| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20130313045226.GA15611@roeck-us.net>
Date: Tue, 12 Mar 2013 21:52:26 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: Naveen Krishna Chatradhi <ch.naveen@...sung.com>
Cc: linux-kernel@...r.kernel.org, lm-sensors@...sensors.org,
devicetree-discuss@...ts.ozlabs.org, khali@...ux-fr.org,
dianders@...omium.org, naveenkrishna.ch@...il.com
Subject: Re: [PATCH v4] hwmon: ntc: Add DT with IIO support to NTC thermistor
driver
On Wed, Mar 13, 2013 at 09:38:20AM +0530, Naveen Krishna Chatradhi wrote:
> This patch adds DT support to NTC driver to parse the
> platform data.
>
> Also adds the support to work as an iio device.
>
> During the probe ntc driver gets the respective channels of ADC
> and uses iio_raw_read calls to get the ADC converted value.
>
> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@...sung.com>
Unfortunately there is still something we'll need to sort out:
fs/sysfs/Kconfig:1: symbol SYSFS is selected by AT91_ADC
drivers/iio/adc/Kconfig:85: symbol AT91_ADC depends on IIO
drivers/iio/Kconfig:5: symbol IIO is selected by SENSORS_NTC_THERMISTOR
drivers/hwmon/Kconfig:900: symbol SENSORS_NTC_THERMISTOR depends on HWMON
drivers/hwmon/Kconfig:5: symbol HWMON is selected by EEEPC_LAPTOP
drivers/platform/x86/Kconfig:477: symbol EEEPC_LAPTOP depends on
HOTPLUG_PCI
drivers/pci/hotplug/Kconfig:5: symbol HOTPLUG_PCI depends on SYSFS
So we can not just select IIO. I'll see if I can find a solution.
Guenter
> ---
> Changes since v3:
> 1. Added a NULL check before iio_channel_release
> 2. Modified a return statement
>
> Guenter Roeck, Its wonderful working with you. Thanks.
>
> .../devicetree/bindings/hwmon/ntc_thermistor.txt | 29 ++++
> drivers/hwmon/Kconfig | 1 +
> drivers/hwmon/ntc_thermistor.c | 145 +++++++++++++++++---
> include/linux/platform_data/ntc_thermistor.h | 8 +-
> 4 files changed, 163 insertions(+), 20 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
>
> diff --git a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
> new file mode 100644
> index 0000000..c6f6667
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
> @@ -0,0 +1,29 @@
> +NTC Thermistor hwmon sensors
> +-------------------------------
> +
> +Requires node properties:
> +- "compatible" value : one of
> + "ntc,ncp15wb473"
> + "ntc,ncp18wb473"
> + "ntc,ncp21wb473"
> + "ntc,ncp03wb473"
> + "ntc,ncp15wl333"
> +- "pullup-uv" Pull up voltage in micro volts
> +- "pullup-ohm" Pull up resistor value in ohms
> +- "pulldown-ohm" Pull down resistor value in ohms
> +- "connected-positive" Always ON, If not specified.
> + Status change is possible.
> +- "io-channels" Channel node of ADC to be used for
> + conversion.
> +
> +Read more about iio bindings at
> + Documentation/devicetree/bindings/iio/iio-bindings.txt
> +
> +Example:
> + ncp15wb473@0 {
> + compatible = "ntc,ncp15wb473";
> + pullup-uv = <1800000>;
> + pullup-ohm = <47000>;
> + pulldown-ohm = <0>;
> + io-channels = <&adc 3>;
> + };
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 89ac1cb..cc47c12 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -879,6 +879,7 @@ config SENSORS_MCP3021
>
> config SENSORS_NTC_THERMISTOR
> tristate "NTC thermistor support"
> + select IIO if OF
> help
> This driver supports NTC thermistors sensor reading and its
> interpretation. The driver can also monitor the temperature and
> diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c
> index b5f63f9..a6997a1 100644
> --- a/drivers/hwmon/ntc_thermistor.c
> +++ b/drivers/hwmon/ntc_thermistor.c
> @@ -26,9 +26,16 @@
> #include <linux/math64.h>
> #include <linux/platform_device.h>
> #include <linux/err.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
>
> #include <linux/platform_data/ntc_thermistor.h>
>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/machine.h>
> +#include <linux/iio/driver.h>
> +#include <linux/iio/consumer.h>
> +
> #include <linux/hwmon.h>
> #include <linux/hwmon-sysfs.h>
>
> @@ -37,6 +44,15 @@ struct ntc_compensation {
> unsigned int ohm;
> };
>
> +static const struct platform_device_id ntc_thermistor_id[] = {
> + { "ncp15wb473", TYPE_NCPXXWB473 },
> + { "ncp18wb473", TYPE_NCPXXWB473 },
> + { "ncp21wb473", TYPE_NCPXXWB473 },
> + { "ncp03wb473", TYPE_NCPXXWB473 },
> + { "ncp15wl333", TYPE_NCPXXWL333 },
> + { },
> +};
> +
> /*
> * A compensation table should be sorted by the values of .ohm
> * in descending order.
> @@ -125,6 +141,92 @@ struct ntc_data {
> char name[PLATFORM_NAME_SIZE];
> };
>
> +#ifdef CONFIG_OF
> +static int ntc_adc_iio_read(struct ntc_thermistor_platform_data *pdata)
> +{
> + struct iio_channel *channel = pdata->chan;
> + unsigned int result;
> + int val, ret;
> +
> + ret = iio_read_channel_raw(channel, &val);
> + if (ret < 0) {
> + pr_err("read channel() error: %d\n", ret);
> + return ret;
> + }
> +
> + /* unit: mV */
> + result = pdata->pullup_uV * val;
> + result >>= 12;
> +
> + return result;
> +}
> +
> +static const struct of_device_id ntc_match[] = {
> + { .compatible = "ntc,ncp15wb473",
> + .data = &ntc_thermistor_id[TYPE_NCPXXWB473] },
> + { .compatible = "ntc,ncp18wb473",
> + .data = &ntc_thermistor_id[TYPE_NCPXXWB473] },
> + { .compatible = "ntc,ncp21wb473",
> + .data = &ntc_thermistor_id[TYPE_NCPXXWB473] },
> + { .compatible = "ntc,ncp03wb473",
> + .data = &ntc_thermistor_id[TYPE_NCPXXWB473] },
> + { .compatible = "ntc,ncp15wl333",
> + .data = &ntc_thermistor_id[TYPE_NCPXXWL333] },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, ntc_match);
> +
> +static struct ntc_thermistor_platform_data *
> +ntc_thermistor_parse_dt(struct platform_device *pdev)
> +{
> + struct iio_channel *chan;
> + struct device_node *np = pdev->dev.of_node;
> + struct ntc_thermistor_platform_data *pdata;
> +
> + if (!np)
> + return NULL;
> +
> + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
> + if (!pdata)
> + return ERR_PTR(-ENOMEM);
> +
> + chan = iio_channel_get(&pdev->dev, NULL);
> + if (IS_ERR(chan))
> + return ERR_PTR(PTR_ERR(chan));
> +
> + if (of_property_read_u32(np, "pullup-uv", &pdata->pullup_uV))
> + return ERR_PTR(-ENODEV);
> + if (of_property_read_u32(np, "pullup-ohm", &pdata->pullup_ohm))
> + return ERR_PTR(-ENODEV);
> + if (of_property_read_u32(np, "pulldown-ohm", &pdata->pulldown_ohm))
> + return ERR_PTR(-ENODEV);
> +
> + if (of_find_property(np, "connected-positive", NULL))
> + pdata->connect = NTC_CONNECTED_POSITIVE;
> + else /* status change should be possible if not always on. */
> + pdata->connect = NTC_CONNECTED_GROUND;
> +
> + pdata->chan = chan;
> + pdata->read_uV = ntc_adc_iio_read;
> +
> + return pdata;
> +}
> +static void ntc_iio_channel_release(struct ntc_thermistor_platform_data *pdata)
> +{
> + if (pdata->chan)
> + iio_channel_release(pdata->chan);
> +}
> +#else
> +static struct ntc_thermistor_platform_data *
> +ntc_thermistor_parse_dt(struct platform_device *pdev)
> +{
> + return NULL;
> +}
> +
> +static void ntc_iio_channel_release(struct ntc_thermistor_platform_data *pdata)
> +{ }
> +#endif
> +
> static inline u64 div64_u64_safe(u64 dividend, u64 divisor)
> {
> if (divisor == 0 && dividend == 0)
> @@ -259,7 +361,7 @@ static int ntc_thermistor_get_ohm(struct ntc_data *data)
> return data->pdata->read_ohm();
>
> if (data->pdata->read_uV) {
> - read_uV = data->pdata->read_uV();
> + read_uV = data->pdata->read_uV(data->pdata);
> if (read_uV < 0)
> return read_uV;
> return get_ohm_of_thermistor(data, read_uV);
> @@ -311,9 +413,18 @@ static const struct attribute_group ntc_attr_group = {
>
> static int ntc_thermistor_probe(struct platform_device *pdev)
> {
> + const struct of_device_id *of_id =
> + of_match_device(of_match_ptr(ntc_match), &pdev->dev);
> + const struct platform_device_id *pdev_id;
> + struct ntc_thermistor_platform_data *pdata;
> struct ntc_data *data;
> - struct ntc_thermistor_platform_data *pdata = pdev->dev.platform_data;
> - int ret = 0;
> + int ret;
> +
> + pdata = ntc_thermistor_parse_dt(pdev);
> + if (IS_ERR(pdata))
> + return PTR_ERR(pdata);
> + else if (pdata == NULL)
> + pdata = pdev->dev.platform_data;
>
> if (!pdata) {
> dev_err(&pdev->dev, "No platform init data supplied.\n");
> @@ -349,11 +460,13 @@ static int ntc_thermistor_probe(struct platform_device *pdev)
> if (!data)
> return -ENOMEM;
>
> + pdev_id = of_id ? of_id->data : platform_get_device_id(pdev);
> +
> data->dev = &pdev->dev;
> data->pdata = pdata;
> - strlcpy(data->name, pdev->id_entry->name, sizeof(data->name));
> + strlcpy(data->name, pdev_id->name, sizeof(data->name));
>
> - switch (pdev->id_entry->driver_data) {
> + switch (pdev_id->driver_data) {
> case TYPE_NCPXXWB473:
> data->comp = ncpXXwb473;
> data->n_comp = ARRAY_SIZE(ncpXXwb473);
> @@ -364,8 +477,7 @@ static int ntc_thermistor_probe(struct platform_device *pdev)
> break;
> default:
> dev_err(&pdev->dev, "Unknown device type: %lu(%s)\n",
> - pdev->id_entry->driver_data,
> - pdev->id_entry->name);
> + pdev_id->driver_data, pdev_id->name);
> return -EINVAL;
> }
>
> @@ -384,39 +496,34 @@ static int ntc_thermistor_probe(struct platform_device *pdev)
> goto err_after_sysfs;
> }
>
> - dev_info(&pdev->dev, "Thermistor %s:%d (type: %s/%lu) successfully probed.\n",
> - pdev->name, pdev->id, pdev->id_entry->name,
> - pdev->id_entry->driver_data);
> + dev_info(&pdev->dev, "Thermistor type: %s successfully probed.\n",
> + pdev->name);
> +
> return 0;
> err_after_sysfs:
> sysfs_remove_group(&data->dev->kobj, &ntc_attr_group);
> + ntc_iio_channel_release(pdata);
> return ret;
> }
>
> static int ntc_thermistor_remove(struct platform_device *pdev)
> {
> struct ntc_data *data = platform_get_drvdata(pdev);
> + struct ntc_thermistor_platform_data *pdata = data->pdata;
>
> hwmon_device_unregister(data->hwmon_dev);
> sysfs_remove_group(&data->dev->kobj, &ntc_attr_group);
> + ntc_iio_channel_release(pdata);
> platform_set_drvdata(pdev, NULL);
>
> return 0;
> }
>
> -static const struct platform_device_id ntc_thermistor_id[] = {
> - { "ncp15wb473", TYPE_NCPXXWB473 },
> - { "ncp18wb473", TYPE_NCPXXWB473 },
> - { "ncp21wb473", TYPE_NCPXXWB473 },
> - { "ncp03wb473", TYPE_NCPXXWB473 },
> - { "ncp15wl333", TYPE_NCPXXWL333 },
> - { },
> -};
> -
> static struct platform_driver ntc_thermistor_driver = {
> .driver = {
> .name = "ntc-thermistor",
> .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(ntc_match),
> },
> .probe = ntc_thermistor_probe,
> .remove = ntc_thermistor_remove,
> diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h
> index 88734e8..fa95f9c 100644
> --- a/include/linux/platform_data/ntc_thermistor.h
> +++ b/include/linux/platform_data/ntc_thermistor.h
> @@ -21,6 +21,8 @@
> #ifndef _LINUX_NTC_H
> #define _LINUX_NTC_H
>
> +struct iio_channel;
> +
> enum ntc_thermistor_type {
> TYPE_NCPXXWB473,
> TYPE_NCPXXWL333,
> @@ -39,13 +41,17 @@ struct ntc_thermistor_platform_data {
> * described at Documentation/hwmon/ntc_thermistor
> *
> * pullup/down_ohm: 0 for infinite / not-connected
> + *
> + * chan: iio_channel pointer to communicate with the ADC which the
> + * thermistor is using for conversion of the analog values.
> */
> - int (*read_uV)(void);
> + int (*read_uV)(struct ntc_thermistor_platform_data *);
> unsigned int pullup_uV;
>
> unsigned int pullup_ohm;
> unsigned int pulldown_ohm;
> enum { NTC_CONNECTED_POSITIVE, NTC_CONNECTED_GROUND } connect;
> + struct iio_channel *chan;
>
> int (*read_ohm)(void);
> };
> --
> 1.7.9.5
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists