linux-kernel - Re: [PATCH] usb: correctly enable interrupts for xhci

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20130301105346.GA4050@hardeman.nu>
Date:	Fri, 1 Mar 2013 11:53:46 +0100
From:	David Härdeman <david@...deman.nu>
To:	Hannes Reinecke <hare@...e.de>
Cc:	linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
	Bjorn Helgaas <bhelgaas@...gle.com>,
	Oliver Neukum <oneukum@...e.de>,
	Thomas Renninger <trenn@...e.de>,
	Yinghai Lu <yinghai@...nel.org>,
	Frederik Himpe <fhimpe@....ac.be>
Subject: Re: [PATCH] usb: correctly enable interrupts for xhci

On Fri, Mar 01, 2013 at 09:52:54AM +0100, Hannes Reinecke wrote:
>xhci might run with MSI/MSI-X only, with no support for legacy
>interrupts. On these devices the request_irq() call in usb_add_hcd()
>will fail, causing the entire device to fail.
>For xhci this is especially painful as the driver will enable
>interrupts during xhci_run(), so the initial call to request_irq()
>is not required anyway.
>
>This patch adds a flag 'msix_supported' to struct usb_hcd, which
>will cause usb_add_hcd() to skip interrupt setup. This flag is
>set in xhci-pci, so the registration will skip the first request_irq()
>and can proceed.
>
>Cc: Bjorn Helgaas <bhelgaas@...gle.com>
>Cc: Oliver Neukum <oneukum@...e.de>
>Cc: Thomas Renninger <trenn@...e.de>
>Cc: Yinghai Lu <yinghai@...nel.org>
>Cc: Frederik Himpe <fhimpe@....ac.be>
>Cc: David Haerdeman <david@...deman.nu>
>Signed-off-by: Hannes Reinecke <hare@...e.de>

It doesn't seem to work. I just tried applying the patch to the 3.8
kernel in Debian experimental and this was the result during boot:

[    1.203390] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    1.203393] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    1.203419] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    1.203423] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.203429] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.203533] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.203535] xhci_hcd 0000:00:14.0: request interrupt 255 failed
[    1.203580] xhci_hcd 0000:00:14.0: USB bus 1 deregistered
[    1.203598] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    1.203600] xhci_hcd 0000:00:14.0: init 0000:00:14.0 fail, -22
[    1.203643] xhci_hcd: probe of 0000:00:14.0 failed with error -22

Regards,
David

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/