers/mfd/vexpress-sysreg.c
+++ b/drivers/mfd/vexpress-sysreg.c
@@ -49,6 +49,8 @@
#define SYS_ID_HBI_SHIFT 16
#define SYS_PROCIDx_HBI_SHIFT 0
+#define SYS_LED_LED(n) (1 << (n))
+
#define SYS_MCI_CARDIN (1 << 0)
#define SYS_MCI_WPROT (1 << 1)
@@ -348,22 +350,27 @@ void __init vexpress_sysreg_of_early_init(void)
}
+#define VEXPRESS_SYSREG_GPIO(_name, _reg, _value) \
+ [VEXPRESS_GPIO_##_name] = { \
+ .reg = _reg, \
+ .value = _reg##_##_value, \
+ }
+
static struct vexpress_sysreg_gpio {
unsigned long reg;
u32 value;
} vexpress_sysreg_gpios[] = {
- [VEXPRESS_GPIO_MMC_CARDIN] = {
- .reg = SYS_MCI,
- .value = SYS_MCI_CARDIN,
- },
- [VEXPRESS_GPIO_MMC_WPROT] = {
- .reg = SYS_MCI,
- .value = SYS_MCI_WPROT,
- },
- [VEXPRESS_GPIO_FLASH_WPn] = {
- .reg = SYS_FLASH,
- .value = SYS_FLASH_WPn,
- },
+ VEXPRESS_SYSREG_GPIO(MMC_CARDIN, SYS_MCI, CARDIN),
+ VEXPRESS_SYSREG_GPIO(MMC_WPROT, SYS_MCI, WPROT),
+ VEXPRESS_SYSREG_GPIO(FLASH_WPn, SYS_FLASH, WPn),
+ VEXPRESS_SYSREG_GPIO(LED0, SYS_LED, LED(0)),
+ VEXPRESS_SYSREG_GPIO(LED1, SYS_LED, LED(1)),
+ VEXPRESS_SYSREG_GPIO(LED2, SYS_LED, LED(2)),
+ VEXPRESS_SYSREG_GPIO(LED3, SYS_LED, LED(3)),
+ VEXPRESS_SYSREG_GPIO(LED4, SYS_LED, LED(4)),
+ VEXPRESS_SYSREG_GPIO(LED5, SYS_LED, LED(5)),
+ VEXPRESS_SYSREG_GPIO(LED6, SYS_LED, LED(6)),
+ VEXPRESS_SYSREG_GPIO(LED7, SYS_LED, LED(7)),
};
static int vexpress_sysreg_gpio_direction_input(struct gpio_chip *chip,
@@ -372,12 +379,6 @@ static int vexpress_sysreg_gpio_direction_input(struct gpio_chip *chip,
return 0;
}
-static int vexpress_sysreg_gpio_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- return 0;
-}
-
static int vexpress_sysreg_gpio_get(struct gpio_chip *chip,
unsigned offset)
{
@@ -401,6 +402,14 @@ static void vexpress_sysreg_gpio_set(struct gpio_chip *chip,
writel(reg_value, vexpress_sysreg_base + gpio->reg);
}
+static int vexpress_sysreg_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ vexpress_sysreg_gpio_set(chip, offset, value);
+
+ return 0;
+}
+
static struct gpio_chip vexpress_sysreg_gpio_chip = {
.label = "vexpress-sysreg",
.direction_input = vexpress_sysreg_gpio_direction_input,
@@ -412,6 +421,30 @@ static struct gpio_chip vexpress_sysreg_gpio_chip = {
};
+#define VEXPRESS_SYSREG_GREEN_LED(_name, _default_trigger, _gpio) \
+ { \
+ .name = "v2m:green:"_name, \
+ .default_trigger = _default_trigger, \
+ .gpio = VEXPRESS_GPIO_##_gpio, \
+ }
+
+struct gpio_led vexpress_sysreg_leds[] = {
+ VEXPRESS_SYSREG_GREEN_LED("user1", "heartbeat", LED0),
+ VEXPRESS_SYSREG_GREEN_LED("user2", "mmc0", LED1),
+ VEXPRESS_SYSREG_GREEN_LED("user3", "cpu0", LED2),
+ VEXPRESS_SYSREG_GREEN_LED("user4", "cpu1", LED3),
+ VEXPRESS_SYSREG_GREEN_LED("user5", "cpu2", LED4),
+ VEXPRESS_SYSREG_GREEN_LED("user6", "cpu3", LED5),
+ VEXPRESS_SYSREG_GREEN_LED("user7", "cpu4", LED6),
+ VEXPRESS_SYSREG_GREEN_LED("user8", "cpu5", LED7),
+};
+
+struct gpio_led_platform_data vexpress_sysreg_leds_pdata = {
+ .num_leds = ARRAY_SIZE(vexpress_sysreg_leds),
+ .leds = vexpress_sysreg_leds,
+};
+
+
static ssize_t vexpress_sysreg_sys_id_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -456,6 +489,10 @@ static int vexpress_sysreg_probe(struct platform_device *pdev)
return err;
}
+ platform_device_register_data(vexpress_sysreg_dev, "leds-gpio",
+ PLATFORM_DEVID_AUTO, &vexpress_sysreg_leds_pdata,
+ sizeof(vexpress_sysreg_leds_pdata));
+
vexpress_sysreg_dev = &pdev->dev;
device_create_file(vexpress_sysreg_dev, &dev_attr_sys_id);
diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h
index c52215f..7581874 100644
--- a/include/linux/vexpress.h
+++ b/include/linux/vexpress.h
@@ -27,6 +27,14 @@
#define VEXPRESS_GPIO_MMC_CARDIN 0
#define VEXPRESS_GPIO_MMC_WPROT 1
#define VEXPRESS_GPIO_FLASH_WPn 2
+#define VEXPRESS_GPIO_LED0 3
+#define VEXPRESS_GPIO_LED1 4
+#define VEXPRESS_GPIO_LED2 5
+#define VEXPRESS_GPIO_LED3 6
+#define VEXPRESS_GPIO_LED4 7
+#define VEXPRESS_GPIO_LED5 8
+#define VEXPRESS_GPIO_LED6 9
+#define VEXPRESS_GPIO_LED7 10
#define VEXPRESS_RES_FUNC(_site, _func) \
{ \
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists