| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <511347E8.2030604@ti.com>
Date: Thu, 7 Feb 2013 11:51:28 +0530
From: Rajendra Nayak <rnayak@...com>
To: Kishon Vijay Abraham I <kishon@...com>
CC: <b-cousson@...com>, <tony@...mide.com>, <linux@....linux.org.uk>,
<rob.herring@...xeda.com>, <rob@...dley.net>, <balbi@...com>,
<linux-usb@...r.kernel.org>, <linux-omap@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-doc@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree-discuss@...ts.ozlabs.org>, <gregkh@...uxfoundation.org>
Subject: Re: [PATCH 3/8] ARM: dts: omap: Add usb_otg and glue data
[]...
>
> diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
> index 29a043e..4688265 100644
> --- a/Documentation/devicetree/bindings/usb/omap-usb.txt
> +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
> @@ -15,6 +15,7 @@ OMAP MUSB GLUE
> represents PERIPHERAL.
> - power : Should be "50". This signifies the controller can supply upto
> 100mA when operating in host mode.
> + - usb-phy : the phandle for the PHY device
>
> SOC specific device node entry
> usb_otg_hs: usb_otg_hs@...ab000 {
> diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
> index 3705a81..cb07583 100644
> --- a/arch/arm/boot/dts/omap3-beagle-xm.dts
> +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
> @@ -107,3 +107,9 @@
> */
> ti,pulldowns = <0x03a1c4>;
> };
> +
> +&usb_otg_hs {
> + interface_type = <0>;
> + mode = <3>;
> + power = <50>;
> +};
> diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
> index e8ba1c2..afb9ba9 100644
> --- a/arch/arm/boot/dts/omap3-evm.dts
> +++ b/arch/arm/boot/dts/omap3-evm.dts
> @@ -59,3 +59,9 @@
> &twl_gpio {
> ti,use-leds;
> };
> +
> +&usb_otg_hs {
> + interface_type = <0>;
> + mode = <3>;
> + power = <50>;
> +};
> diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
> index 89808ce..4b3d157 100644
> --- a/arch/arm/boot/dts/omap3-overo.dtsi
> +++ b/arch/arm/boot/dts/omap3-overo.dtsi
> @@ -55,3 +55,9 @@
> &twl_gpio {
> ti,use-leds;
> };
> +
> +&usb_otg_hs {
> + interface_type = <0>;
> + mode = <3>;
> + power = <50>;
> +};
> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> index 1acc261..b6472f7 100644
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -397,5 +397,17 @@
> ti,timer-alwon;
> ti,timer-secure;
> };
> +
> + usb_otg_hs: usb_otg_hs@...ab000 {
> + compatible = "ti,omap3-musb";
> + reg = <0x480ab000 0x1000>;
> + interrupts = <0 92 0x4>, <0 93 0x4>;
> + interrupt-names = "mc", "dma";
> + ti,hwmods = "usb_otg_hs";
> + usb-phy = <&usb2_phy>;
> + multipoint = <1>;
> + num_eps = <16>;
> + ram_bits = <12>;
Where are these bindings documented? The general convention is to use
a '-' for property names and not '_'
> + };
> };
> };
> diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
> index 4122efe..612c9bb 100644
> --- a/arch/arm/boot/dts/omap4-panda.dts
> +++ b/arch/arm/boot/dts/omap4-panda.dts
> @@ -206,3 +206,9 @@
> &twl_usb_comparator {
> usb-supply = <&vusb>;
> };
> +
> +&usb_otg_hs {
> + interface_type = <1>;
> + mode = <3>;
> + power = <50>;
> +};
> diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
> index 43e5258..582d7ee 100644
> --- a/arch/arm/boot/dts/omap4-sdp.dts
> +++ b/arch/arm/boot/dts/omap4-sdp.dts
> @@ -428,3 +428,9 @@
> &twl_usb_comparator {
> usb-supply = <&vusb>;
> };
> +
> +&usb_otg_hs {
> + interface_type = <1>;
> + mode = <3>;
> + power = <50>;
> +};
> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
> index c829d7e..5171739 100644
> --- a/arch/arm/boot/dts/omap4.dtsi
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -542,5 +542,18 @@
> reg-names = "control_dev_conf", "otghs_control";
> ti,type = <1>;
> };
> +
> + usb_otg_hs: usb_otg_hs@...ab000 {
> + compatible = "ti,omap4-musb";
> + reg = <0x4a0ab000 0x7ff>;
> + interrupts = <0 92 0x4>, <0 93 0x4>;
> + interrupt-names = "mc", "dma";
> + ti,hwmods = "usb_otg_hs";
> + usb-phy = <&usb2_phy>;
> + multipoint = <1>;
> + num_eps = <16>;
> + ram_bits = <12>;
> + ti,has-mailbox;
> + };
> };
> };
> diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
> index ed0bc95..398d2c3 100644
> --- a/arch/arm/boot/dts/twl4030.dtsi
> +++ b/arch/arm/boot/dts/twl4030.dtsi
> @@ -67,7 +67,7 @@
> #interrupt-cells = <1>;
> };
>
> - twl4030-usb {
> + usb2_phy: twl4030-usb {
> compatible = "ti,twl4030-usb";
> interrupts = <10>, <4>;
> usb1v5-supply = <&vusb1v5>;
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists