linux-kernel - [PATCH] usb: correctly enable interrupts for xhci

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1362127974-24487-1-git-send-email-hare@suse.de>
Date:	Fri,  1 Mar 2013 09:52:54 +0100
From:	Hannes Reinecke <hare@...e.de>
To:	linux-usb@...r.kernel.org
Cc:	linux-kernel@...r.kernel.org, Hannes Reinecke <hare@...e.de>,
	Bjorn Helgaas <bhelgaas@...gle.com>,
	Oliver Neukum <oneukum@...e.de>,
	Thomas Renninger <trenn@...e.de>,
	Yinghai Lu <yinghai@...nel.org>,
	Frederik Himpe <fhimpe@....ac.be>,
	David Haerdeman <david@...deman.nu>
Subject: [PATCH] usb: correctly enable interrupts for xhci

xhci might run with MSI/MSI-X only, with no support for legacy
interrupts. On these devices the request_irq() call in usb_add_hcd()
will fail, causing the entire device to fail.
For xhci this is especially painful as the driver will enable
interrupts during xhci_run(), so the initial call to request_irq()
is not required anyway.

This patch adds a flag 'msix_supported' to struct usb_hcd, which
will cause usb_add_hcd() to skip interrupt setup. This flag is
set in xhci-pci, so the registration will skip the first request_irq()
and can proceed.

Cc: Bjorn Helgaas <bhelgaas@...gle.com>
Cc: Oliver Neukum <oneukum@...e.de>
Cc: Thomas Renninger <trenn@...e.de>
Cc: Yinghai Lu <yinghai@...nel.org>
Cc: Frederik Himpe <fhimpe@....ac.be>
Cc: David Haerdeman <david@...deman.nu>
Signed-off-by: Hannes Reinecke <hare@...e.de>

diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 8e64adf..e583444 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2536,7 +2536,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
 	/* enable irqs just before we start the controller,
 	 * if the BIOS provides legacy PCI irqs.
 	 */
-	if (usb_hcd_is_primary_hcd(hcd) && irqnum) {
+	if (usb_hcd_is_primary_hcd(hcd) && irqnum && !hcd->msix_supported) {
 		retval = usb_hcd_request_irqs(hcd, irqnum, irqflags);
 		if (retval)
 			goto err_request_irq;
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index af259e0..a08c0ee 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -183,6 +183,12 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	 */
 	*((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci;
 
+	/*
+	 * Interrupts are setup during xhci_run(), so do not try
+	 * to request an interrupt during hcd init.
+	 */
+	hcd->msix_supported = 1;
+
 	retval = usb_add_hcd(xhci->shared_hcd, dev->irq,
 			IRQF_SHARED);
 	if (retval)
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 0a78df5..eb6bf10 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -124,6 +124,7 @@ struct usb_hcd {
 	/* Flags that get set only during HCD registration or removal. */
 	unsigned		rh_registered:1;/* is root hub registered? */
 	unsigned		rh_pollable:1;	/* may we poll the root hub? */
+	unsigned		msix_supported:1; /* driver supports MSI-X */
 	unsigned		msix_enabled:1;	/* driver has MSI-X enabled? */
 
 	/* The next flag is a stopgap, to be removed when all the HCDs
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/