| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <51122521.2090506@atmel.com>
Date: Wed, 6 Feb 2013 10:40:49 +0100
From: Nicolas Ferre <nicolas.ferre@...el.com>
To: "Yang, Wenyou" <Wenyou.Yang@...el.com>,
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@...osoft.com>
CC: "linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"richard.genoud@...il.com" <richard.genoud@...il.com>,
"Lin, JM" <JM.Lin@...el.com>,
"linux@....linux.org.uk" <linux@....linux.org.uk>
Subject: Re: [v4 PATCH 11/12] ARM: dts: add spi nodes for atmel SoC
On 02/06/2013 02:35 AM, Yang, Wenyou :
>
>
>> -----Original Message-----
>> From: Jean-Christophe PLAGNIOL-VILLARD [mailto:plagnioj@...osoft.com]
>> Sent: 2013年2月6日 3:51
>> To: Yang, Wenyou
>> Cc: linux-arm-kernel@...ts.infradead.org; linux-kernel@...r.kernel.org; Ferre,
>> Nicolas; richard.genoud@...il.com; Lin, JM; linux@....linux.org.uk
>> Subject: Re: [v4 PATCH 11/12] ARM: dts: add spi nodes for atmel SoC
>>
>> On 15:34 Mon 14 Jan , Wenyou Yang wrote:
>>> From: Richard Genoud <richard.genoud@...il.com>
>>>
>>> Signed-off-by: Richard Genoud <richard.genoud@...il.com>
>>> [wenyou.yang@...el.com: add spi nodes for sam9260, sam9263, sam9g45
>> and sam9n12]
>>> [wenyou.yang@...el.com: remove spi property "cs-gpios" to the board dts
>> files]
>>> Signed-off-by: Wenyou Yang <wenyou.yang@...el.com>
>>> Cc: linux@....linux.org.uk
>>> ---
>>> arch/arm/boot/dts/at91sam9260.dtsi | 18 ++++++++++++++++++
>>> arch/arm/boot/dts/at91sam9263.dtsi | 18 ++++++++++++++++++
>>> arch/arm/boot/dts/at91sam9g45.dtsi | 18 ++++++++++++++++++
>> I alreadt have some patch in queue
>>
> Thanks
> I will remove this patch in the next version.
Well, I am not sure:
Jean Christophe, if the patches are in your own queue, I do not see why
this series has to be modified.
The "I already have a patch to address this" type of comment is not a
proper comment:
1/ either you already have submitted the patch (and the new series has
to take it into
account, obviously)
2/ or the patch is not public yet and you now have to deal with this
series posted before
your own one.
There is no a third way...
Best regards,
>>> arch/arm/boot/dts/at91sam9n12.dtsi | 18 ++++++++++++++++++
>>> arch/arm/boot/dts/at91sam9x5.dtsi | 18 ++++++++++++++++++
>>> 5 files changed, 90 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/at91sam9260.dtsi
>> b/arch/arm/boot/dts/at91sam9260.dtsi
>>> index 68bccf4..9586fe1 100644
>>> --- a/arch/arm/boot/dts/at91sam9260.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9260.dtsi
>>> @@ -453,6 +453,24 @@
>>> status = "disabled";
>>> };
>>>
>>> + spi0: spi@...c8000 {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + compatible = "atmel,at91sam9260-spi";
>>> + reg = <0xfffc8000 0x200>;
>>> + interrupts = <12 4 3>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + spi1: spi@...cc000 {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + compatible = "atmel,at91sam9260-spi";
>>> + reg = <0xfffcc000 0x200>;
>>> + interrupts = <13 4 3>;
>>> + status = "disabled";
>>> + };
>>> +
>>> adc0: adc@...e0000 {
>>> compatible = "atmel,at91sam9260-adc";
>>> reg = <0xfffe0000 0x100>;
>>> diff --git a/arch/arm/boot/dts/at91sam9263.dtsi
>> b/arch/arm/boot/dts/at91sam9263.dtsi
>>> index 32ec62c..636b882 100644
>>> --- a/arch/arm/boot/dts/at91sam9263.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9263.dtsi
>>> @@ -426,6 +426,24 @@
>>> reg = <0xfffffd40 0x10>;
>>> status = "disabled";
>>> };
>>> +
>>> + spi0: spi@...a4000 {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + compatible = "atmel,at91sam9260-spi";
>>> + reg = <0xfffa4000 0x200>;
>>> + interrupts = <14 4 3>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + spi1: spi@...a8000 {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + compatible = "atmel,at91sam9260-spi";
>>> + reg = <0xfffa8000 0x200>;
>>> + interrupts = <15 4 3>;
>>> + status = "disabled";
>>> + };
>>> };
>>>
>>> nand0: nand@...00000 {
>>> diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi
>> b/arch/arm/boot/dts/at91sam9g45.dtsi
>>> index 231858f..0100b80 100644
>>> --- a/arch/arm/boot/dts/at91sam9g45.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9g45.dtsi
>>> @@ -495,6 +495,24 @@
>>> reg = <0xfffffd40 0x10>;
>>> status = "disabled";
>>> };
>>> +
>>> + spi0: spi@...a4000 {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + compatible = "atmel,at91sam9g45-spi";
>>> + reg = <0xfffa4000 0x200>;
>>> + interrupts = <14 4 3>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + spi1: spi@...a8000 {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + compatible = "atmel,at91sam9g45-spi";
>>> + reg = <0xfffa8000 0x200>;
>>> + interrupts = <15 4 3>;
>>> + status = "disabled";
>>> + };
>>> };
>>>
>>> nand0: nand@...00000 {
>>> diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi
>> b/arch/arm/boot/dts/at91sam9n12.dtsi
>>> index e9efb34..86d5357 100644
>>> --- a/arch/arm/boot/dts/at91sam9n12.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9n12.dtsi
>>> @@ -355,6 +355,24 @@
>>> #size-cells = <0>;
>>> status = "disabled";
>>> };
>>> +
>>> + spi0: spi@...00000 {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + compatible = "atmel,at91sam9x5-spi";
>>> + reg = <0xf0000000 0x100>;
>>> + interrupts = <13 4 3>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + spi1: spi@...04000 {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + compatible = "atmel,at91sam9x5-spi";
>>> + reg = <0xf0004000 0x100>;
>>> + interrupts = <14 4 3>;
>>> + status = "disabled";
>>> + };
>>> };
>>>
>>> nand0: nand@...00000 {
>>> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi
>> b/arch/arm/boot/dts/at91sam9x5.dtsi
>>> index 40ac3a4..8ea2f7d 100644
>>> --- a/arch/arm/boot/dts/at91sam9x5.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
>>> @@ -473,6 +473,24 @@
>>> trigger-value = <0x6>;
>>> };
>>> };
>>> +
>>> + spi0: spi@...00000 {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + compatible = "atmel,at91sam9x5-spi";
>>> + reg = <0xf0000000 0x100>;
>>> + interrupts = <13 4 3>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + spi1: spi@...04000 {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + compatible = "atmel,at91sam9x5-spi";
>>> + reg = <0xf0004000 0x100>;
>>> + interrupts = <14 4 3>;
>>> + status = "disabled";
>>> + };
>>> };
>>>
>>> nand0: nand@...00000 {
>>> --
>>> 1.7.9.5
>>>
>
> Best Regards,
> Wenyou Yang
>
--
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists