Message-ID: <51651913.4040007@jp.fujitsu.com>
Date:	Wed, 10 Apr 2013 16:47:31 +0900
From:	Kamezawa Hiroyuki <kamezawa.hiroyu@...fujitsu.com>
To:	Mel Gorman <mgorman@...e.de>
CC:	Andrew Morton <akpm@...ux-foundation.org>,
	Jiri Slaby <jslaby@...e.cz>,
	Valdis Kletnieks <Valdis.Kletnieks@...edu>,
	Rik van Riel <riel@...hat.com>,
	Zlatko Calusic <zcalusic@...sync.net>,
	Johannes Weiner <hannes@...xchg.org>,
	dormando <dormando@...ia.net>,
	Satoru Moriya <satoru.moriya@....com>,
	Michal Hocko <mhocko@...e.cz>, Linux-MM <linux-mm@...ck.org>,
	LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 03/10] mm: vmscan: Flatten kswapd priority loop

(2013/04/09 20:06), Mel Gorman wrote:
> kswapd stops raising the scanning priority when at least SWAP_CLUSTER_MAX
> pages have been reclaimed or the pgdat is considered balanced. It then
> rechecks if it needs to restart at DEF_PRIORITY and whether high-order
> reclaim needs to be reset. This is not wrong per-se but it is confusing
> to follow and forcing kswapd to stay at DEF_PRIORITY may require several
> restarts before it has scanned enough pages to meet the high watermark even
> at 100% efficiency. This patch irons out the logic a bit by controlling
> when priority is raised and removing the "goto loop_again".
> 
> This patch has kswapd raise the scanning priority until it is scanning
> enough pages that it could meet the high watermark in one shrink of the
> LRU lists if it is able to reclaim at 100% efficiency. It will not raise
> the scanning prioirty higher unless it is failing to reclaim any pages.
> 
> To avoid infinite looping for high-order allocation requests kswapd will
> not reclaim for high-order allocations when it has reclaimed at least
> twice the number of pages as the allocation request.
> 
> Signed-off-by: Mel Gorman <mgorman@...e.de>
> ---
>   mm/vmscan.c | 85 +++++++++++++++++++++++++++++--------------------------------
>   1 file changed, 40 insertions(+), 45 deletions(-)
> 
> diff --git a/mm/vmscan.c b/mm/vmscan.c
> index 0742c45..78268ca 100644
> --- a/mm/vmscan.c
> +++ b/mm/vmscan.c
> @@ -2633,8 +2633,12 @@ static bool prepare_kswapd_sleep(pg_data_t *pgdat, int order, long remaining,
>   /*
>    * kswapd shrinks the zone by the number of pages required to reach
>    * the high watermark.
> + *
> + * Returns true if kswapd scanned at least the requested number of pages to
> + * reclaim. This is used to determine if the scanning priority needs to be
> + * raised.
>    */
> -static void kswapd_shrink_zone(struct zone *zone,
> +static bool kswapd_shrink_zone(struct zone *zone,
>   			       struct scan_control *sc,
>   			       unsigned long lru_pages)
>   {
> @@ -2654,6 +2658,8 @@ static void kswapd_shrink_zone(struct zone *zone,
>   
>   	if (nr_slab == 0 && !zone_reclaimable(zone))
>   		zone->all_unreclaimable = 1;
> +
> +	return sc->nr_scanned >= sc->nr_to_reclaim;
>   }
>   
>   /*
> @@ -2680,26 +2686,25 @@ static void kswapd_shrink_zone(struct zone *zone,
>   static unsigned long balance_pgdat(pg_data_t *pgdat, int order,
>   							int *classzone_idx)
>   {
> -	bool pgdat_is_balanced = false;
>   	int i;
>   	int end_zone = 0;	/* Inclusive.  0 = ZONE_DMA */
>   	unsigned long nr_soft_reclaimed;
>   	unsigned long nr_soft_scanned;
>   	struct scan_control sc = {
>   		.gfp_mask = GFP_KERNEL,
> +		.priority = DEF_PRIORITY,
>   		.may_unmap = 1,
>   		.may_swap = 1,
> +		.may_writepage = !laptop_mode,
>   		.order = order,
>   		.target_mem_cgroup = NULL,
>   	};
> -loop_again:
> -	sc.priority = DEF_PRIORITY;
> -	sc.nr_reclaimed = 0;
> -	sc.may_writepage = !laptop_mode;
>   	count_vm_event(PAGEOUTRUN);
>   
>   	do {
>   		unsigned long lru_pages = 0;
> +		unsigned long nr_reclaimed = sc.nr_reclaimed = 0;
> +		bool raise_priority = true;
>   
>   		/*
>   		 * Scan in the highmem->dma direction for the highest
> @@ -2741,10 +2746,8 @@ loop_again:
>   			}
>   		}
>   
> -		if (i < 0) {
> -			pgdat_is_balanced = true;
> +		if (i < 0)
>   			goto out;
> -		}
>   
>   		for (i = 0; i <= end_zone; i++) {
>   			struct zone *zone = pgdat->node_zones + i;
> @@ -2811,8 +2814,16 @@ loop_again:
>   
>   			if ((buffer_heads_over_limit && is_highmem_idx(i)) ||
>   			    !zone_balanced(zone, testorder,
> -					   balance_gap, end_zone))
> -				kswapd_shrink_zone(zone, &sc, lru_pages);
> +					   balance_gap, end_zone)) {
> +				/*
> +				 * There should be no need to raise the
> +				 * scanning priority if enough pages are
> +				 * already being scanned that high
> +				 * watermark would be met at 100% efficiency.
> +				 */
> +				if (kswapd_shrink_zone(zone, &sc, lru_pages))
> +					raise_priority = false;

priority will be raised up enough to scan the amount of "high" watermark
and will not get larger than that if some pages are reclaimed ?

Thanks,
-Kame


> +			}
>   
>   			/*
>   			 * If we're getting trouble reclaiming, start doing
> @@ -2847,46 +2858,29 @@ loop_again:
>   				pfmemalloc_watermark_ok(pgdat))
>   			wake_up(&pgdat->pfmemalloc_wait);
>   
> -		if (pgdat_balanced(pgdat, order, *classzone_idx)) {
> -			pgdat_is_balanced = true;
> -			break;		/* kswapd: all done */
> -		}
> -
>   		/*
> -		 * We do this so kswapd doesn't build up large priorities for
> -		 * example when it is freeing in parallel with allocators. It
> -		 * matches the direct reclaim path behaviour in terms of impact
> -		 * on zone->*_priority.
> +		 * Fragmentation may mean that the system cannot be rebalanced
> +		 * for high-order allocations in all zones. If twice the
> +		 * allocation size has been reclaimed and the zones are still
> +		 * not balanced then recheck the watermarks at order-0 to
> +		 * prevent kswapd reclaiming excessively. Assume that a
> +		 * process requested a high-order can direct reclaim/compact.
>   		 */
> -		if (sc.nr_reclaimed >= SWAP_CLUSTER_MAX)
> -			break;
> -	} while (--sc.priority >= 0);
> -
> -out:
> -	if (!pgdat_is_balanced) {
> -		cond_resched();
> +		if (order && sc.nr_reclaimed >= 2UL << order)
> +			order = sc.order = 0;
>   
> -		try_to_freeze();
> +		/* Check if kswapd should be suspending */
> +		if (try_to_freeze() || kthread_should_stop())
> +			break;
>   
>   		/*
> -		 * Fragmentation may mean that the system cannot be
> -		 * rebalanced for high-order allocations in all zones.
> -		 * At this point, if nr_reclaimed < SWAP_CLUSTER_MAX,
> -		 * it means the zones have been fully scanned and are still
> -		 * not balanced. For high-order allocations, there is
> -		 * little point trying all over again as kswapd may
> -		 * infinite loop.
> -		 *
> -		 * Instead, recheck all watermarks at order-0 as they
> -		 * are the most important. If watermarks are ok, kswapd will go
> -		 * back to sleep. High-order users can still perform direct
> -		 * reclaim if they wish.
> +		 * Raise priority if scanning rate is too low or there was no
> +		 * progress in reclaiming pages
>   		 */
> -		if (sc.nr_reclaimed < SWAP_CLUSTER_MAX)
> -			order = sc.order = 0;
> -
> -		goto loop_again;
> -	}
> +		if (raise_priority || sc.nr_reclaimed - nr_reclaimed == 0)
> +			sc.priority--;
> +	} while (sc.priority >= 0 &&
> +		 !pgdat_balanced(pgdat, order, *classzone_idx));
>   
>   	/*
>   	 * If kswapd was reclaiming at a higher order, it has the option of
> @@ -2915,6 +2909,7 @@ out:
>   			compact_pgdat(pgdat, order);
>   	}
>   
> +out:
>   	/*
>   	 * Return the order we were reclaiming at so prepare_kswapd_sleep()
>   	 * makes a decision on the order we were last reclaiming at. However,
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists